Vestax VCI – 100

HOW TO SET UP?

The system must recognize your Vestax VCI – 100 before configuring in DJ ProMixer.
IMPORTANT: Vestax VCI – 100 is a MIDI Device (It has not integrated audio device/s) For audio configuration choose your work mode and audio sound card/s).

MIDI CONFIGURATION

DJ ProMixer MIDI Vestax VCI-100

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (VESTAX VCI 100 MIDI0) and select on the right side VESTAX VCI 100.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

Overview

DJ ProMixer Vestax VCI-100 map

 

1.-   PLAY
2.-   PAUSE
3.-   CUE
4.-   CUE / LOOP MEMORY
5.-   PITCH
6.-   AUTO LOOP (X4)
7.-   KEYLOCK
8.-   VINYL MODE
9.-   SYNC

TRACKLIST DETAIL

DJ ProMixer Vestax VCI-100 bowser detail map

______________________________________________________________________

10.- CHANGE FOCUS TREE / TRACKLIST
11.- ENTER TREE / TRACKLIST
12.- TRACKLIST UP
13.- TRACKLIST DOWN
14.- LOAD TRACK A
15.- LOAD TRACK B
16.- EXIT / RELOOP (A / B)
17.- AUTO LOOP 1/2 (A / B)
18.- AUTO LOOP X2 (A / B)
______________________________________________________________________

19.- PFL
20.- HEADPHONES VOLUMEN

FX / CUE DETAIL

DJ ProMixer FX CUE Vestax VCI 100 Detail

______________________________________________________________________

21.- SELECTOR FX-A / FX-B / CUE
22.- SELECTOR A POSITION (RED):   DECK A FX 1: ECHO
22.- SELECTOR B POSITION (BLUE): DECK B FX 1: ECHO
22.- SELECTOR mas POSITION (WHITE): DECK A CUE / LOOP MEM MOVE “<”
23.- SELECTOR A POSITION (RED):   DECK A FX 2: FLANGER
23.- SELECTOR B POSITION (BLUE): DECK B FX 2: FLANGER
23.- SELECTOR mas POSITION (WHITE): DECK A CUE / LOOP MEM MOVE “>”
24.- SELECTOR A POSITION (RED):   DECK A FX 3: WAH
24.- SELECTOR B POSITION (BLUE): DECK B FX 3: WAH
24.- SELECTOR mas POSITION (WHITE): DECK B CUE / LOOP MEM MOVE “<”
25.- SELECTOR mas POSITION (WHITE): DECK B CUE / LOOP MEM MOVE “>”
26.- SELECTOR A POSITION (RED):   DECK A FX DRY/WET
26.- SELECTOR B POSITION (BLUE): DECK B FX DRY/WET
27.- SELECTOR A POSITION (RED):   DECK A FX PARAMETER
27.- SELECTOR B POSITION (BLUE): DECK B FX PARAMETER
______________________________________________________________________

28.- WHEELS
29.- VOLUMEN CONTROLS AND CROSSFADER
30.- ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS) / KILL = PUSH (HI, MID, BASS)

info mapping                    info PDF

Advertisements

Denon DN-S 1200

HOW TO SET UP?

The system must recognize your Denon DN S 1200 device/s before configuring in DJ ProMixer.
IMPORTANT: Denon DN S 1200 is a MIDI and audio sound card device
Download and install DENON DJ ASIO Driver

DJ ProMixer Denon ASIO Panel

MIDI CONFIGURATION

Single Mode (2 Denon S 1200 Connected)

DJ ProMixer MIDI Denon DN S 1200 Single

Select in MIDI PORT / MIDI MAP 1 on the left side one device (Denon DN S 1200 0) and select on the right side DENON DN S 1200 (SINGLE A).XML. Select in MIDI PORT / MIDI MAP 2 on the left side the other device (Denon DN S 1200 I) and select on the right side DENON DN S 1200 (SINGLE B).XML

Dual Mode

DJ ProMixer MIDI Denon DN S 1200 Dual

Select in MIDI PORT / MIDI MAP 1 on the left side Numark DENON DN S 12000, and select on the right side DENON DN S 1200 (A AND B).XML. Nothing selected in MIDI PORT / MIDI MAP 2 How to change the decks? Two ways: 1.- Hardware: Use the “Single Button”. 2.- Software: By clicking the headphone button of the deck.

AUDIO CONFIGURATION

DJ ProMixer ASIO Denon DN S 1200

Open DJ ProMixer and go to “Config”, open “Audio Setup”, here you can select your Denon DN S 1200 as Audio Sound Card.
IMPORTANT: Denon DN S 1200 works with ASIO Driver, also it can be used with Direct Sound Driver Mode.

MIDI MAP

DJ ProMixer Denon S 1200 map

1.-   PLAY / PAUSE
2.-   CUE
 
3.-   SYNC
 
4.-   MANUAL LOOP: IN
5.-   MANUAL LOOP: OUT
6.-   AUTO LOOP: 1/2
7.-   AUTO LOOP: 2X
8.-   EXIT / RELOOP
9.-   FX 1: ECHO
10.- FX 2: FLANGER
11.- FX 3: WAH

12.- MEMORY CUE / LOOP
13.- SEARCH MODE
14.- SCROLL
15.- PUSH: LOAD / ENTER
16.- CHANGE FOCUS TREE / TRACKLIST

17.- CHANGE FOCUS PLAYLIST / GROUPS-SUBGROUPS / EXPLORER 
18.- PITCH

19.- KEYLOCK
20.- PITCH BEND (BUTTONS)
21.- SCRATCH MODE (WHEEL)
22.- BEND (WHEEL)
23.- BRAKE
24.- REVERSE
25.- DECK SELECTOR (DECK A / DECK B) (ONLY DUAL MODE)
27.- LINK TO PC (SOURCE)

info mapping                    info PDF

Hercules DJ Control MP3

HOW TO SET UP?

The system must recognize your Hercules DJ Control MP3 as HID device before configuring in DJ ProMixer.

Hercules DJ Control MP3 only requires download and install Hercules Driver, once installed you can configure it in DJ ProMixer.

IMPORTANT: Hercules DJ Control MP3 is a MIDI Device (have not integrated audio device/s) For audio configuration choose your work mode and audio sound card/s).

HID SET UP

Hercules DJ Console Mk2 has two HID maps:

1.- Normal: Respecting the name of the serigraphy
 DJ ProMixer HID Hercules DJ Control MP3 (Normal)

In “Config” go to “HID Controllers” and then select in HID PORT / HID MAP 1 on the left side one device (HERCULES DJ CONSOLE MK2 MID0) and select on the right side HERCULES DJ CONSOLE MK2 (NORMAL).XML. HID PORT / HID MAP 2: Nothing Selected.

2.- Pitch Inverse: Inverting Pitch / Volume

DJ ProMixer HID Hercules DJ Control MP3 (Inverse)

In “Config” go to “HID Controllers” and then select in HID PORT / HID MAP 1 on the left side one device (HERCULES DJ CONSOLE MK2 MID0) and select on the right side HERCULES DJ CONSOLE MK2 (PITCH INVERSE).XML. HID PORT / HID MAP 2: Nothing Selected.

HID MAP

DJ ProMixer Hercules DJ Control MP3 map

 Overview

Detail

DJ ProMixer Hercules DJ Control MP3 map detail


1.-   PLAY / PAUSE
2.-   CUE
3.-   SYNC
4.-   MOVE WITH ACTIVE FUNCTION (CUE/LOOP MEMORY  OR ACTIVE AUTO LOOP
5.-   BEND (BUTTONS)
6.-   PITCH (NORMAL MAP)
6.-   VOLUMEN (PITCH INVERSE MAP)
7.-   VOLUMEN (NORMAL MAP)
7.-   PITCH (PITCH INVERSE)
8.-   PAD BUTTON SELECTOR: OFF
BUTTON 1 – SAMPLE 1
BUTTON 2 – SAMPLE 2
BUTTON 3 – SAMPLE 3
8.-   PAD BUTTON SELECTOR: POSITION “FX” (RED LIGHT)
BUTTON 1 – FX 1 (ECHO)
BUTTON 2 – FX 2 (FLANGER)
BUTTON 3 – FX 3 (WAH)
8.-   PAD BUTTON SELECTOR: POSITION “CUE” (YELLOW LIGHT)
BUTTON 1 – CUE / LOOP 1
BUTTON 2 – CUE / LOOP 2
BUTTON 3 – CUE / LOOP 3
8.-   PAD BUTTON SELECTOR: POSITION “LOOP” (GREEN LIGHT)
BUTTON 1 – LOOP IN
BUTTON 2 – LOOP OUT
BUTTON 3 – EXIT / RELOOP

9.-   KEYLOCK
10.- LOAD DECK
11.- ROTARY KNOBS OF THE MIXER (EQ HI, MID,BASS)
12.- CROSSFADER
13.- PFL
14.- WHEEL

info mapping                    info PDF

Hercules DJ Console MK2

HOW TO SET UP?

The system must recognize your Hercules DJ Console MK2 as Audio and HID device before configuring in DJ ProMixer.

Hercules DJ Console MK2 only requires download and install Hercules ASIO Driver, once installed you can configure it in DJ ProMixer.

CONFIGURATION

Hercules DJ Console MK2 has two different set up (for Internal or External Mode):

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Hercules DJ Console MK2 as Audio Sound Card.

AUDIO SETTINGS

INTERNAL MODE (Master + Headphones)

DJ ProMixer ASIO Hercules DJ 4Set

DJ ProMixer Hercules DJ Console MK2 audio connections 2

For Internal Mode choose your output: 1.-  RCA or  2.- 1/8  TSR connector.

