Vestax VCI – 100

HOW TO SET UP?

The system must recognize your Vestax VCI – 100 before configuring in DJ ProMixer.
IMPORTANT: Vestax VCI – 100 is a MIDI Device (It has not integrated audio device/s) For audio configuration choose your work mode and audio sound card/s).

MIDI CONFIGURATION

DJ ProMixer MIDI Vestax VCI-100

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (VESTAX VCI 100 MIDI0) and select on the right side VESTAX VCI 100.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

Overview

DJ ProMixer Vestax VCI-100 map

 

1.-   PLAY
2.-   PAUSE
3.-   CUE
4.-   CUE / LOOP MEMORY
5.-   PITCH
6.-   AUTO LOOP (X4)
7.-   KEYLOCK
8.-   VINYL MODE
9.-   SYNC

TRACKLIST DETAIL

DJ ProMixer Vestax VCI-100 bowser detail map

______________________________________________________________________

10.- CHANGE FOCUS TREE / TRACKLIST
11.- ENTER TREE / TRACKLIST
12.- TRACKLIST UP
13.- TRACKLIST DOWN
14.- LOAD TRACK A
15.- LOAD TRACK B
16.- EXIT / RELOOP (A / B)
17.- AUTO LOOP 1/2 (A / B)
18.- AUTO LOOP X2 (A / B)
______________________________________________________________________

19.- PFL
20.- HEADPHONES VOLUMEN

FX / CUE DETAIL

DJ ProMixer FX CUE Vestax VCI 100 Detail

______________________________________________________________________

21.- SELECTOR FX-A / FX-B / CUE
22.- SELECTOR A POSITION (RED):   DECK A FX 1: ECHO
22.- SELECTOR B POSITION (BLUE): DECK B FX 1: ECHO
22.- SELECTOR mas POSITION (WHITE): DECK A CUE / LOOP MEM MOVE “<”
23.- SELECTOR A POSITION (RED):   DECK A FX 2: FLANGER
23.- SELECTOR B POSITION (BLUE): DECK B FX 2: FLANGER
23.- SELECTOR mas POSITION (WHITE): DECK A CUE / LOOP MEM MOVE “>”
24.- SELECTOR A POSITION (RED):   DECK A FX 3: WAH
24.- SELECTOR B POSITION (BLUE): DECK B FX 3: WAH
24.- SELECTOR mas POSITION (WHITE): DECK B CUE / LOOP MEM MOVE “<”
25.- SELECTOR mas POSITION (WHITE): DECK B CUE / LOOP MEM MOVE “>”
26.- SELECTOR A POSITION (RED):   DECK A FX DRY/WET
26.- SELECTOR B POSITION (BLUE): DECK B FX DRY/WET
27.- SELECTOR A POSITION (RED):   DECK A FX PARAMETER
27.- SELECTOR B POSITION (BLUE): DECK B FX PARAMETER
______________________________________________________________________

28.- WHEELS
29.- VOLUMEN CONTROLS AND CROSSFADER
30.- ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS) / KILL = PUSH (HI, MID, BASS)

info mapping                    info PDF

Advertisements

Denon DN-S 1200

HOW TO SET UP?

The system must recognize your Denon DN S 1200 device/s before configuring in DJ ProMixer.
IMPORTANT: Denon DN S 1200 is a MIDI and audio sound card device
Download and install DENON DJ ASIO Driver

DJ ProMixer Denon ASIO Panel

MIDI CONFIGURATION

Single Mode (2 Denon S 1200 Connected)

DJ ProMixer MIDI Denon DN S 1200 Single

Select in MIDI PORT / MIDI MAP 1 on the left side one device (Denon DN S 1200 0) and select on the right side DENON DN S 1200 (SINGLE A).XML. Select in MIDI PORT / MIDI MAP 2 on the left side the other device (Denon DN S 1200 I) and select on the right side DENON DN S 1200 (SINGLE B).XML

Dual Mode

DJ ProMixer MIDI Denon DN S 1200 Dual

Select in MIDI PORT / MIDI MAP 1 on the left side Numark DENON DN S 12000, and select on the right side DENON DN S 1200 (A AND B).XML. Nothing selected in MIDI PORT / MIDI MAP 2 How to change the decks? Two ways: 1.- Hardware: Use the “Single Button”. 2.- Software: By clicking the headphone button of the deck.

