Hercules DJ Control Instinct S

HOW TO SET UP?

The system must recognize your Hercules DJ Control Instinct S as Audio and MIDI device before configuring in DJ ProMixer.

Hercules DJ Control Instinct S only requires download and install Hercules ASIO Driver, once installed you can configure it in DJ ProMixer.

 AUDIO SET UP

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Hercules DJ Control Instinct S as Audio Sound Card.

DJ ProMixer ASIO Hercules DJ 4Set

MIDI SET UP

DJ ProMixer MIDI Hercules DJ Control Instinct S

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (HERCULES DJ CONTROL INSTINCTS0) and select on the right side HERCULES DJ CONTROL INSTINCT S.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI  MAP

Overview

DJ ProMixer Hercules DJ Control Instinct S map

Detail

 DJ ProMixer Hercules DJ Control Instinct S map detail


1.-    PLAY / PAUSE
2.-    CUE
3.-    SYNC
4.-    MOVE WITH ACTIVE FUNCTION (CUE/LOOP MEMORY  OR ACTIVE AUTO LOOP)
5.-    PITCH
6.-    BEND (BUTTONS)
7.-    PAD MODE (NOTHING SELECTED) MEMORY CUE/LOOP: PAD 1 – CUE/LOOP 1, PAD 2 – CUE/LOOP 2, PAD 3 – CUE-LOOP 3, PAD 4 – CUE-LOOP 4
8.-    PAD MODE (LOOP SELECTED):
PAD 1 – 1/2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
PAD 2 – X2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
PAD 3 – MANUAL LOOP: IN
PAD 4 – MANUAL LOOP: OUT / EXIT / RELOOP

9.-   PAD MODE (FX SELECTED): PAD 1 – FX 1 (ECHO), PAD 2 – FX 2 (FLANGER), PAD 3 – FX 3 (WAH)
10.-  PAD MODE (SAMPLER SELECTED): PAD 1 – SAMPLE 1, PAD 2 – SAMPLE 2, PAD 3 – SAMPLE 3, PAD 4 – SAMPLE 4
11.-  BEND (WHEEL)
12.-  SCRATCH
13.-  PAD MODE SELECTOR: (7) NOTHING SELECTED: MEMORY CUE/LOOP – (8) LOOP (AUTO/MANUAL) – (9) FX – (10) SAMPLER MODE
14.-  VINYL MODE
15.-  FOLDER-TREE SELECTOR / OPEN CLOSE
16.-  TRACKLIST SELECTOR
17.- TRACKLIST MOVE UP
18.- TRACKLIST MOVE DOWN

19-   LOAD DECK
20-   PFL
21-   ROTARY KNOBS OF THE MIXER (EQ HI, MID,BASS) 
22.-  DECK´S VOLUMEN CONTROLS AND CROSSFADER

info mapping                    info PDF

Advertisements

Hercules DJ Control Air

HOW TO SET UP?

The system must recognize your Hercules DJ Control Air as Audio and MIDI device before configuring in DJ ProMixer.

Hercules DJ Control Air only requires download and install Hercules ASIO Driver, once installed you can configure it in DJ ProMixer.

 AUDIO SET UP

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Hercules DJ Control Air as Audio Sound Card.

DJ ProMixer ASIO Hercules DJ 4Set

MIDI SET UP

DJ ProMixer MIDI Hercules DJ Control Air

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (DJ CONTROL AIR0) and select on the right side HERCULES DJ CONTROL AIR.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI  MAP

Overview

DJ ProMixer Hercules DJ Control Air map

Detail

 Hercules DJ Control Air map detail


1.-    PLAY / PAUSE
2.-    CUE
3.-    SYNC
4.-    MOVE WITH ACTIVE FUNCTION (CUE/LOOP MEMORY  OR ACTIVE AUTO LOOP)
5.-    PITCH
6.-    BEND (BUTTONS)
7.-    PAD MODE (NOTHING SELECTED) MEMORY CUE/LOOP: PAD 1 – CUE/LOOP 1, PAD 2 – CUE/LOOP 2, PAD 3 – CUE-LOOP 3, PAD 4 – CUE-LOOP 4
8.-    PAD MODE (LOOP SELECTED):
PAD 1 – 1/2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
PAD 2 – X2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
PAD 3 – MANUAL LOOP: IN
PAD 4 – MANUAL LOOP: OUT / EXIT / RELOOP

9.-   PAD MODE (FX SELECTED): PAD 1 – FX 1 (ECHO), PAD 2 – FX 2 (FLANGER), PAD 3 – FX 3 (WAH)
10.-  PAD MODE (SAMPLER SELECTED): PAD 1 – SAMPLE 1, PAD 2 – SAMPLE 2, PAD 3 – SAMPLE 3, PAD 4 – SAMPLE 4
11.-  PAD MODE SELECTOR: (8) LOOP (AUTO/MANUAL)
12.-  PAD MODE SELECTOR: (9) FX
13.-  PAD MODE SELECTOR: (10) SAMPLER MODE
14.-  BEND (WHEEL)
15.-  SRATCH

16.-  FOLDER-TREE SELECTOR / OPEN CLOSE
17.-  TRACKLIST SELECTOR
18.-  TRACKLIST MOVE UP
19.-  TRACKLIST MOVE DOWN
20-   LOAD DECK
21-   PFL
22.-  VINYL MODE
23.-  REC
24.-  AIR CONTROL (FX DRY/WET)
25-   ROTARY KNOBS OF THE MIXER (EQ HI, MID,BASS) 
26.-  DECK´S VOLUMEN CONTROLS AND CROSSFADER

IMPORTANT:
DJ ProMixer Hercules Air Control_1
Air Control enables FX Dry/Wet control (24) for booth Decks

info mapping                    info PDF

Hercules DJ Control Instinct

HOW TO SET UP?