Connect your headphones in front ( ¼ TSR stereo connector).

EXTERNAL MODE (Deck A + Deck B connected to external mixer)

DJ ProMixer ASIO Hercules DJ 4Set Multi Channel External Mixer

DJ ProMixer Hercules DJ Console MK2 audio connections

For External Mode choose your outputs: Deck 1.- (1) RCA or (2) 1/8 TSR connector  Deck 2.-  (3) RCA or 1/8 TSR connector

Important: Hercules DJ Console MK2 is designed to be used as internal mode (with internal Sound Card using master output  & headphones) or external mode (using the internal soundcard for each deck).

HID SET UP

Hercules DJ Console Mk2 has two HID maps:

1.- Normal: Respecting the name of the serigraphy

DJ ProMixer HID Hercules DJ Console MK2 (Normal)

In “Config” go to “HID Controllers” and then select in HID PORT / HID MAP 1 on the left side one device (HERCULES DJ CONSOLE MK2 MID0) and select on the right side HERCULES DJ CONSOLE MK2 (NORMAL).XML. HID PORT / HID MAP 2: Nothing Selected.

2.- Pitch Inverse: Inverting Pitch / Volume

DJ ProMixer HID Hercules DJ Console MK2 (Inverse)

In “Config” go to “HID Controllers” and then select in HID PORT / HID MAP 1 on the left side one device (HERCULES DJ CONSOLE MK2 MID0) and select on the right side HERCULES DJ CONSOLE MK2 (PITCH INVERSE).XML. HID PORT / HID MAP 2: Nothing Selected.

HID MAP

DJ ProMixer Hercules DJ Console MK2 map

Overview

Detail

DJ ProMixer Hercules DJ Console MK2 map detail


1.-   PLAY / PAUSE
2.-   CUE
3.-   SYNC
4.-   MOVE WITH ACTIVE FUNCTION (CUE/LOOP MEMORY  OR ACTIVE AUTO LOOP
5.-   BEND (BUTTONS)
6.-   PITCH (NORMAL MAP)
6.-   VOLUMEN (PITCH INVERSE MAP)
7.-   VOLUMEN (NORMAL MAP)
7.-   PITCH (PITCH INVERSE)
8.-   PAD BUTTON SELECTOR: OFF
BUTTON 1 – SAMPLE 1
BUTTON 2 – SAMPLE 2
BUTTON 3 – SAMPLE 3
8.-   PAD BUTTON SELECTOR: POSITION “FX” (RED LIGHT)
BUTTON 1 – FX 1 (ECHO)
BUTTON 2 – FX 2 (FLANGER)
BUTTON 3 – FX 3 (WAH)
8.-   PAD BUTTON SELECTOR: POSITION “CUE” (YELLOW LIGHT)
BUTTON 1 – CUE / LOOP 1
BUTTON 2 – CUE / LOOP 2
BUTTON 3 – CUE / LOOP 3
8.-   PAD BUTTON SELECTOR: POSITION “LOOP” (GREEN LIGHT)
BUTTON 1 – LOOP IN
BUTTON 2 – LOOP OUT
BUTTON 3 – EXIT / RELOOP

9.-   KEYLOCK
10.- LOAD DECK
11.- ROTARY KNOBS OF THE MIXER (EQ HI, MID,BASS)
12.- CROSSFADER
13.- SOURCE AUDIO SOUND CARD (DECK A / B)
14.- WHEEL

info mapping                    info PDF

Hercules DJ Console MK4

HOW TO SET UP?

The system must recognize your Hercules DJ Console MK4 as Audio and MIDI device before configuring in DJ ProMixer.

Hercules DJ Console MK4 only requires download and install Hercules ASIO Driver, once installed you can configure it in DJ ProMixer.

CONFIGURATION

Hercules DJ Console MK4 has two different set up (for Internal or External Mode):

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Hercules DJ Console MK4 as Audio Sound Card.

AUDIO SETTINGS

INTERNAL MODE (Master + Headphones)

DJ ProMixer ASIO Hercules DJ 4Set

DJ ProMixer Hercules DJ Control MK4 audio connections

For Internal Mode choose your output: 1.-  RCA or  2.- 1/8  TSR connector.

Connect your headphones in front ( ¼ TSR stereo connector).

EXTERNAL MODE (Deck A + Deck B connected to external mixer)

DJ ProMixer ASIO Hercules DJ 4Set Multi Channel External Mixer

DJ ProMixer Hercules DJ Control MK4 audio connections 2

 

For External Mode choose your outputs: Deck 1.- (1) RCA or (2) 1/8 TSR connector  Deck 2.-  (3) RCA

Important: Hercules DJ Console MK4 is designed to be used as internal mode (with internal Sound Card using master output  & headphones) or external mode (using the internal soundcard for each deck).

MIDI SET UP

DJ ProMixer MIDI Hercules DJ Console MK4

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (HERCULES DJ CONSOLE MK4 MID0) and select on the right side HERCULES DJ CONSOLE MK4.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

DJ ProMixer Hercules DJ Control MK4 mapOverview

Detail

DJ ProMixer Hercules DJ Control MK4 map detail

1.-   PLAY / PAUSE
2.-   CUE
3.-   SYNC
4.-   MOVE WITH ACTIVE FUNCTION (CUE/LOOP MEMORY  OR ACTIVE AUTO LOOP
5.-   PITCH
6.-   BEND (BUTTONS)
7.-   PAD MODE SELECTOR: OFF – LOOP ACTIVE , ON – FX ACTIVE
8.-   PAD MODE SELECTOR OFF: LOOP ACTIVE
PAD 1 – 1/2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
PAD 2 – X2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
PAD 3 – MANUAL LOOP: IN
PAD 4 – MANUAL LOOP: OUT / EXIT / RELOOP
9.-   PAD MODE SELECTOR ON: FX ACTIVE
PAD 1 – FX 1 (ECHO)
PAD 2 – FX 2 (FLANGER)

PAD 3 – FX 3 (WAH)
10.- SOURCE AUDIO SOUND CARD (DECK A / B)
11.- BEND (WHEEL)
12.- SCRATCH
13.- ENABLE MIC (AUDIO SOUND CARD)
14.- SCRATCH A / B (BUTTON)
15.- CHANGE FOCUS TREE / TRACKLIST
16.- OPEN PLAYLIST
17.- TRACKLIST MOVE UP
18.- TRACKLIST MOVE DOWN
19.-  LOAD DECK
20.-  PFL
21.-  ROTARY KNOBS OF THE MIXER (EQ HI, MID,BASS)
22.-  DECK´S VOLUMEN CONTROLS AND CROSSFADER


info mapping                    info PDF

Hercules DJ Console Steel

HOW TO SET UP?

The system must recognize your Hercules DJ Console Steel as MIDI device before configuring in DJ ProMixer.

Hercules DJ Console Steel only requires download and install Hercules Driver, once installed you can configure it in DJ ProMixer.

IMPORTANT: Hercules DJ Console Steel has not integrated audio device/s. For audio configuration choose your work mode and audio sound card/s.

MIDI SET UP

DJ ProMixer MIDI Hercules DJ Console Steel

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (HERCULES DJ CONSOLE STEEL MID0) and select on the right side HERCULES DJ CONSOLE STEEL.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

DJ ProMixer Hercules DJ Console Steel map

Overview

Detail

DJ ProMixer Hercules DJ Console Steel map detail

1.-   PLAY
2.-   PAUSE
3.-   CUE
4.-   SYNC
5.-   PITCH
6.-   BEND (BUTTONS)
7.-   1/2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
7.-   (SHIFT ENABLED) MEMORY CUE / LOOP 1
8.-   X2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
8.-   (SHIFT ENABLED) MEMORY CUE / LOOP 2
9.-   MANUAL LOOP: IN
9.-   (SHIFT ENABLED) MEMORY CUE / LOOP 3
10.- MANUAL LOOP: OUT / EXIT / RELOOP
10.- (SHIFT ENABLED) MEMORY CUE / LOOP 4
11.- FX 1: ECHO
11.- (SHIFT ENABLED) SAMPLE 1
12.- FX 2: FLANGER
12.- (SHIFT ENABLED) SAMPLE 2

13.- MOVE WITH ACTIVE FUNCTION (CUE/LOOP MEMORY  OR ACTIVE AUTO LOOP)
14.- BEND (WHEEL)
15.- SCRATCH
16.- SCRATCH (BUTTON)
17.- CHANGE FOCUS TREE / TRACKLIST
18.- OPEN PLAYLIST

19.- TRACKLIST MOVE UP
20.- TRACKLIST MOVE DOWN
21.- LOAD DECK
22.- KILL (EQ. TREBLE)
23.- KILL (EQ. MID)
24.- KILL (EQ. BASS)
25.- PFL
26.- ROTARY KNOBS OF THE MIXER (EQ HI, MID,BASS)
27.- GAIN

28.- DECK´S VOLUMEN A / B
29.- SHIFT
30.- FX DRY / WET (DECK A / B)
31.- FX PARAMETER (DECK A / B)
32.- DECK SELECTOR (A / B) FX DRY / WET – FX PARAMETER
33.- SAMPLER VOLUMEN
34.- CROSSFADER
35.- PFL / CUE MIX: LEFT (DECK A) / RIGHT (DECK B)
36.- HEADPHONES VOLUMEN A / B

info mapping                    info PDF

Hercules DJ Console RMX

HOW TO SET UP?

The system must recognize your Hercules DJ Console RMX as Audio and MIDI device before configuring in DJ ProMixer.