AUDIO CONFIGURATION

DJ ProMixer ASIO Denon DN S 1200

Open DJ ProMixer and go to “Config”, open “Audio Setup”, here you can select your Denon DN S 1200 as Audio Sound Card.
IMPORTANT: Denon DN S 1200 works with ASIO Driver, also it can be used with Direct Sound Driver Mode.

MIDI MAP

DJ ProMixer Denon S 1200 map

1.-   PLAY / PAUSE
2.-   CUE
 
3.-   SYNC
 
4.-   MANUAL LOOP: IN
5.-   MANUAL LOOP: OUT
6.-   AUTO LOOP: 1/2
7.-   AUTO LOOP: 2X
8.-   EXIT / RELOOP
9.-   FX 1: ECHO
10.- FX 2: FLANGER
11.- FX 3: WAH

12.- MEMORY CUE / LOOP
13.- SEARCH MODE
14.- SCROLL
15.- PUSH: LOAD / ENTER
16.- CHANGE FOCUS TREE / TRACKLIST

17.- CHANGE FOCUS PLAYLIST / GROUPS-SUBGROUPS / EXPLORER 
18.- PITCH

19.- KEYLOCK
20.- PITCH BEND (BUTTONS)
21.- SCRATCH MODE (WHEEL)
22.- BEND (WHEEL)
23.- BRAKE
24.- REVERSE
25.- DECK SELECTOR (DECK A / DECK B) (ONLY DUAL MODE)
27.- LINK TO PC (SOURCE)

info mapping                    info PDF

Hercules DJ Control MP3

HOW TO SET UP?

The system must recognize your Hercules DJ Control MP3 as HID device before configuring in DJ ProMixer.

Hercules DJ Control MP3 only requires download and install Hercules Driver, once installed you can configure it in DJ ProMixer.

IMPORTANT: Hercules DJ Control MP3 is a MIDI Device (have not integrated audio device/s) For audio configuration choose your work mode and audio sound card/s).

HID SET UP

Hercules DJ Console Mk2 has two HID maps:

1.- Normal: Respecting the name of the serigraphy
 DJ ProMixer HID Hercules DJ Control MP3 (Normal)

In “Config” go to “HID Controllers” and then select in HID PORT / HID MAP 1 on the left side one device (HERCULES DJ CONSOLE MK2 MID0) and select on the right side HERCULES DJ CONSOLE MK2 (NORMAL).XML. HID PORT / HID MAP 2: Nothing Selected.

2.- Pitch Inverse: Inverting Pitch / Volume

DJ ProMixer HID Hercules DJ Control MP3 (Inverse)

In “Config” go to “HID Controllers” and then select in HID PORT / HID MAP 1 on the left side one device (HERCULES DJ CONSOLE MK2 MID0) and select on the right side HERCULES DJ CONSOLE MK2 (PITCH INVERSE).XML. HID PORT / HID MAP 2: Nothing Selected.

