HOW TO SET UP?

The system must recognize your Numark Omni Control as Audio and MIDI device before configuring in DJ ProMixer.

CONFIGURATION

Numark Omni control requires download and install Numark Asio Driver.

This controller has two different configurations (for Internal or External Mode):

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Mixtrack Pro as Audio Sound Card.

AUDIO SETTINGS

INTERNAL MODE (Master + Headphones)

For Internal Mode connect your output in (Output 1) RCA  connectors (L+R) for Master Output.
Connect your headphones in front ( ¼ TSR stereo connector).

EXTERNAL MODE (Deck A + Deck B connected to external mixer)

For External Mode connect your outputs 1.- RCA  connectors (L+R) for Deck A (Output 1), and  2.- RCA connectors (L+R) for Deck B (Output 2).

MIDI SET UP

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (Numark OMNI CONTROL MIDI0) and select on the right side NUMARK OMNI CONTROL.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

TWO MIDI MAPS

Overview

(Click to enlarge)

Detail

1.-   PLAY
2.-   PAUSE
3.-   CUE
4.-   PITCH
5.-   SYNC
6.-   KEYLOCK
7.-   PFL
8.-   MANUAL LOOP (1.- IN  2.- OUT / EXIT / RELOOP)
9.-   PITCH BEND
10.- CHANGE FOCUS TREE / TRACKLIST
11.- SCROLL / LOAD / ENTER
12.- LOAD TRACK
13.- FX DRY / WET
14.- FX PARAMETER
15.- MID MAP 1 AND MIDI MAP 2 – FX – ECHO
16.- MIDI MAP 1 FX – FLANGER / MIDI MAP 2 – SCRATCH
17.- MIDI MAP 1 SAMPLER 1 / MIDI MAP 2 – FX FLANGER
18.- MIDI MAP 1 SAMPLER 2 / MIDI MAP 2 – FX WAH
19.- FX ECHO BEAT SYNC
20.- SAMPLER VOLUMEN
21.- PFL VOLUMEN (A AND B)
22.- ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS) / KILL = PUSH (HI, MID, BASS)
23.- VOLUMEN CONTROLS AND CROSSFADER
24.- WHEELS