Hercules DJ Console RMX only requires download and install Hercules ASIO Driver, once installed you can configure it in DJ ProMixer.

CONFIGURATION

Hercules DJ Console RMX has two different set up (for Internal or External Mode):

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Hercules DJ Console RMX as Audio Sound Card.

AUDIO SETTINGS

INTERNAL MODE (Master + Headphones)

DJ ProMixer ASIO Hercules DJ 4Set

DJ ProMixer Audio Connections Hercules DJ Console RMX 2

For Internal Mode choose your output: 1.-  ¼ TSR connectors (balanced)  or 2.- RCA (unbalanced).

Connect your headphones in front ( ¼ TSR stereo connector).

EXTERNAL MODE (Deck A + Deck B connected to external mixer)

DJ ProMixer ASIO Hercules DJ 4Set Multi Channel External Mixer

DJ ProMixer Audio Connections Hercules DJ Console RMX 1

 

For External Mode choose your outputs: Deck 1.- (1) ¼ TSR connectors (balanced)  or (2).- RCA (unbalanced) Deck 2.-  (3) ¼ TSR connectors (balanced)  or (4).- RCA (unbalanced)

Important: Hercules DJ Console RMX is designed to be used as internal mode (with internal Sound Card using master output  & headphones) or external mode (using the internal soundcard for each deck).

MIDI SET UP

DJ ProMixer MIDI Hercules DJ Console RMX

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (HERCULES DJ CONSOLE RMX MID0) and select on the right side HERCULES DJ CONSOLE RMX.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

DJ ProMixer Hercules DJ Console RMX map

Overview

Detail

DJ ProMixer Hercules DJ Console RMX map detail

1.-   PLAY
2.-   PAUSE
3.-   CUE
4.-   SYNC
5.-   PITCH
6.-   BEND (BUTTONS)
7.-   1/2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
8.-   X2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
9.-   MANUAL LOOP: IN
10.- MANUAL LOOP: OUT / EXIT / RELOOP
11.- FX 1: ECHO
12.- FX 2: FLANGER

13.- MOVE WITH ACTIVE FUNCTION (CUE/LOOP MEMORY  OR ACTIVE AUTO LOOP)
14.- BEND (WHEEL)
15.- SCRATCH
16.- SCRATCH (BUTTON)
17.- CHANGE FOCUS TREE / TRACKLIST
18.- OPEN PLAYLIST

19.- TRACKLIST MOVE UP
20.- TRACKLIST MOVE DOWN
21.- LOAD DECK
22.- KILL (EQ. TREBLE)
23.- KILL (EQ. MID)
24.- KILL (EQ. BASS)
25.- PFL
26.- ROTARY KNOBS OF THE MIXER (EQ HI, MID,BASS)
27.- GAIN

28.- DECK´S VOLUMEN A / B
29.- SAMPLER VOLUMEN
30.- CROSSFADER

info mapping                    info PDF

Hercules DJ Control Instinct S

HOW TO SET UP?

The system must recognize your Hercules DJ Control Instinct S as Audio and MIDI device before configuring in DJ ProMixer.

Hercules DJ Control Instinct S only requires download and install Hercules ASIO Driver, once installed you can configure it in DJ ProMixer.

 AUDIO SET UP

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Hercules DJ Control Instinct S as Audio Sound Card.

DJ ProMixer ASIO Hercules DJ 4Set

MIDI SET UP

DJ ProMixer MIDI Hercules DJ Control Instinct S

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (HERCULES DJ CONTROL INSTINCTS0) and select on the right side HERCULES DJ CONTROL INSTINCT S.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI  MAP

Overview

DJ ProMixer Hercules DJ Control Instinct S map

Detail

 DJ ProMixer Hercules DJ Control Instinct S map detail


1.-    PLAY / PAUSE
2.-    CUE
3.-    SYNC
4.-    MOVE WITH ACTIVE FUNCTION (CUE/LOOP MEMORY  OR ACTIVE AUTO LOOP)
5.-    PITCH
6.-    BEND (BUTTONS)
7.-    PAD MODE (NOTHING SELECTED) MEMORY CUE/LOOP: PAD 1 – CUE/LOOP 1, PAD 2 – CUE/LOOP 2, PAD 3 – CUE-LOOP 3, PAD 4 – CUE-LOOP 4
8.-    PAD MODE (LOOP SELECTED):
PAD 1 – 1/2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
PAD 2 – X2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
PAD 3 – MANUAL LOOP: IN
PAD 4 – MANUAL LOOP: OUT / EXIT / RELOOP

9.-   PAD MODE (FX SELECTED): PAD 1 – FX 1 (ECHO), PAD 2 – FX 2 (FLANGER), PAD 3 – FX 3 (WAH)
10.-  PAD MODE (SAMPLER SELECTED): PAD 1 – SAMPLE 1, PAD 2 – SAMPLE 2, PAD 3 – SAMPLE 3, PAD 4 – SAMPLE 4
11.-  BEND (WHEEL)
12.-  SCRATCH
13.-  PAD MODE SELECTOR: (7) NOTHING SELECTED: MEMORY CUE/LOOP – (8) LOOP (AUTO/MANUAL) – (9) FX – (10) SAMPLER MODE
14.-  VINYL MODE
15.-  FOLDER-TREE SELECTOR / OPEN CLOSE
16.-  TRACKLIST SELECTOR
17.- TRACKLIST MOVE UP
18.- TRACKLIST MOVE DOWN

19-   LOAD DECK
20-   PFL
21-   ROTARY KNOBS OF THE MIXER (EQ HI, MID,BASS) 
22.-  DECK´S VOLUMEN CONTROLS AND CROSSFADER

info mapping                    info PDF

Hercules DJ Control Air S

HOW TO SET UP?

The system must recognize your Hercules DJ Control Air S as Audio and MIDI device before configuring in DJ ProMixer.

Hercules DJ Control Air S only requires download and install Hercules ASIO Driver, once installed you can configure it in DJ ProMixer.

 AUDIO SET UP

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Hercules DJ Control Air S as Audio Sound Card.

DJ ProMixer ASIO Hercules DJ 4Set

MIDI SET UP

DJ ProMixer MIDI Hercules DJ Control Air S

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (DJ CONTROL AIRS0) and select on the right side HERCULES DJ CONTROL AIR S.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI  MAP

Overview

DJ ProMixer Hercules DJ Control Air S map

Detail

 DJ ProMixer Hercules DJ Control Air S map detail


1.-    PLAY / PAUSE
2.-    CUE
3.-    SYNC
4.-    MOVE WITH ACTIVE FUNCTION (CUE/LOOP MEMORY  OR ACTIVE AUTO LOOP)
5.-    PITCH
6.-    BEND (BUTTONS)
7.-    PAD MODE (NOTHING SELECTED) MEMORY CUE/LOOP: PAD 1 – CUE/LOOP 1, PAD 2 – CUE/LOOP 2, PAD 3 – CUE-LOOP 3, PAD 4 – CUE-LOOP 4
8.-    PAD MODE (LOOP SELECTED):
PAD 1 – 1/2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
PAD 2 – X2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
PAD 3 – MANUAL LOOP: IN
PAD 4 – MANUAL LOOP: OUT / EXIT / RELOOP

9.-   PAD MODE (FX SELECTED): PAD 1 – FX 1 (ECHO), PAD 2 – FX 2 (FLANGER), PAD 3 – FX 3 (WAH)
10.-  PAD MODE (SAMPLER SELECTED): PAD 1 – SAMPLE 1, PAD 2 – SAMPLE 2, PAD 3 – SAMPLE 3, PAD 4 – SAMPLE 4
11.-  PAD MODE SELECTOR: (8) LOOP (AUTO/MANUAL)
12.-  PAD MODE SELECTOR: (9) FX
13.-  PAD MODE SELECTOR: (10) SAMPLER MODE
14.-  BEND (WHEEL)
15.-  SRATCH

16.-  FOLDER-TREE SELECTOR / OPEN CLOSE
17.-  TRACKLIST SELECTOR
18.-  TRACKLIST MOVE UP
19.-  TRACKLIST MOVE DOWN
20-   LOAD DECK
21-   PFL
22.-  VINYL MODE
23.-  REC
24.-  AIR CONTROL (FX DRY/WET)
25-   ROTARY KNOBS OF THE MIXER (EQ HI, MID,BASS) 
26.-  DECK´S VOLUMEN CONTROLS AND CROSSFADER

IMPORTANT:
DJ ProMixer Hercules Air Control_1
Air Control enables FX Dry/Wet control (24) for booth Decks

info mapping                    info PDF

Hercules DJ Control Air

HOW TO SET UP?

The system must recognize your Hercules DJ Control Air as Audio and MIDI device before configuring in DJ ProMixer.

Hercules DJ Control Air only requires download and install Hercules ASIO Driver, once installed you can configure it in DJ ProMixer.

 AUDIO SET UP

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Hercules DJ Control Air as Audio Sound Card.