HID MAP

DJ ProMixer Hercules DJ Control MP3 map

 Overview

Detail

DJ ProMixer Hercules DJ Control MP3 map detail


1.-   PLAY / PAUSE
2.-   CUE
3.-   SYNC
4.-   MOVE WITH ACTIVE FUNCTION (CUE/LOOP MEMORY  OR ACTIVE AUTO LOOP
5.-   BEND (BUTTONS)
6.-   PITCH (NORMAL MAP)
6.-   VOLUMEN (PITCH INVERSE MAP)
7.-   VOLUMEN (NORMAL MAP)
7.-   PITCH (PITCH INVERSE)
8.-   PAD BUTTON SELECTOR: OFF
BUTTON 1 – SAMPLE 1
BUTTON 2 – SAMPLE 2
BUTTON 3 – SAMPLE 3
8.-   PAD BUTTON SELECTOR: POSITION “FX” (RED LIGHT)
BUTTON 1 – FX 1 (ECHO)
BUTTON 2 – FX 2 (FLANGER)
BUTTON 3 – FX 3 (WAH)
8.-   PAD BUTTON SELECTOR: POSITION “CUE” (YELLOW LIGHT)
BUTTON 1 – CUE / LOOP 1
BUTTON 2 – CUE / LOOP 2
BUTTON 3 – CUE / LOOP 3
8.-   PAD BUTTON SELECTOR: POSITION “LOOP” (GREEN LIGHT)
BUTTON 1 – LOOP IN
BUTTON 2 – LOOP OUT
BUTTON 3 – EXIT / RELOOP

9.-   KEYLOCK
10.- LOAD DECK
11.- ROTARY KNOBS OF THE MIXER (EQ HI, MID,BASS)
12.- CROSSFADER
13.- PFL
14.- WHEEL

info mapping                    info PDF

Hercules DJ Console MK2

HOW TO SET UP?

The system must recognize your Hercules DJ Console MK2 as Audio and HID device before configuring in DJ ProMixer.

Hercules DJ Console MK2 only requires download and install Hercules ASIO Driver, once installed you can configure it in DJ ProMixer.

CONFIGURATION

Hercules DJ Console MK2 has two different set up (for Internal or External Mode):

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Hercules DJ Console MK2 as Audio Sound Card.

AUDIO SETTINGS

INTERNAL MODE (Master + Headphones)

DJ ProMixer ASIO Hercules DJ 4Set

DJ ProMixer Hercules DJ Console MK2 audio connections 2

For Internal Mode choose your output: 1.-  RCA or  2.- 1/8  TSR connector.

Connect your headphones in front ( ¼ TSR stereo connector).

EXTERNAL MODE (Deck A + Deck B connected to external mixer)

DJ ProMixer ASIO Hercules DJ 4Set Multi Channel External Mixer

DJ ProMixer Hercules DJ Console MK2 audio connections

For External Mode choose your outputs: Deck 1.- (1) RCA or (2) 1/8 TSR connector  Deck 2.-  (3) RCA or 1/8 TSR connector

Important: Hercules DJ Console MK2 is designed to be used as internal mode (with internal Sound Card using master output  & headphones) or external mode (using the internal soundcard for each deck).

HID SET UP

Hercules DJ Console Mk2 has two HID maps:

1.- Normal: Respecting the name of the serigraphy

DJ ProMixer HID Hercules DJ Console MK2 (Normal)

In “Config” go to “HID Controllers” and then select in HID PORT / HID MAP 1 on the left side one device (HERCULES DJ CONSOLE MK2 MID0) and select on the right side HERCULES DJ CONSOLE MK2 (NORMAL).XML. HID PORT / HID MAP 2: Nothing Selected.

2.- Pitch Inverse: Inverting Pitch / Volume

DJ ProMixer HID Hercules DJ Console MK2 (Inverse)

In “Config” go to “HID Controllers” and then select in HID PORT / HID MAP 1 on the left side one device (HERCULES DJ CONSOLE MK2 MID0) and select on the right side HERCULES DJ CONSOLE MK2 (PITCH INVERSE).XML. HID PORT / HID MAP 2: Nothing Selected.

