Akiyama TTWO

HOW TO SET UP?

The system must recognize your Akiyama TTWO as Audio and MIDI device before configuring in DJ ProMixer.

Akiyama TTWO only requires download and install TTWO Akiyama ASIO Driver, once installed you can configure it in DJ ProMixer.

 AUDIO SET UP

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Akiyama TTWO as Audio Sound Card.

DJ ProMixer ASIO Akiyama TTWO

 

DJ ProMixer Akiyama TTWO Audio Connections

For Internal Mode choose your output: 1.- for 1/4 TRS connectors (balanced)  or 2.- for RCA (unbalanced) (1+2).

MIDI SET UP

DJ ProMixer MIDI Akiyama TTWO

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (AKIYAMA TTWO0) and select on the right side AKIYAMA TTWO.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI  MAP

Overview

DJ ProMixer Akiyama TTWO map

Detail

 DJ ProMixer Akiyama TTWO map detail


1.-    PLAY / PAUSE
2.-    CUE
3.-    SYNC
4.-    VINYL MODE
5.-    PITCH
6.-    BEND (BUTTONS)
7.-    FX DRY / WET
8.-    FX PARAMETER
9.-    FX ECHO SYNC (FROM 2/1 TO 1/8 BEATS)
10.-  SAMPLER DIRECT BUTTONS SELECTOR
11.-  NOTHING SELECTED: MEMORY CUE / LOOP DIRECT BUTTONS (1, 2, 3, 4)
12.-  SAMPLER SELECTOR ENABLED: SAMPLER DIRECT BUTTONS (1, 2, 3, 4)
13.-  (SHIFT +) FX DIRECT BUTTONS (FX 1: ECHO, FX2 : FLANGER, FX3 : WAH)
14.-  MANUAL LOOP: IN / OUT-EXIT-RELOOP
15.-  1/2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
16.-  X2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
17.-  PFL
18.-  BEND (WHEEL)
19-  SCRATCH
20-  SHIFT
21-  LOAD DECK
22-  SCROLL: TRACKLIST
23.- (SHIFT +) SCROLL: TREE
24.- ROTARY KNOBS OF THE MIXER (EQ HI, MID,BASS +PUSH KILL), GAIN
25.- DECK´S VOLUMEN CONTROLS AND CROSSFADER

info mapping                    info PDF

Advertisements

Akiyama Quattro

HOW TO SET UP?

The system must recognize your Akiyama Quattro as Audio and MIDI device before configuring in DJ ProMixer.

Akiyama Quattro only requires download and install Akiyama Quattro ASIO Driver, once installed you can configure it in DJ ProMixer.

 AUDIO SET UP

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Akiyama Quattro as Audio Sound Card.

DJ ProMixer ASIO Akiyama Quattro

DJ ProMixer Akiyama Quattro Audio Connections_1

For Internal Mode choose your output: 1.- for XLR connectors (balanced)  or 2.- for RCA (unbalanced) (1+2).

MIDI SET UP

DJ ProMixer MIDI Akiyama Quattro

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (AKIYAMA QUATRO0) and select on the right side AKIYAMA QUATTRO.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI  MAP

Overview

DJ ProMixer Akiyama Quattro map

Detail

DJ ProMixer Akiyama Quattro map detail


1.-    PLAY / PAUSE
2.-    CUE
3.-    SYNC
4.-    KEYLOCK
5.-    VINYL MODE
6.-    PITCH
7.-    BEND (BUTTONS)
8.-    FX DRY / WET
9.-    FX PARAMETER
10.-  FX ECHO SYNC (FROM 2/1 TO 1/8 BEATS)
11.-  FX DIRECT BUTTONS (FX 1: ECHO, FX2 : FLANGER, FX3 : WAH)
12.-  (SHIFT +) SAMPLER DIRECT BUTTONS (1, 2, 3, 4)
13.-  MEMORY CUE / LOOP DIRECT BUTTONS (1, 2, 3, 4)
14.-  MANUAL LOOP: IN / OUT-EXIT-RELOOP
15.-  1/2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
16.-  X2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
17.-  PFL
18.-  BEND (WHEEL)
19-  SCRATCH
20-  SHIFT
21-  OPEN / CLOSE FOLDER
22-  SCROLL: TRACKLIST
23.- (SHIFT +) SCROLL: TREE
24.- LOAD DECK
25.- ROTARY KNOBS OF THE MIXER (EQ HI, MID,BASS +PUSH KILL), GAIN
26.- DECK´S VOLUMEN CONTROLS AND CROSSFADER

info mapping                    info PDF

Akiyama Quark / SC

HOW TO SET UP?

The system must recognize your Akiyama Quark as Audio Device (only Quark SC) and MIDI Device (for booth models) before configuring in DJ ProMixer.

CONFIGURATION

Akiyama Quark SC has two different audio set up (for Internal or External Mode):

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Akiyama Quark SC as Audio Sound Card.

AUDIO SETTINGS

INTERNAL MODE (Master + Headphones)

DJ ProMixer Audio Internal Akiyama Quark SC

 DJ ProMixer Akiyama Quark Audio Connections Internal

For Internal Mode connect your output in (1) RCA  connectors (L+R) for Master Output.

Connect your headphones in front ( ¼ TSR stereo connector).