DJ ProMixer ASIO Hercules DJ 4Set

MIDI SET UP

DJ ProMixer MIDI Hercules DJ Control Air

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (DJ CONTROL AIR0) and select on the right side HERCULES DJ CONTROL AIR.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI  MAP

Overview

DJ ProMixer Hercules DJ Control Air map

Detail

 Hercules DJ Control Air map detail


1.-    PLAY / PAUSE
2.-    CUE
3.-    SYNC
4.-    MOVE WITH ACTIVE FUNCTION (CUE/LOOP MEMORY  OR ACTIVE AUTO LOOP)
5.-    PITCH
6.-    BEND (BUTTONS)
7.-    PAD MODE (NOTHING SELECTED) MEMORY CUE/LOOP: PAD 1 – CUE/LOOP 1, PAD 2 – CUE/LOOP 2, PAD 3 – CUE-LOOP 3, PAD 4 – CUE-LOOP 4
8.-    PAD MODE (LOOP SELECTED):
PAD 1 – 1/2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
PAD 2 – X2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
PAD 3 – MANUAL LOOP: IN
PAD 4 – MANUAL LOOP: OUT / EXIT / RELOOP

9.-   PAD MODE (FX SELECTED): PAD 1 – FX 1 (ECHO), PAD 2 – FX 2 (FLANGER), PAD 3 – FX 3 (WAH)
10.-  PAD MODE (SAMPLER SELECTED): PAD 1 – SAMPLE 1, PAD 2 – SAMPLE 2, PAD 3 – SAMPLE 3, PAD 4 – SAMPLE 4
11.-  PAD MODE SELECTOR: (8) LOOP (AUTO/MANUAL)
12.-  PAD MODE SELECTOR: (9) FX
13.-  PAD MODE SELECTOR: (10) SAMPLER MODE
14.-  BEND (WHEEL)
15.-  SRATCH

16.-  FOLDER-TREE SELECTOR / OPEN CLOSE
17.-  TRACKLIST SELECTOR
18.-  TRACKLIST MOVE UP
19.-  TRACKLIST MOVE DOWN
20-   LOAD DECK
21-   PFL
22.-  VINYL MODE
23.-  REC
24.-  AIR CONTROL (FX DRY/WET)
25-   ROTARY KNOBS OF THE MIXER (EQ HI, MID,BASS) 
26.-  DECK´S VOLUMEN CONTROLS AND CROSSFADER

IMPORTANT:
DJ ProMixer Hercules Air Control_1
Air Control enables FX Dry/Wet control (24) for booth Decks

info mapping                    info PDF

Hercules DJ Control Instinct

HOW TO SET UP?

The system must recognize your Hercules DJ Control Instinct as Audio and MIDI device before configuring in DJ ProMixer.

Hercules DJ Control Instinct only requires download and install Hercules ASIO Driver, once installed you can configure it in DJ ProMixer.

 AUDIO SET UP

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Hercules DJ Control Instinct as Audio Sound Card.

DJ ProMixer ASIO Hercules DJ 4Set

MIDI SET UP

DJ ProMixer MIDI Hercules DJ Control Instinct

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (HERCULES DJ CONTROL INSTINCT0) and select on the right side HERCULES DJ CONTROL INSTINCT.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI  MAP

Overview

DJ ProMixer Hercules DJ Control Instinct map

Detail

 DJ ProMixer Hercules DJ Control Instinct map detail


1.-    PLAY / PAUSE
2.-    CUE
3.-    SYNC
4.-    MOVE WITH ACTIVE FUNCTION (CUE/LOOP MEMORY  OR ACTIVE AUTO LOOP)
5.-    PITCH
6.-    BEND (BUTTONS)
7.-    PAD MODE (NOTHING SELECTED) MEMORY CUE/LOOP: PAD 1 – CUE/LOOP 1, PAD 2 – CUE/LOOP 2, PAD 3 – CUE-LOOP 3, PAD 4 – CUE-LOOP 4
8.-    PAD MODE (LOOP SELECTED):
PAD 1 – 1/2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
PAD 2 – X2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
PAD 3 – MANUAL LOOP: IN
PAD 4 – MANUAL LOOP: OUT / EXIT / RELOOP

9.-   PAD MODE (FX SELECTED): PAD 1 – FX 1 (ECHO), PAD 2 – FX 2 (FLANGER), PAD 3 – FX 3 (WAH)
10.-  PAD MODE (SAMPLER SELECTED): PAD 1 – SAMPLE 1, PAD 2 – SAMPLE 2, PAD 3 – SAMPLE 3, PAD 4 – SAMPLE 4
11.-  BEND (WHEEL)
12.-  SCRATCH
13.-  PAD MODE SELECTOR: (7) NOTHING SELECTED: MEMORY CUE/LOOP – (8) LOOP (AUTO/MANUAL) – (9) FX – (10) SAMPLER MODE
14.-  VINYL MODE
15.-  FOLDER-TREE SELECTOR / OPEN CLOSE
16.-  TRACKLIST SELECTOR
17.-  TRACKLIST MOVE UP
18.-  TRACKLIST MOVE DOWN

19-   LOAD DECK
20-   PFL
21-   ROTARY KNOBS OF THE MIXER (EQ HI, MID,BASS) 
22.-  DECK´S VOLUMEN CONTROLS AND CROSSFADER

info mapping                    info PDF

Hercules DJ Console RMX 2

HOW TO SET UP?

The system must recognize your Hercules DJ Console RMX 2 as Audio and MIDI device before configuring in DJ ProMixer.

Hercules DJ Console RMX 2 only requires download and install Hercules ASIO Driver, once installed you can configure it in DJ ProMixer.

CONFIGURATION

Hercules DJ Console RMX 2 has two different set up (for Internal or External Mode):

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Hercules DJ Console RMX 2 as Audio Sound Card.

AUDIO SETTINGS

INTERNAL MODE (Master + Headphones)

DJ ProMixer ASIO Hercules DJ Console RMX 2_1

DJ ProMixer Hercules DJ Console RMX 2 Audio Connections_1

For Internal Mode choose your output: 1.-  ¼ TSR connectors (balanced)  or 2.- (Booth) RCA (unbalanced).

Connect your headphones in front ( ¼ TSR stereo connector).

EXTERNAL MODE (Deck A + Deck B connected to external mixer)

DJ ProMixer ASIO Hercules DJ Console RMX 2_2

DJ ProMixer Hercules DJ Console RMX 2 Audio Connections_2

For External Mode choose your outputs: Deck 1.- (1) ¼ TSR connectors (balanced)  or (2).-(Booth) RCA (unbalanced) Deck 2.-  (3).- RCA (unbalanced)

Important: Hercules DJ Console RMX 2 is designed to be used as internal mode (with internal Sound Card using master output  & headphones) or external mode (using the internal soundcard for each deck).

MIDI SET UP

DJ ProMixer MIDI Hercules DJ Console RMX 2

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (DJ CONSOLE RMX20) and select on the right side HERCULES DJ CONSOLE DJ CONSOLE RMX 2.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

Overview

DJ ProMixer Hercules DJ Console RMX 2 map

Detail

DJ ProMixer Hercules DJ Console RMX 2 map detail

1.-   PLAY / PAUSE
2.-   CUE
3.-   SYNC
4.-   PITCH
5.-   BEND (BUTTONS)
6.-   MODE SELECTOR: (7) MEMORY CUE/LOOP – (8) SAMPLER – (9) FX – (10) LOOP (AUTO/MANUAL
7.-   MEMORY CUE/LOOP SELECTED: PAD 1 – CUE/LOOP 1, PAD 2 – CUE/LOOP 2, PAD 3 – CUE-LOOP 3, PAD 4 – CUE-LOOP 4
8.-   SAMPLER SELECTED: PAD 1 – SAMPLE 1, PAD 2 – SAMPLE 2, PAD 3 – SAMPLE 3, PAD 4 – SAMPLE 4
9.-   FX SELECTED: PAD 1 – FX 1 (ECHO), PAD 2 – FX 2 (FLANGER), PAD 3 – FX 3 (WAH)
10.- LOOP SELECTED:

PAD 1 – 1/2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
PAD 2 – X2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
PAD 3 – MANUAL LOOP: IN
PAD 4 – MANUAL LOOP: OUT / EXIT / RELOOP
11.- MOVE WITH ACTIVE FUNCTION (CUE/LOOP MEMORY  OR ACTIVE AUTO LOOP)
12.- FX DRY / WET
13.- BEND (WHEEL
14.- SCRATCH
15.- KILL (EQ. TREBLE)
16.- KILL (EQ. MID)
17.- KILL (EQ. BASS)
18.- FOLDER-TREE SELECTOR / OPEN CLOSE
19
.- TRACKLIST SELECTOR
20.- TRACKLIST MOVE UP
21.- TRACKLIST MOVE DOWN

22.- LOAD DECK
23.- PFL
24.- VINYL MODE
25-  ROTARY KNOBS OF THE MIXER (EQ HI, MID,BASS), GAIN
26.- DECK´S VOLUMEN CONTROLS AND CROSSFADE

info mapping                    info PDF

Hercules DJ Console 4Mx

HOW TO SET UP?

The system must recognize your Hercules DJ Console 4 Mx as Audio and MIDI device before configuring in DJ ProMixer.

Hercules DJ Console 4 Mx only requires download and install Hercules ASIO Driver, once installed you can configure it in DJ ProMixer.

CONFIGURATION

Hercules DJ Console 4 Mx has two different set up (for Internal or External Mode):

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Hercules DJ Console 4 Mx as Audio Sound Card.

AUDIO SETTINGS

INTERNAL MODE (Master + Headphones)

DJ ProMixer ASIO Hercules DJ 4Set

 DJ ProMixer Hercules DJ Console 4 Mx Audio Connections 1

For Internal Mode choose your output: 1.-  ¼ TSR connectors (balanced)  or 2.- RCA (unbalanced).

Connect your headphones in front ( ¼ TSR stereo connector).