HID MAP

DJ ProMixer Hercules DJ Console MK2 map

Overview

Detail

DJ ProMixer Hercules DJ Console MK2 map detail


1.-   PLAY / PAUSE
2.-   CUE
3.-   SYNC
4.-   MOVE WITH ACTIVE FUNCTION (CUE/LOOP MEMORY  OR ACTIVE AUTO LOOP
5.-   BEND (BUTTONS)
6.-   PITCH (NORMAL MAP)
6.-   VOLUMEN (PITCH INVERSE MAP)
7.-   VOLUMEN (NORMAL MAP)
7.-   PITCH (PITCH INVERSE)
8.-   PAD BUTTON SELECTOR: OFF
BUTTON 1 – SAMPLE 1
BUTTON 2 – SAMPLE 2
BUTTON 3 – SAMPLE 3
8.-   PAD BUTTON SELECTOR: POSITION “FX” (RED LIGHT)
BUTTON 1 – FX 1 (ECHO)
BUTTON 2 – FX 2 (FLANGER)
BUTTON 3 – FX 3 (WAH)
8.-   PAD BUTTON SELECTOR: POSITION “CUE” (YELLOW LIGHT)
BUTTON 1 – CUE / LOOP 1
BUTTON 2 – CUE / LOOP 2
BUTTON 3 – CUE / LOOP 3
8.-   PAD BUTTON SELECTOR: POSITION “LOOP” (GREEN LIGHT)
BUTTON 1 – LOOP IN
BUTTON 2 – LOOP OUT
BUTTON 3 – EXIT / RELOOP

9.-   KEYLOCK
10.- LOAD DECK
11.- ROTARY KNOBS OF THE MIXER (EQ HI, MID,BASS)
12.- CROSSFADER
13.- SOURCE AUDIO SOUND CARD (DECK A / B)
14.- WHEEL

info mapping                    info PDF

Hercules DJ Control MP3 E2

HOW TO SET UP?

The system must recognize your Hercules DJ Control MP3 E2 as MIDI device before configuring in DJ ProMixer.

Hercules DJ Control MP3 E2 only requires download and install Hercules Driver, once installed you can configure it in DJ ProMixer.

IMPORTANT: Hercules Control MP3 E2 is a MIDI Device (It has not integrated audio device/s) For audio configuration choose your work mode and audio sound card/s).

MIDI SET UP

DJ ProMixer MIDI Hercules DJ Control E2

 

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (HERCULES DJ CONTROL MP3 E2 MID0) and select on the right side HERCULES DJ CONTROL MP3 E2.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

Hercules DJ Control E2 map

Overview

Detail

Hercules DJ Control E2 map detail

 

1.-   PLAY / PAUSE
2.-   CUE
3.-   SYNC
4.-   MOVE WITH ACTIVE FUNCTION (CUE/LOOP MEMORY  OR ACTIVE AUTO LOOP
5.-   PITCH
6.-   BEND (BUTTONS)
7.-   PAD MODE SELECTOR: OFF – LOOP ACTIVE , ON – FX ACTIVE
8.-   PAD MODE SELECTOR OFF: LOOP ACTIVE
PAD 1 – 1/2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
PAD 2 – X2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
PAD 3 – MANUAL LOOP: IN
PAD 4 – MANUAL LOOP: OUT / EXIT / RELOOP
9.-   PAD MODE SELECTOR ON: FX ACTIVE
PAD 1 – FX 1 (ECHO)
PAD 2 – FX 2 (FLANGER)

PAD 3 – FX 3 (WAH)
10.- KEYLOCK
11.- BEND (WHEEL)
12.- SCRATCH
13.- AUTOMIX
14.- SCRATCH A / B (BUTTON)
15.- CHANGE FOCUS TREE / TRACKLIST
16.- OPEN PLAYLIST
17.- TRACKLIST MOVE UP
18.- TRACKLIST MOVE DOWN
19.-  LOAD DECK
20.-  PFL
21.-  ROTARY KNOBS OF THE MIXER (EQ HI, MID,BASS)
22.-  DECK´S VOLUMEN CONTROLS AND CROSSFADER


info mapping                    info PDF

Hercules DJ Console MK4

HOW TO SET UP?

The system must recognize your Hercules DJ Console MK4 as Audio and MIDI device before configuring in DJ ProMixer.

Hercules DJ Console MK4 only requires download and install Hercules ASIO Driver, once installed you can configure it in DJ ProMixer.

CONFIGURATION

Hercules DJ Console MK4 has two different set up (for Internal or External Mode):

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Hercules DJ Console MK4 as Audio Sound Card.