EXTERNAL MODE (Deck A + Deck B connected to external mixer)

DJ ProMixer Audio External Akiyama Quark SC

DJ ProMixer Akiyama Quark Audio Connections External

For External Mode connect your outputs 1.- RCA  connectors (L+R) for Deck A, and  2.- RCA connectors (L+R) for Deck B.

Important: Akiyama Quark SC is designed to be used as internal mode (with internal Sound Card using master output  & headphones) or external mode (using the internal soundcard for each deck).

Akiyama Quark have not soundcard, it´s only MIDI Controller.

MIDI SET UP

DJ ProMixer MIDI Akiyama Quark SC

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (Quark0 / Quark SC0) and select on the right side AKIYAMA QUARK SC.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

Overview

DJ ProMixer Akiyama Quark map

(Click to enlarge)

Detail

DJ ProMixer Akiyama Quark map detail

1.-   PLAY / PAUSE
2.-   CUE
3.-   SYNC
4.-   MANUAL LOOP: IN / OUT / EXIT-RELOOP
5.-   AUTO LOOP FROM ¼ TO 32 BEATS (IN – STARTS 4 BEATS, EXIT, RELOOP)
6.-   MEMORIZE CUE / LOOP
7.-   FX DRY / WET
8.-   FX PARAMETER
9.-   FX ECHO SYNC (FROM 2/1 TO 1/8 BEATS)
10.- FX 1: ECHO
11.- FX 2: FLANGER
12.- FX 3: WAH
13.- VINYL MODE
14.- PITCH
15.- BEND (BUTTONS)
16.- MULTISELECTOR: NOTHING SELECTED (LIGHT OFF): MEMORY CUE / LOOP DIRECT BUTTONS (1, 2, 3, 4, 5, 6)
17.- MULTISELECTOR: 1 PUSH (ORANGE LIGHT) SAMPLER DIRECT BUTTONS (1, 2, 3, 4, 5, 6)
18.- MULTISELECTOR: SECOND PUSH (GREEN LIGHT) AUTO LOOP DIRECT BUTTONS (1/4, 1/2, 1, 2, 4, 8 BEATS)
19.- BEND (WHEEL)
20.- SCRATCH
21.- LOAD DECKS
22.- PFL
23.- CHANGE FOCUS TREE / TRACKLIST
24.- TRACKLIST SCROLL
25.- ROTARY KNOBS OF THE MIXER (EQ HI, MID,BASS +PUSH KILL), GAIN
26.- DECK´S VOLUMEN CONTROLS AND CROSSFADER

info mapping                    info PDF

Akiyama Syncron

HOW TO SET UP?

The system must recognize your Akiyama Syncron as Audio and MIDI device before configuring in DJ ProMixer.

Akiyama Syncron only requires download and install Akiyama ASIO Driver, once installed you can configure it in DJ ProMixer.

 AUDIO SET UP

Akiyama Syncron has two different configurations (for Internal or External Mode):

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Akiyama Syncron as Audio Sound Card.

AUDIO SETTINGS

INTERNAL MODE (Master + Headphones)

DJ ProMixer Akiyama Syncron ASIO

DJ ProMixer Akiyama Syncron Rear internal

 

 

For Internal Mode choose your output: 1.- for XLR connectors (balanced)  or 2.- for RCA (unbalanced) (1+2).

 

EXTERNAL MODE (Deck A + Deck B connected to external mixer)

DJ ProMixer Akiyama Syncron ASIO external

DJ ProMixer Akiyama Syncron Rear external

For External Mode connect your outputs 1.- RCA  connectors (L+R) for Deck A, and  2.- RCA connectors (L+R) for Deck B.

MIDI SET UP

 DJ ProMixer Akiyama Syncron MIDI

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (SYNCRON0) and select on the right side AKIYAMA SYNCRON.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI  MAP

Overview

DJ ProMixer Akiyama Syncron map

 

Detail

 DJ ProMixer Akiyama Syncron map detail


1.-     PLAY / PAUSE
2.-     CUE
3.-     AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS) IN  EXIT / RELOOP IN
4.-    TRACK SCROLL / PUSH (LOAD)
5.-    FOLDER SCROLL / PUSH (OPEN-CLOSE)
6.-    CUE LOOP MEMORY (1 TO 4) (NORMAL MODE) / SAMPLES (1 TO 4) (SAMPLE BUTTON ACTIVATED)
7.-    MEMORIZE CUE / LOOP POINT
8.-    DELETE CUE /LOOP POINT
9.-    ENABLE SAMPLER (HOLD BUTTON) (SAMPLES 1,2,3,4)
10.-  FX ECHO
11.-  FX FLANGER
12.-  FX WAH
13.-  REVERSE
14.-  BRAKE
15.-  WHEEL MODE: FX PARAMETER
16.-  WHEEL MODE: VINYL
17.-  WHEEL MODE: SEARCH
18.-  PFL
19-  CHANGE TEMPO RANGE (4%, 8%, 10%, 12%, 16%, 32%)
20-  KEYLOCK
21-  MOVE WITH ACTIVE FUNCTION (CUE/LOOP MEMORY  OR ACTIVE AUTO LOOP)
22-  PITCH
23.- BEND (BUTTONS)
24.- BEND (WHEEL)
25.- SCRATCH
26.- SYNC
27.- ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS)
28.- DECK´S VOLUMEN CONTROLS AND CROSSFADER

info mapping                    info PDF