EXTERNAL MODE (Deck A + Deck B connected to external mixer)

DJ ProMixer ASIO Hercules DJ 4Set Multi Channel External Mixer

DJ ProMixer Hercules DJ Console 4 Mx Audio Connections 2

For External Mode choose your outputs: Deck 1.- (1) ¼ TSR connectors (balanced)  or (2).- RCA (unbalanced) Deck 2.-  (3) ¼ TSR connectors (balanced)  or (4).- RCA (unbalanced)

Important: Hercules DJ Console 4 Mx is designed to be used as internal mode (with internal Sound Card using master output  & headphones) or external mode (using the internal soundcard for each deck).

MIDI SET UP

DJ Promixer MIDI Hercules DJ Console 4 Mx

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (HERCULES DJ CONSOLE 4 MX MID0) and select on the right side HERCULES DJ CONSOLE 4 MX.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

Overview

DJ ProMixer Hercules DJ Console 4 Mx map

Detail

DJ ProMixer Hercules DJ Console 4 Mx map detail

 

1.-   PLAY / PAUSE
2.-   CUE
3.-   SYNC
4.-   PITCH
5.-   BEND (BUTTONS)
6.-   SHIFT SELECTOR
7.-   1/2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
7.-   (SHIFT ENABLED) MEMORY CUE / LOOP 1
8.-   X2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
8.-   (SHIFT ENABLED) MEMORY CUE / LOOP 2
9.-   MANUAL LOOP: IN
9.-   (SHIFT ENABLED) MEMORY CUE / LOOP 3
10.- MANUAL LOOP: OUT / EXIT / RELOOP
10.- (SHIFT ENABLED) MEMORY CUE / LOOP 4
11.- FX 1: ECHO
11.- (SHIFT ENABLED) SAMPLE 1
12.- FX 2: FLANGER
12.- (SHIFT ENABLED) SAMPLE 2
13.- MOVE WITH ACTIVE FUNCTION (CUE/LOOP MEMORY  OR ACTIVE AUTO LOOP)
14.- FX DRY / WET
15.- KEYLOCK
16.- CHANGE TEMPO RANGE (4%, 8%, 10%, 12%, 16%, 32%)
17.- BEND (WHEEL)
18.- SCRATCH
19.- FOLDER-TREE SELECTOR / OPEN CLOSE
20.- TRACKLIST SELECTOR
21.- TRACKLIST MOVE UP
22.- TRACKLIST MOVE DOWN

23.- LOAD DECK
24.- PFL
25.- KILL (EQ. TREBLE)
26.- KILL (EQ. MID)
27.- KILL (EQ. BASS)
28.- VINYL MODE
29-   ROTARY KNOBS OF THE MIXER (EQ HI, MID,BASS), GAIN
30.-  DECK´S VOLUMEN CONTROLS AND CROSSFADER

info mapping                    info PDF

Hercules DJ 4Set

HOW TO SET UP?

The system must recognize your Hercules DJ 4 Set as Audio and MIDI device before configuring in DJ ProMixer.

Hercules DJ 4 Set only requires download and install Hercules ASIO Driver, once installed you can configure it in DJ ProMixer.

 AUDIO SET UP

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Hercules DJ 4 Set as Audio Sound Card.

DJ ProMixer ASIO Hercules DJ 4Set

MIDI SET UP

DJ ProMixer MIDI Hercules DJ 4Set

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (HERCULES DJ 4 SET MID0) and select on the right side HERCULES DJ 4 SET.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI  MAP

Overview

DJ ProMixer Hercules DJ 4Set map

Detail

 DJ ProMixer Hercules DJ 4Set map detail


1.-    PLAY / PAUSE
2.-    CUE
3.-    SYNC
4.-    MOVE WITH ACTIVE FUNCTION (CUE/LOOP MEMORY  OR ACTIVE AUTO LOOP)
5.-    PITCH
6.-    BEND (BUTTONS)
7.-    1/2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
8.-    X2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
9.-    (SHIFT) ENABLE / DISABLE FX DIRECT BUTTONS
10.-  NOTHING SELECTED: MANUAL LOOP IN / OUT-EXIT-RELOOP
11.-  (SHIFT ENABLED) FX DIRECT BUTTONS (FX 1: ECHO, FX2 : FLANGER, FX3 : WAH)
12.-  BEND (WHEEL)
13.-  SCRATCH
14.-  PFL
15.-  FOLDER-TREE SELECTOR / OPEN CLOSE
16.-  TRACKLIST SELECTOR
17.- TRACKLIST MOVE UP
18.- TRACKLIST MOVE DOWN

19-   LOAD DECK
20-   VINYL MODE
21-   REC
22-   ROTARY KNOBS OF THE MIXER (EQ HI, MID,BASS) 
23.-  DECK´S VOLUMEN CONTROLS AND CROSSFADER

info mapping                    info PDF

Akiyama TTWO

HOW TO SET UP?

The system must recognize your Akiyama TTWO as Audio and MIDI device before configuring in DJ ProMixer.

Akiyama TTWO only requires download and install TTWO Akiyama ASIO Driver, once installed you can configure it in DJ ProMixer.

 AUDIO SET UP

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Akiyama TTWO as Audio Sound Card.

DJ ProMixer ASIO Akiyama TTWO

 

DJ ProMixer Akiyama TTWO Audio Connections

For Internal Mode choose your output: 1.- for 1/4 TRS connectors (balanced)  or 2.- for RCA (unbalanced) (1+2).

MIDI SET UP

DJ ProMixer MIDI Akiyama TTWO

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (AKIYAMA TTWO0) and select on the right side AKIYAMA TTWO.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI  MAP

Overview

DJ ProMixer Akiyama TTWO map

Detail

 DJ ProMixer Akiyama TTWO map detail


1.-    PLAY / PAUSE
2.-    CUE
3.-    SYNC
4.-    VINYL MODE
5.-    PITCH
6.-    BEND (BUTTONS)
7.-    FX DRY / WET
8.-    FX PARAMETER
9.-    FX ECHO SYNC (FROM 2/1 TO 1/8 BEATS)
10.-  SAMPLER DIRECT BUTTONS SELECTOR
11.-  NOTHING SELECTED: MEMORY CUE / LOOP DIRECT BUTTONS (1, 2, 3, 4)
12.-  SAMPLER SELECTOR ENABLED: SAMPLER DIRECT BUTTONS (1, 2, 3, 4)
13.-  (SHIFT +) FX DIRECT BUTTONS (FX 1: ECHO, FX2 : FLANGER, FX3 : WAH)
14.-  MANUAL LOOP: IN / OUT-EXIT-RELOOP
15.-  1/2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
16.-  X2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
17.-  PFL
18.-  BEND (WHEEL)
19-  SCRATCH
20-  SHIFT
21-  LOAD DECK
22-  SCROLL: TRACKLIST
23.- (SHIFT +) SCROLL: TREE
24.- ROTARY KNOBS OF THE MIXER (EQ HI, MID,BASS +PUSH KILL), GAIN
25.- DECK´S VOLUMEN CONTROLS AND CROSSFADER

info mapping                    info PDF

Akiyama Quattro

HOW TO SET UP?

The system must recognize your Akiyama Quattro as Audio and MIDI device before configuring in DJ ProMixer.

Akiyama Quattro only requires download and install Akiyama Quattro ASIO Driver, once installed you can configure it in DJ ProMixer.

 AUDIO SET UP

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Akiyama Quattro as Audio Sound Card.

DJ ProMixer ASIO Akiyama Quattro

DJ ProMixer Akiyama Quattro Audio Connections_1

For Internal Mode choose your output: 1.- for XLR connectors (balanced)  or 2.- for RCA (unbalanced) (1+2).

MIDI SET UP

DJ ProMixer MIDI Akiyama Quattro

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (AKIYAMA QUATRO0) and select on the right side AKIYAMA QUATTRO.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI  MAP

Overview

DJ ProMixer Akiyama Quattro map

Detail

DJ ProMixer Akiyama Quattro map detail


1.-    PLAY / PAUSE
2.-    CUE
3.-    SYNC
4.-    KEYLOCK
5.-    VINYL MODE
6.-    PITCH
7.-    BEND (BUTTONS)
8.-    FX DRY / WET
9.-    FX PARAMETER
10.-  FX ECHO SYNC (FROM 2/1 TO 1/8 BEATS)
11.-  FX DIRECT BUTTONS (FX 1: ECHO, FX2 : FLANGER, FX3 : WAH)
12.-  (SHIFT +) SAMPLER DIRECT BUTTONS (1, 2, 3, 4)
13.-  MEMORY CUE / LOOP DIRECT BUTTONS (1, 2, 3, 4)
14.-  MANUAL LOOP: IN / OUT-EXIT-RELOOP
15.-  1/2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
16.-  X2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
17.-  PFL
18.-  BEND (WHEEL)
19-  SCRATCH
20-  SHIFT
21-  OPEN / CLOSE FOLDER
22-  SCROLL: TRACKLIST
23.- (SHIFT +) SCROLL: TREE
24.- LOAD DECK
25.- ROTARY KNOBS OF THE MIXER (EQ HI, MID,BASS +PUSH KILL), GAIN
26.- DECK´S VOLUMEN CONTROLS AND CROSSFADER

info mapping                    info PDF

Akiyama Quark / SC

HOW TO SET UP?

The system must recognize your Akiyama Quark as Audio Device (only Quark SC) and MIDI Device (for booth models) before configuring in DJ ProMixer.

CONFIGURATION

Akiyama Quark SC has two different audio set up (for Internal or External Mode):

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Akiyama Quark SC as Audio Sound Card.

AUDIO SETTINGS

INTERNAL MODE (Master + Headphones)

DJ ProMixer Audio Internal Akiyama Quark SC

 DJ ProMixer Akiyama Quark Audio Connections Internal

For Internal Mode connect your output in (1) RCA  connectors (L+R) for Master Output.