AUDIO SETTINGS

INTERNAL MODE (Master + Headphones)

DJ ProMixer ASIO Hercules DJ 4Set

DJ ProMixer Hercules DJ Control MK4 audio connections

For Internal Mode choose your output: 1.-  RCA or  2.- 1/8  TSR connector.

Connect your headphones in front ( ¼ TSR stereo connector).

EXTERNAL MODE (Deck A + Deck B connected to external mixer)

DJ ProMixer ASIO Hercules DJ 4Set Multi Channel External Mixer

DJ ProMixer Hercules DJ Control MK4 audio connections 2

 

For External Mode choose your outputs: Deck 1.- (1) RCA or (2) 1/8 TSR connector  Deck 2.-  (3) RCA

Important: Hercules DJ Console MK4 is designed to be used as internal mode (with internal Sound Card using master output  & headphones) or external mode (using the internal soundcard for each deck).

MIDI SET UP

DJ ProMixer MIDI Hercules DJ Console MK4

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (HERCULES DJ CONSOLE MK4 MID0) and select on the right side HERCULES DJ CONSOLE MK4.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

DJ ProMixer Hercules DJ Control MK4 mapOverview

Detail

DJ ProMixer Hercules DJ Control MK4 map detail

1.-   PLAY / PAUSE
2.-   CUE
3.-   SYNC
4.-   MOVE WITH ACTIVE FUNCTION (CUE/LOOP MEMORY  OR ACTIVE AUTO LOOP
5.-   PITCH
6.-   BEND (BUTTONS)
7.-   PAD MODE SELECTOR: OFF – LOOP ACTIVE , ON – FX ACTIVE
8.-   PAD MODE SELECTOR OFF: LOOP ACTIVE
PAD 1 – 1/2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
PAD 2 – X2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
PAD 3 – MANUAL LOOP: IN
PAD 4 – MANUAL LOOP: OUT / EXIT / RELOOP
9.-   PAD MODE SELECTOR ON: FX ACTIVE
PAD 1 – FX 1 (ECHO)
PAD 2 – FX 2 (FLANGER)

PAD 3 – FX 3 (WAH)
10.- SOURCE AUDIO SOUND CARD (DECK A / B)
11.- BEND (WHEEL)
12.- SCRATCH
13.- ENABLE MIC (AUDIO SOUND CARD)
14.- SCRATCH A / B (BUTTON)
15.- CHANGE FOCUS TREE / TRACKLIST
16.- OPEN PLAYLIST
17.- TRACKLIST MOVE UP
18.- TRACKLIST MOVE DOWN
19.-  LOAD DECK
20.-  PFL
21.-  ROTARY KNOBS OF THE MIXER (EQ HI, MID,BASS)
22.-  DECK´S VOLUMEN CONTROLS AND CROSSFADER


info mapping                    info PDF

Hercules DJ Console Steel

HOW TO SET UP?

The system must recognize your Hercules DJ Console Steel as MIDI device before configuring in DJ ProMixer.

Hercules DJ Console Steel only requires download and install Hercules Driver, once installed you can configure it in DJ ProMixer.

IMPORTANT: Hercules DJ Console Steel has not integrated audio device/s. For audio configuration choose your work mode and audio sound card/s.

MIDI SET UP

DJ ProMixer MIDI Hercules DJ Console Steel

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (HERCULES DJ CONSOLE STEEL MID0) and select on the right side HERCULES DJ CONSOLE STEEL.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

DJ ProMixer Hercules DJ Console Steel map

Overview

Detail

DJ ProMixer Hercules DJ Console Steel map detail

1.-   PLAY
2.-   PAUSE
3.-   CUE
4.-   SYNC
5.-   PITCH
6.-   BEND (BUTTONS)
7.-   1/2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
7.-   (SHIFT ENABLED) MEMORY CUE / LOOP 1
8.-   X2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
8.-   (SHIFT ENABLED) MEMORY CUE / LOOP 2
9.-   MANUAL LOOP: IN
9.-   (SHIFT ENABLED) MEMORY CUE / LOOP 3
10.- MANUAL LOOP: OUT / EXIT / RELOOP
10.- (SHIFT ENABLED) MEMORY CUE / LOOP 4
11.- FX 1: ECHO
11.- (SHIFT ENABLED) SAMPLE 1
12.- FX 2: FLANGER
12.- (SHIFT ENABLED) SAMPLE 2