The system must recognize your Hercules DJ Control Instinct as Audio and MIDI device before configuring in DJ ProMixer.

Hercules DJ Control Instinct only requires download and install Hercules ASIO Driver, once installed you can configure it in DJ ProMixer.

 AUDIO SET UP

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Hercules DJ Control Instinct as Audio Sound Card.

DJ ProMixer ASIO Hercules DJ 4Set

MIDI SET UP

DJ ProMixer MIDI Hercules DJ Control Instinct

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (HERCULES DJ CONTROL INSTINCT0) and select on the right side HERCULES DJ CONTROL INSTINCT.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI  MAP

Overview

DJ ProMixer Hercules DJ Control Instinct map

Detail

 DJ ProMixer Hercules DJ Control Instinct map detail


1.-    PLAY / PAUSE
2.-    CUE
3.-    SYNC
4.-    MOVE WITH ACTIVE FUNCTION (CUE/LOOP MEMORY  OR ACTIVE AUTO LOOP)
5.-    PITCH
6.-    BEND (BUTTONS)
7.-    PAD MODE (NOTHING SELECTED) MEMORY CUE/LOOP: PAD 1 – CUE/LOOP 1, PAD 2 – CUE/LOOP 2, PAD 3 – CUE-LOOP 3, PAD 4 – CUE-LOOP 4
8.-    PAD MODE (LOOP SELECTED):
PAD 1 – 1/2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
PAD 2 – X2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
PAD 3 – MANUAL LOOP: IN
PAD 4 – MANUAL LOOP: OUT / EXIT / RELOOP

9.-   PAD MODE (FX SELECTED): PAD 1 – FX 1 (ECHO), PAD 2 – FX 2 (FLANGER), PAD 3 – FX 3 (WAH)
10.-  PAD MODE (SAMPLER SELECTED): PAD 1 – SAMPLE 1, PAD 2 – SAMPLE 2, PAD 3 – SAMPLE 3, PAD 4 – SAMPLE 4
11.-  BEND (WHEEL)
12.-  SCRATCH
13.-  PAD MODE SELECTOR: (7) NOTHING SELECTED: MEMORY CUE/LOOP – (8) LOOP (AUTO/MANUAL) – (9) FX – (10) SAMPLER MODE
14.-  VINYL MODE
15.-  FOLDER-TREE SELECTOR / OPEN CLOSE
16.-  TRACKLIST SELECTOR
17.-  TRACKLIST MOVE UP
18.-  TRACKLIST MOVE DOWN

19-   LOAD DECK
20-   PFL
21-   ROTARY KNOBS OF THE MIXER (EQ HI, MID,BASS) 
22.-  DECK´S VOLUMEN CONTROLS AND CROSSFADER

info mapping                    info PDF

Hercules DJ 4Set

HOW TO SET UP?

The system must recognize your Hercules DJ 4 Set as Audio and MIDI device before configuring in DJ ProMixer.

Hercules DJ 4 Set only requires download and install Hercules ASIO Driver, once installed you can configure it in DJ ProMixer.

 AUDIO SET UP

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Hercules DJ 4 Set as Audio Sound Card.

DJ ProMixer ASIO Hercules DJ 4Set

MIDI SET UP

DJ ProMixer MIDI Hercules DJ 4Set

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (HERCULES DJ 4 SET MID0) and select on the right side HERCULES DJ 4 SET.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI  MAP

Overview

DJ ProMixer Hercules DJ 4Set map

Detail

 DJ ProMixer Hercules DJ 4Set map detail


1.-    PLAY / PAUSE
2.-    CUE
3.-    SYNC
4.-    MOVE WITH ACTIVE FUNCTION (CUE/LOOP MEMORY  OR ACTIVE AUTO LOOP)
5.-    PITCH
6.-    BEND (BUTTONS)
7.-    1/2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
8.-    X2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
9.-    (SHIFT) ENABLE / DISABLE FX DIRECT BUTTONS
10.-  NOTHING SELECTED: MANUAL LOOP IN / OUT-EXIT-RELOOP
11.-  (SHIFT ENABLED) FX DIRECT BUTTONS (FX 1: ECHO, FX2 : FLANGER, FX3 : WAH)
12.-  BEND (WHEEL)
13.-  SCRATCH
14.-  PFL
15.-  FOLDER-TREE SELECTOR / OPEN CLOSE
16.-  TRACKLIST SELECTOR
17.- TRACKLIST MOVE UP
18.- TRACKLIST MOVE DOWN

19-   LOAD DECK
20-   VINYL MODE
21-   REC
22-   ROTARY KNOBS OF THE MIXER (EQ HI, MID,BASS) 
23.-  DECK´S VOLUMEN CONTROLS AND CROSSFADER

info mapping                    info PDF