Connect your headphones in front ( ¼ TSR stereo connector).

EXTERNAL MODE (Deck A + Deck B connected to external mixer)

DJ ProMixer Audio External Akiyama Quark SC

DJ ProMixer Akiyama Quark Audio Connections External

For External Mode connect your outputs 1.- RCA  connectors (L+R) for Deck A, and  2.- RCA connectors (L+R) for Deck B.

Important: Akiyama Quark SC is designed to be used as internal mode (with internal Sound Card using master output  & headphones) or external mode (using the internal soundcard for each deck).

Akiyama Quark have not soundcard, it´s only MIDI Controller.

MIDI SET UP

DJ ProMixer MIDI Akiyama Quark SC

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (Quark0 / Quark SC0) and select on the right side AKIYAMA QUARK SC.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

Overview

DJ ProMixer Akiyama Quark map

(Click to enlarge)

Detail

DJ ProMixer Akiyama Quark map detail

1.-   PLAY / PAUSE
2.-   CUE
3.-   SYNC
4.-   MANUAL LOOP: IN / OUT / EXIT-RELOOP
5.-   AUTO LOOP FROM ¼ TO 32 BEATS (IN – STARTS 4 BEATS, EXIT, RELOOP)
6.-   MEMORIZE CUE / LOOP
7.-   FX DRY / WET
8.-   FX PARAMETER
9.-   FX ECHO SYNC (FROM 2/1 TO 1/8 BEATS)
10.- FX 1: ECHO
11.- FX 2: FLANGER
12.- FX 3: WAH
13.- VINYL MODE
14.- PITCH
15.- BEND (BUTTONS)
16.- MULTISELECTOR: NOTHING SELECTED (LIGHT OFF): MEMORY CUE / LOOP DIRECT BUTTONS (1, 2, 3, 4, 5, 6)
17.- MULTISELECTOR: 1 PUSH (ORANGE LIGHT) SAMPLER DIRECT BUTTONS (1, 2, 3, 4, 5, 6)
18.- MULTISELECTOR: SECOND PUSH (GREEN LIGHT) AUTO LOOP DIRECT BUTTONS (1/4, 1/2, 1, 2, 4, 8 BEATS)
19.- BEND (WHEEL)
20.- SCRATCH
21.- LOAD DECKS
22.- PFL
23.- CHANGE FOCUS TREE / TRACKLIST
24.- TRACKLIST SCROLL
25.- ROTARY KNOBS OF THE MIXER (EQ HI, MID,BASS +PUSH KILL), GAIN
26.- DECK´S VOLUMEN CONTROLS AND CROSSFADER

info mapping                    info PDF

Pioneer DDJ-SP 1 (MIDI – FX Module)

HOW TO SET UP?

The system must recognize your Pioneer DDJ-SP1 as MIDI device before configuring in DJ ProMixer.

IMPORTANT: Pioneer DDJ-SP1 is a MIDI Device have not integrated FX Processor or audio device/s. For audio configuration choose your work mode and audio sound card/s).

MIDI CONFIGURATION

 Whit 1 / 2 CDJ (HID) connected

1.- Connect normally your CDJ as HID device/s: HOW TO SET UP CDJs WITH HID?
2.- Connect your Pioneer DDJ-SP1 as MIDI device

DJ ProMixer MIDI Pioneer DDJ-SP1

Select in MIDI PORT / MIDI MAP 1 on the left side  (Pioneer DDJ-SP10) and select on the right side PIONEER DDJ-SP1.XML. Nothing selected in MIDI PORT / MIDI MAP 2. Nothing selected in MIDI PORT / MIDI MAP 2

Whit other MIDI device

1.- Pioneer DDJ-SP1 Accept only one more MIDI device.
2.- MIDI Single mode (2 devices) + Pioneer DDJ-SP1: Not supported

DJ ProMixer MIDI Pioneer DDJ-SP1_3

 

Select in MIDI PORT / MIDI MAP 1 Your compatible MIDI device .Select in MIDI PORT / MIDI MAP 2 on the left side  (Pioneer DDJ-SP1 0/I*) and select on the right side PIONEER DDJ-SP1.XML.
* (0/I)  It depends what is the first device recognized by the System.

MIDI MAP
(Overview)

DJ ProMixer Pioneer DDJ-SP1 map

Detail

DJ ProMixer Pioneer DDJ-SP1 map detail

  1.- FX DRY / WET
  2.- FX PARAMETER
  3.- FX ECHO SYNC (FROM 2/1 TO 1/8 BEATS)
  4.- FX 1 (ECHO)
  5.- FX 2 (FLANGER)
  6.- FX 3 (WAH)
  7.- SYNC
  8.- BRAKE
  9.- REVERSE
10.- MEMORY CUE / LOOP
11.- DEL CUE / LOOP

12.- SCROLL: AUTO LOOP (IN – STARTS 4 BEATS, EXIT, RELOOP) / PUSH: EXIT LOOP / RELOOP
13.- TRACKLIST SCROLL
14.- CHANGE FOCUS TREE / TRACKLIST
15.- CHANGE FOCUS PLAYLIST / GROUPS-SUBGROUPS / EXPLORER

16.- LOAD DECK
17.- SAMPLER VOLUMEN
18.- MEMORY CUE / LOOP SELECTOR (HOT CUE SELECTOR)
19.- AUTOLOOP (FROM 1/4 TO 32 BEATS) (ROLL SELECTOR)
20.- SAMPLER (SAMPLER SELECTOR) 

info mapping                    info PDF

Akai AFX

HOW TO SET UP?

The system must recognize your Akai AFX device before configuring in DJ ProMixer.
IMPORTANT: Akai AFX is a MIDI Device (It has not integrated audio device/s) For audio configuration choose your work mode and audio sound card/s).

Akai AFX has two different MIDI map:
1.- Controller Mode (Mode 1)
2.- FX Module (Mode 2)

MIDI CONFIGURATION

1.- Controller Mode (Mode 1)

 DJ ProMixer MIDI Akai AFX_1

Main controls as Controller – secundary controls as FX Module

Select in MIDI PORT / MIDI MAP 1 on the left side one device (Akai Pro AFX 0) and select on the right side AKAI AFXMODE1.XML. Nothing selected in MIDI PORT / MIDI MAP 2.

2.- FX Module (Mode 2)

DJ ProMixer MIDI Akai AFX_2

Main controls as FX Module – secundary controls as Controller

Select in MIDI PORT / MIDI MAP 1 on the left side one device (Akai Pro AFX 0) and select on the right side AKAI AFXMODE2.XML. Nothing selected in MIDI PORT / MIDI MAP 2.

HOW TO SET UP Akai AMX with Akai AFX?

DJ ProMixer Akai AMX AFX

Important: Akai AFX Mode 2 (FX Module) is recommended to use with Akai AMX, but it can be used also with Akai AFX Mode 1 (Controller)

DJ ProMixer MIDI Akai AFX and AMX

Select in MIDI PORT / MIDI MAP 1 on the left side one device (AMX MID 0/I*) and select on the right side AKAI AMX.XML. Select in MIDI PORT / MIDI MAP 2 on the left side the other device (Akai Pro AFX 0/I*) and select on the right side AKAI AFXMODE2.XML

* (0 / I)  It depends what is the first device recognized by the System

Select your AMX Device in Audio Set Up as Audio Device:
How to set up Akai ASIO AMX?

TWO MIDI MAPS

DJ ProMixer Akai AFX map

1.-   FX 1: ECHO 
2.-   FX 2: FLANGER

3.-   FX 3: WAH

4.-   PFL

5.-   REVERSE 

6.-   BRAKE
7.-   CHANGE FOCUS TREE / TRACKLIST

8.-   SCROLL / LOAD / ENTER
9.-   DECK SELECTOR (DECK A / DECK B)
10.- TACTILE SENSOR (SEARCH, PITCH, SCRATCH) 
11.- SEARCH MODE (TACTILE SENSOR)
12.- PITCH MODE (TACTILE SENSOR)
13.- SCRATCH MODE (TACTILE SENSOR)
14.- CHANGE FOCUS PLAYLIST / GROUPS-SUBGROUPS / EXPLORER

MIDI MAP MODE 1 (CONTROLLER)
15.- EQ. HIGH – (SHIFT +) FX DRY / WET
16.- EQ. MID – (SHIFT +) FX PARAMETER
17.- EQ. BASS – (SHIFT +) FX ECHO BEAT SYNC (FROM 2/1 TO 1/8 BEATS)
18.- DECK VOLUMEN – (SHIFT +) SAMPLER VOLUMEN

MIDI MAP MODE 2 (FX MODULE)
15.- FX DRY / WET – (SHIFT +) EQ. HIGH
16.- FX PARAMETER – (SHIFT +) EQ. MID
17.- FX ECHO BEAT SYNC (FROM 2/1 TO 1/8 BEATS) – (SHIFT +) EQ. BASS
18.- SAMPLER VOLUMEN – (SHIFT +) DECK VOLUMEN

PAD MODE DETAIL 

19.- CUE / LOOP MEMORY (1, 2, 3, 4, 5, 6), MEMORIZE, DELETE

DJ ProMixer Akai AFX PAD Detail map CUE
20.- AUTOLOOP FROM ¼ TO 32 BEATS

DJ ProMixer Akai AFX PAD Detail map AUTOLOOP
21.- MANUAL LOOP (IN – OUT – EXIT / RELOOP), PLAY/PAUSE, CUE, SYNC

DJ ProMixer Akai AFX PAD Detail map MANUAL LOOP
22.- SAMPLER (SAMPLES 1, 2, 3, 4, 5, 6) STOP
 

DJ ProMixer Akai AFX PAD Detail map SAMPLER

info mapping                    info PDF

Akai AMX

HOW TO SET UP?