13.- MOVE WITH ACTIVE FUNCTION (CUE/LOOP MEMORY  OR ACTIVE AUTO LOOP)
14.- BEND (WHEEL)
15.- SCRATCH
16.- SCRATCH (BUTTON)
17.- CHANGE FOCUS TREE / TRACKLIST
18.- OPEN PLAYLIST

19.- TRACKLIST MOVE UP
20.- TRACKLIST MOVE DOWN
21.- LOAD DECK
22.- KILL (EQ. TREBLE)
23.- KILL (EQ. MID)
24.- KILL (EQ. BASS)
25.- PFL
26.- ROTARY KNOBS OF THE MIXER (EQ HI, MID,BASS)
27.- GAIN

28.- DECK´S VOLUMEN A / B
29.- SHIFT
30.- FX DRY / WET (DECK A / B)
31.- FX PARAMETER (DECK A / B)
32.- DECK SELECTOR (A / B) FX DRY / WET – FX PARAMETER
33.- SAMPLER VOLUMEN
34.- CROSSFADER
35.- PFL / CUE MIX: LEFT (DECK A) / RIGHT (DECK B)
36.- HEADPHONES VOLUMEN A / B

info mapping                    info PDF

Hercules DJ Console RMX

HOW TO SET UP?

The system must recognize your Hercules DJ Console RMX as Audio and MIDI device before configuring in DJ ProMixer.

Hercules DJ Console RMX only requires download and install Hercules ASIO Driver, once installed you can configure it in DJ ProMixer.

CONFIGURATION

Hercules DJ Console RMX has two different set up (for Internal or External Mode):

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Hercules DJ Console RMX as Audio Sound Card.

AUDIO SETTINGS

INTERNAL MODE (Master + Headphones)

DJ ProMixer ASIO Hercules DJ 4Set

DJ ProMixer Audio Connections Hercules DJ Console RMX 2

For Internal Mode choose your output: 1.-  ¼ TSR connectors (balanced)  or 2.- RCA (unbalanced).

Connect your headphones in front ( ¼ TSR stereo connector).

EXTERNAL MODE (Deck A + Deck B connected to external mixer)

DJ ProMixer ASIO Hercules DJ 4Set Multi Channel External Mixer

DJ ProMixer Audio Connections Hercules DJ Console RMX 1

 

For External Mode choose your outputs: Deck 1.- (1) ¼ TSR connectors (balanced)  or (2).- RCA (unbalanced) Deck 2.-  (3) ¼ TSR connectors (balanced)  or (4).- RCA (unbalanced)

Important: Hercules DJ Console RMX is designed to be used as internal mode (with internal Sound Card using master output  & headphones) or external mode (using the internal soundcard for each deck).

MIDI SET UP

DJ ProMixer MIDI Hercules DJ Console RMX

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (HERCULES DJ CONSOLE RMX MID0) and select on the right side HERCULES DJ CONSOLE RMX.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

DJ ProMixer Hercules DJ Console RMX map

Overview

Detail

DJ ProMixer Hercules DJ Console RMX map detail

1.-   PLAY
2.-   PAUSE
3.-   CUE
4.-   SYNC
5.-   PITCH
6.-   BEND (BUTTONS)
7.-   1/2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
8.-   X2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
9.-   MANUAL LOOP: IN
10.- MANUAL LOOP: OUT / EXIT / RELOOP
11.- FX 1: ECHO
12.- FX 2: FLANGER

13.- MOVE WITH ACTIVE FUNCTION (CUE/LOOP MEMORY  OR ACTIVE AUTO LOOP)
14.- BEND (WHEEL)
15.- SCRATCH
16.- SCRATCH (BUTTON)
17.- CHANGE FOCUS TREE / TRACKLIST
18.- OPEN PLAYLIST