The system must recognize your Akai AMX as Audio and MIDI Device before configuring in DJ ProMixer.
Akai AMX only requires download and install Akai AMX ASIO Driver.

Driver Akai AMXOpen DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Akai AMX as Audio Sound Card.

AUDIO SETTINGS

DJ ProMixer ASIO Akai AMX 

MIDI CONFIGURATION

 DJ ProMixer MIDI Akai AMX

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (AMX MID) and select on the right side AKAI AMX.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

HOW TO SET UP Akai AMX with Akai AFX?

MIDI MAP

DJ ProMixer Akai AMX map

1.-   PLAY / PAUSE
2.-   CUE
3.-   SYNC
4.-   CHANGE FOCUS TREE / TRACKLIST
5.-   TRACKLIST SCROLL / PUSH
6.-   CHANGE FOCUS PLAYLIST / GROUPS-SUBGROUPS / EXPLORER
7.-   LOAD DECK
8.-   (SHIFT +) FX 1 (ECHO)
9.-   GAIN
10.- (SHIFT +) PITCH
11.- EQ. TREBLE
12.- EQ. MID
13.- EQ. BASS
14.- FX PARAMETER
15.- HEADPHONES VOLUMEN
16.- PFL
17.- SHIFT
18.- DECK´S VOLUMEN CONTROLS AND CROSSFADER

info mapping                    info PDF

Numark Mixtrack Edge

HOW TO SET UP? The system must recognize your Numark Mixtrack Edge as Audio and MIDI Device before configuring in DJ ProMixer.

AUDIO SETTINGS

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Numark Mixtrack Edge as Audio Sound Card. Note: You do not need install additionals audio drivers, once connected is just plug and play. DJ ProMixer Audio Mixtrack Edge Connect your output  (1/8 TSR stereo connector) in Master Output. Connect your headphones in  1/8 TSR headphones stereo connector.

MIDI SET UP

DJ ProMixer MIDI Mixtrack Edge In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (MixTrack Edge) and select on the right side NUMARK MIXTRACK EDGE.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

Overview DJ ProMixer Mixtrack-Edge map (Click to enlarge)

Detail

DJ ProMixer Mixtrack-Edge map_detail 1.-    PLAY / PAUSE
2.-    CUE
3.-    SYNC
4.-    (SHIFT +) KEYLOCK
5.-    SHIFT SELECTOR
6.-    FX SELECTOR
7.-    CUE / LOOP MEMORY
8.-    SAMPLES (1,2,3)
9.-    (FX SELECTOR +) FX 1, FX 2, FX 3
10.-  MANUAL LOOP (LOOP IN / OUT / EXIT-RELOOP)
11.-  (SHIFT +) AUTO LOOP (IN 4 BEATS): 1/2 , X2, EXIT-RELOOP
12.-  CHANGE FOCUS TREE / TRACKLIST
13.-  ENTER / PUSH
14.-  HEADPHONES VOLUMEN (A AND B)
15.-  EQ. TREBLE
16.-  EQ. BASS
17.-  (FX SELECTOR) FX DRY / WET
18.-  (FX SELECTOR) FX PARAMETER
19.-  WHEEL: BEND
20.-  WHEEL: SCRATCH / (FX SELECTOR) SCRATCH
21.-  WHEEL: MOVE UP / DOWN PITCH
22.-  WHEEL: SEARCH MODE
23.-  PFL
24.-  LOAD DECK
25.-  WHEEL
26.-  DECK´S VOLUMEN CONTROLS AND CROSSFADER

info mapping                    info PDF

Numark NDX 500

HOW TO SET UP?

The system must recognize your Numark NDX-500 device/s before configuring in DJ ProMixer.
IMPORTANT: Numark NDX-500 is a MIDI and audio sound card device

MIDI CONFIGURATION

Single Mode (2 Numark NDX-500 Connected)

DJ ProMixer Single Numark NDX 500

Select in MIDI PORT / MIDI MAP 1 on the left side one device (Numark NDX500 0) and select on the right side NUMARK NDX-500(SINGLE A).XML. Select in MIDI PORT / MIDI MAP 2 on the left side the other device (Numark NDX500 I) and select on the right side NUMARK NDX-500(SINGLE B).XML

Dual Mode

DJ ProMixer Dual Numark NDX 500

Select in MIDI PORT / MIDI MAP 1 on the left side Numark NDX500 0, and select on the right side NUMARK NDX-500 (A AND B).XML. Nothing selected in MIDI PORT / MIDI MAP 2 How to change the decks? Two ways: 1.- Hardware: Use the “Single Button”. 2.- Software: By clicking the headphone button of the deck.

AUDIO CONFIGURATION

Open DJ ProMixer and go to “Config”, open “Audio Setup”, here you can select your Numark NDX-500 as Audio Sound Card.

DJ ProMixer Audio Numark NDX 500

MIDI MAP

DJ ProMixer Numark NDX 500 Map

1.-   PLAY / PAUSE
2.-   CUE
 
3.-   SYNC
 
4.-   SCROLL / LOAD / ENTER
5.-   CHANGE FOCUS TREE / TRACKLIST
6.-   MANUAL LOOP (IN – OUT – EXIT / RELOOP)
7.-   CUE / LOOP MEMORY (1, 2, 3) 

8.-   MEMORIZE CUE / LOOP
9.-   BRAKE
10.- REVERSE
11.- SCRATCH MODE (WHEEL)
12.- SEARCH MODE (WHEEL)
13.- DECK SELECTOR (DECK A / DECK B) (ONLY DUAL MODE)
14.- CHANGE FOCUS PLAYLIST / GROUPS-SUBGROUPS / EXPLORER 
15.- PITCH

16.- PITCH BEND
17.- PITCH
18.- BEND (BUTTONS)
19.- BEND (WHEEL)
20.- WHEEL
21.- LINK TO PC (SOURCE)

info mapping                    info PDF

Synq DMC-2000

HOW TO SET UP?

The system must recognize your Synq DMC-2000 as Audio and MIDI device before configuring in DJ ProMixer.

AUDIO AND MIDI SETTINGS

——————————————————————————————————————– IMPORTANT: Install the drivers provided for the manufacturer and check this configuration to install your device
——————————————————————————————————————–

MIDI MAP
Overview

DJ ProMixer Synq DMC-2000_map

Detail

DJ ProMixer Synq DMC-2000_map_detail_1

1.-     PLAY / PAUSE
2.-     CUE
3.-     AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS) IN  EXIT / RELOOP IN
4.-    TRACK SCROLL / PUSH (LOAD)
5.-    FOLDER SCROLL / PUSH (OPEN-CLOSE)
6.-    CUE LOOP MEMORY (1 TO 4) (NORMAL MODE) / SAMPLES (1 TO 4) (SAMPLE BUTTON ACTIVATED)
7.-    MEMORIZE CUE / LOOP POINT
8.-    DELETE CUE /LOOP POINT
9.-    ENABLE SAMPLER (HOLD BUTTON) (SAMPLES 1,2,3,4)
10.-  FX ECHO
11.-  FX FLANGER
12.-  FX WAH
13.-  REVERSE
14.-  BRAKE
15.-  WHEEL MODE: FX PARAMETER
16.-  WHEEL MODE: VINYL
17.-  WHEEL MODE: SEARCH
18.-  PFL
19-  CHANGE TEMPO RANGE (4%, 8%, 10%, 12%, 16%, 32%)
20-  KEYLOCK
21-  MOVE WITH ACTIVE FUNCTION (CUE/LOOP MEMORY  OR ACTIVE AUTO LOOP)
22-  PITCH
23.- BEND (BUTTONS)
24.- BEND (WHEEL)
25.- SCRATCH
26.- SYNC
27.- ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS)
28.- DECK´S VOLUMEN CONTROLS AND CROSSFADER

info mapping                    info PDF

Behringer BCD-2000

HOW TO SET UP?

The system must recognize your Behringer BCD-2000 as Audio and MIDI device before configuring in DJ ProMixer.

Behringer BCD-2000  only requires download and install Behringer ASIO Driver, once installed you can configure it in DJ ProMixer.

 AUDIO SET UP

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Behringer BCD-2000 as Audio Sound Card.

AUDIO SETTINGS

INTERNAL MODE (Master + Headphones)

 

DJ ProMixer ASIO Behringer BCD-2000

MIDI SET UP

 DJ ProMixer MIDI Behringer BCD-2000

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (BCD30000) and select on the right side BEHRINGER BCD-2000.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI  MAP

Overview

 DJ ProMixer Behringer BCD-2000 Map

Detail

DJ ProMixer Behringer BCD-2000 Map Detail

1.-   PLAY / PAUSE
2.-   CUE
3.-   AUTOLOOP (4 BEATS) IN / EXIT
4.-   RELOOP
5.-   SYNC
6.-   SRATCH (WHEEL)
7.-   LOAD TRACK
8.-   BEND (DECK PLAYING) / TRACK SELECTOR (DECK STOPPED)
9.-   PITCH
10.- SELECTOR MEMORY CUE / LOOP
11.- DECK VOLUMEN
12.- EQUALIZER ROTARY KNOBS (GAIN, HI, MID,BASS)
13.- KILL
14.- PFL SELECTOR
15.- FX ECHO
16.- FX FLANGER
17.- FX DRY / WET
18.- FX PARAMETER
19-  WHEEL
20-  CROSSFADER

info mapping                    info PDF

Behringer BCD-3000

HOW TO SET UP?

The system must recognize your Behringer BCD-3000 as Audio and MIDI device before configuring in DJ ProMixer.

Behringer BCD-3000  only requires download and install Behringer ASIO Driver, once installed you can configure it in DJ ProMixer.

 AUDIO SET UP

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Behringer BCD-3000 as Audio Sound Card.

AUDIO SETTINGS

INTERNAL MODE (Master + Headphones)

DJ ProMixer ASIO Behringer BCD-3000_

 

MIDI SET UP

 DJ ProMixer MIDI Behringer BCD-3000

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (BCD30000) and select on the right side BEHRINGER BCD-3000.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI  MAP

Overview

 DJ ProMixer BehringerBCD3000 Map

Detail

DJ ProMixer BehringerBCD3000_Map Detail


1.-   PLAY / PAUSE
2.-   CUE
3.-   AUTOLOOP (4 BEATS) IN / EXIT
4.-   RELOOP
5.-   SYNC
6.-   SRATCH (WHEEL)
7.-   LOAD TRACK
8.-   BEND (DECK PLAYING) / TRACK SELECTOR (DECK STOPPED)
9.-   PITCH
10.- SELECTOR MEMORY CUE / LOOP
11.- DECK VOLUMEN
12.- EQUALIZER ROTARY KNOBS (GAIN, HI, MID,BASS)
13.- KILL
14.- PFL SELECTOR
15.- FX ECHO
16.- FX FLANGER
17.- FX DRY / WET
18.- FX PARAMETER
19-  WHEEL
20-  CROSSFADER

info mapping                    info PDF

ION Discover DJ

HOW TO SET UP?

The system must recognize your ION Discover DJ before configuring in DJ ProMixer.

IMPORTANT: ION Discover DJ is a MIDI Device (It has not integrated audio device/s) For audio configuration choose your work mode and audio sound card/s).

 MIDI SET UP

DJ ProMixer Ion Discover DJ MIDI

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (Ion Discover DJ Mid0) and select on the right side ION DISCOVER DJ.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP
Overview

 DJ ProMixer Ion Discover DJ map

Detail

DJ ProMixer Ion Discover DJ map detail

1.-   PLAY / PAUSE
2.-   CUE
3.-   REVERSE
4.-   SYNC
5.-   DECK VOLUMEN
6.-   BASS / TREBLE
7.-   PITCH BEND
8.-   SCROLL
9.-   LOAD
10.- CROSSFADER
11.-  BEND (WHEEL)

info mapping                    info PDF

ION iCUE

HOW TO SET UP?

The system must recognize your ION ICUE before configuring in DJ ProMixer.

IMPORTANT: ION ICUE is a MIDI Device (It has not integrated audio device/s) For audio configuration choose your work mode and audio sound card/s).

 MIDI SET UP

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (Ion ICUE Mid0) and select on the right side ION ICUE.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI Ion ICUE

MIDI MAP
Overview

DJ ProMixer ION ICUEl MIDI map

Detail

DJ ProMixer ION ICUEl MIDI map detail

1.-   PLAY
2.-   PAUSE
3.-   CUE
4.-   PITCH
5.-   SYNC
6.-   KEYLOCK
7.-   SCRATCH
8.-   PFL VOLUMEN (A AND B)
9.-   ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS)
10.- VOLUMEN CONTROLS AND CROSSFADER
11.- VOLUMEN CONTROLS AND CROSSFADER
12.- WHEELS

info mapping                    info PDF

Numark Total Control

HOW TO SET UP?

The system must recognize your Numark Total Control before configuring in DJ ProMixer.
IMPORTANT: Numark Total Control is a MIDI Device (have not integrated audio device/s) For audio configuration choose your work mode and audio sound card/s).

MIDI CONFIGURATION

DJ ProMixer Numark Total Control MIDI

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (Numark TOTAL CONTROL MIDI0) and select on the right side NUMARK TOTAL CONTROL.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

TWO MIDI MAPS

Overview

Numark Total Control MIDI map

Detail

DJ ProMixer Numark Total Control MIDI map detail

1.-   PLAY
2.-   PAUSE
3.-   CUE
4.-   PITCH
5.-   SYNC
6.-   KEYLOCK
7.-   PFL
8.-   MANUAL LOOP (1.- IN  2.- OUT / EXIT / RELOOP)
9.-   PITCH BEND
10.- CHANGE FOCUS TREE / TRACKLIST
11.- SCROLL / LOAD / ENTER
12.- LOAD TRACK
13.- FX DRY / WET
14.- FX PARAMETER
15.- MID MAP 1 AND MIDI MAP 2 – FX – ECHO
16.- MIDI MAP 1 – SCRATCH / MIDI MAP 2 – FX – FLANGER
17.- MIDI MAP 1  FX FLANGER / MIDI MAP 2 – SAMPLER 1
18.- MIDI MAP 1 FX WAH / MIDI MAP 2 – SAMPLER 2
19.- FX ECHO BEAT SYNC
20.- SAMPLER VOLUMEN
21.- PFL VOLUMEN (A AND B)
22.- ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS) / KILL = PUSH (HI, MID, BASS)
23.- VOLUMEN CONTROLS AND CROSSFADER
24.- WHEELS

info mapping                    info PDF

Numark Stealth Control

HOW TO SET UP?

The system must recognize your Numark Stealth Control before configuring in DJ ProMixer.
IMPORTANT: Numark Stealth Control is a MIDI Device (It has not integrated audio device/s) For audio configuration choose your work mode and audio sound card/s).

MIDI CONFIGURATION

DJ ProMixer Numark Stealth Control MIDI

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (Numark OMNI CONTROL MIDI0) and select on the right side NUMARK OMNI CONTROL.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

TWO MIDI MAPS

Overview

DJ ProMixer Numark Stealth Control MIDI map

Detail

Numark Stealth Control MIDI map detail

1.-   PLAY
2.-   PAUSE
3.-   CUE
4.-   PITCH
5.-   SYNC
6.-   KEYLOCK
7.-   PFL
8.-   MANUAL LOOP (1.- IN  2.- OUT / EXIT / RELOOP)
9.-   PITCH BEND
10.- CHANGE FOCUS TREE / TRACKLIST
11.- SCROLL / LOAD / ENTER
12.- LOAD TRACK
13.- FX DRY / WET
14.- FX PARAMETER
15.- MID MAP 1 AND MIDI MAP 2 – FX – ECHO
16.- MIDI MAP 1 – SCRATCH / MIDI MAP 2 – FX – FLANGER
17.- MIDI MAP 1  FX FLANGER / MIDI MAP 2 – SAMPLER 1
18.- MIDI MAP 1 FX WAH / MIDI MAP 2 – SAMPLER 2
19.- FX ECHO BEAT SYNC
20.- SAMPLER VOLUMEN
21.- PFL VOLUMEN (A AND B)
22.- ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS) / KILL = PUSH (HI, MID, BASS)
23.- VOLUMEN CONTROLS AND CROSSFADER
24.- WHEELS

info mapping                    info PDF

Numark Omni Control

HOW TO SET UP?

The system must recognize your Numark Omni Control as Audio and MIDI device before configuring in DJ ProMixer.

CONFIGURATION

Numark Omni control requires download and install Numark Asio Driver.

DJ ProMixer ASIO Numark Omni Control

This controller has two different configurations (for Internal or External Mode):

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Mixtrack Pro as Audio Sound Card.

AUDIO SETTINGS

INTERNAL MODE (Master + Headphones)

DJ ProMixer Numark Omni Control ASIO Internal

DJ ProMixer Numark Omni control Audio Rear Internal

For Internal Mode connect your output in (Output 1) RCA  connectors (L+R) for Master Output.
Connect your headphones in front ( ¼ TSR stereo connector).

EXTERNAL MODE (Deck A + Deck B connected to external mixer)

DJ ProMixer Numark Omni Control ASIO External

DJ ProMixer Numark Omni Control Audio Rear External

For External Mode connect your outputs 1.- RCA  connectors (L+R) for Deck A (Output 1), and  2.- RCA connectors (L+R) for Deck B (Output 2).

MIDI SET UP

DJ ProMixer Numark Omni Control MIDI

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (Numark OMNI CONTROL MIDI0) and select on the right side NUMARK OMNI CONTROL.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

TWO MIDI MAPS

Overview

DJ ProMixer Numark Omni control MIDI map

(Click to enlarge)

Detail

 DJ ProMixer Numark Omni control MIDI map detail

1.-   PLAY
2.-   PAUSE
3.-   CUE
4.-   PITCH
5.-   SYNC
6.-   KEYLOCK
7.-   PFL
8.-   MANUAL LOOP (1.- IN  2.- OUT / EXIT / RELOOP)
9.-   PITCH BEND
10.- CHANGE FOCUS TREE / TRACKLIST
11.- SCROLL / LOAD / ENTER
12.- LOAD TRACK
13.- FX DRY / WET
14.- FX PARAMETER
15.- MID MAP 1 AND MIDI MAP 2 – FX – ECHO
16.- MIDI MAP 1 FX – FLANGER / MIDI MAP 2 – SCRATCH
17.- MIDI MAP 1 SAMPLER 1 / MIDI MAP 2 – FX FLANGER
18.- MIDI MAP 1 SAMPLER 2 / MIDI MAP 2 – FX WAH
19.- FX ECHO BEAT SYNC
20.- SAMPLER VOLUMEN
21.- PFL VOLUMEN (A AND B)
22.- ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS) / KILL = PUSH (HI, MID, BASS)
23.- VOLUMEN CONTROLS AND CROSSFADER
24.- WHEELS

info mapping                    info PDF