19.- TRACKLIST MOVE UP
20.- TRACKLIST MOVE DOWN
21.- LOAD DECK
22.- KILL (EQ. TREBLE)
23.- KILL (EQ. MID)
24.- KILL (EQ. BASS)
25.- PFL
26.- ROTARY KNOBS OF THE MIXER (EQ HI, MID,BASS)
27.- GAIN

28.- DECK´S VOLUMEN A / B
29.- SAMPLER VOLUMEN
30.- CROSSFADER

info mapping                    info PDF

Numark Mixtrack / Pro III

HOW TO SET UP?

The system must recognize your Numark Mixtrack / Pro III as Audio Device before configuring in DJ ProMixer.

AUDIO SETTINGS

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Mixtrack Pro III as Audio Sound Card.
Note: You do not need install additionals audio drivers, once connected is just plug and play.

DJ ProMixer Numark Mixtrack Pro 3 Audio

Connect your output in (1) RCA  connectors (L+R) for Master Output.

Connect your headphones in front ( ¼ TSR stereo connector).

Important: Numark Mixtrack Pro is designed to be used as internal mode (with internal Sound Card using master output  & headphones) or external mode (using the internal soundcard for each deck).

MIDI SET UP

DJ ProMixer Numark Mixtrack Pro 3 MIDI

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (MixTrack / Pro III) and select on the right side NUMARK MIXTRACK PRO III.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

Overview
DJ ProMixer Numark Mixtrack Pro III map
(Click to enlarge)

Detail

DJ ProMixer Numark Mixtrack Pro III map detail

 

1.-   PLAY / PAUSE
2.-   CUE
3.-   SYNC
4.-   SHIFT SELECTOR
5.-   ENABLE WHEEL VINYL MODE
6.-   NEEDLE SEARCH
7.-   BEND (BUTTONS)
8.-   PITCH
9.-   FX 1 (ECHO)
10.- FX 2 (FLANGER)
11.- FX 3 (WAH)
12.- FX DRY / WET
13.- (SHIFT +) FX PARAMETER
14.- PAD MODE SELECTOR
15.- PAD MODE SELECTOR + MANUAL LOOP PAD = ENABLE MANUAL LOOP
PAD 1 = LOOP IN / PAD 2 = LOOP OUT / PAD 3 = EXIT / RELOOP
16.- PAD MODE SELECTOR + AUTOLOOP = ENABLE AUTOLOOP
PAD 2 = 1/2 LOOP / PAD 3 = EXIT / RELOOP / PAD 4 = 2X LOOP
17.- PAD MODE SELECTOR + SAMPLER = ENABLE SAMPLER
PAD 1 = SAMPLE 1 / PAD 2 = SAMPLE 2 / PAD 3 = SAMPLE 3 / PAD 4 = SAMPLE 4
18.- CUE PAD: CUE 1 / CUE 2 / CUE 3 / CUE 4
19.- ROTARY KNOBS OF THE MIXER (HI, MID,BASS)
20.- DECK´S VOLUMEN CONTROLS AND CROSSFADER

21.- HEADPHONES VOLUMEN (A / B)
22.- PFL
23.- TRACKLIST SCROLL
24.- CHANGE FOCUS TREE / TRACKLIST
25.- (SHIFT + PUSH) OPEN PLAYLIST
26.- LOAD DECK A / B
27.- BEND (WHEEL)
28.- SCRATCH

PAD MODE DETAIL

DJ ProMixer MIDI Mixtrack 3 PAD mode detail

info mapping                    info PDF

Hercules DJ Console RMX 2

HOW TO SET UP?

The system must recognize your Hercules DJ Console RMX 2 as Audio and MIDI device before configuring in DJ ProMixer.

Hercules DJ Console RMX 2 only requires download and install Hercules ASIO Driver, once installed you can configure it in DJ ProMixer.

CONFIGURATION

Hercules DJ Console RMX 2 has two different set up (for Internal or External Mode):

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Hercules DJ Console RMX 2 as Audio Sound Card.

AUDIO SETTINGS

INTERNAL MODE (Master + Headphones)

DJ ProMixer ASIO Hercules DJ Console RMX 2_1

DJ ProMixer Hercules DJ Console RMX 2 Audio Connections_1

For Internal Mode choose your output: 1.-  ¼ TSR connectors (balanced)  or 2.- (Booth) RCA (unbalanced).

Connect your headphones in front ( ¼ TSR stereo connector).

EXTERNAL MODE (Deck A + Deck B connected to external mixer)

DJ ProMixer ASIO Hercules DJ Console RMX 2_2

DJ ProMixer Hercules DJ Console RMX 2 Audio Connections_2

For External Mode choose your outputs: Deck 1.- (1) ¼ TSR connectors (balanced)  or (2).-(Booth) RCA (unbalanced) Deck 2.-  (3).- RCA (unbalanced)

Important: Hercules DJ Console RMX 2 is designed to be used as internal mode (with internal Sound Card using master output  & headphones) or external mode (using the internal soundcard for each deck).

MIDI SET UP

DJ ProMixer MIDI Hercules DJ Console RMX 2

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (DJ CONSOLE RMX20) and select on the right side HERCULES DJ CONSOLE DJ CONSOLE RMX 2.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

Overview

DJ ProMixer Hercules DJ Console RMX 2 map

Detail

DJ ProMixer Hercules DJ Console RMX 2 map detail

1.-   PLAY / PAUSE
2.-   CUE
3.-   SYNC
4.-   PITCH
5.-   BEND (BUTTONS)
6.-   MODE SELECTOR: (7) MEMORY CUE/LOOP – (8) SAMPLER – (9) FX – (10) LOOP (AUTO/MANUAL
7.-   MEMORY CUE/LOOP SELECTED: PAD 1 – CUE/LOOP 1, PAD 2 – CUE/LOOP 2, PAD 3 – CUE-LOOP 3, PAD 4 – CUE-LOOP 4
8.-   SAMPLER SELECTED: PAD 1 – SAMPLE 1, PAD 2 – SAMPLE 2, PAD 3 – SAMPLE 3, PAD 4 – SAMPLE 4
9.-   FX SELECTED: PAD 1 – FX 1 (ECHO), PAD 2 – FX 2 (FLANGER), PAD 3 – FX 3 (WAH)
10.- LOOP SELECTED:

PAD 1 – 1/2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
PAD 2 – X2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
PAD 3 – MANUAL LOOP: IN
PAD 4 – MANUAL LOOP: OUT / EXIT / RELOOP
11.- MOVE WITH ACTIVE FUNCTION (CUE/LOOP MEMORY  OR ACTIVE AUTO LOOP)
12.- FX DRY / WET
13.- BEND (WHEEL
14.- SCRATCH
15.- KILL (EQ. TREBLE)
16.- KILL (EQ. MID)
17.- KILL (EQ. BASS)
18.- FOLDER-TREE SELECTOR / OPEN CLOSE
19
.- TRACKLIST SELECTOR
20.- TRACKLIST MOVE UP
21.- TRACKLIST MOVE DOWN

22.- LOAD DECK
23.- PFL
24.- VINYL MODE
25-  ROTARY KNOBS OF THE MIXER (EQ HI, MID,BASS), GAIN
26.- DECK´S VOLUMEN CONTROLS AND CROSSFADE

info mapping                    info PDF

Hercules DJ Console 4Mx

HOW TO SET UP?

The system must recognize your Hercules DJ Console 4 Mx as Audio and MIDI device before configuring in DJ ProMixer.

Hercules DJ Console 4 Mx only requires download and install Hercules ASIO Driver, once installed you can configure it in DJ ProMixer.

CONFIGURATION

Hercules DJ Console 4 Mx has two different set up (for Internal or External Mode):

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Hercules DJ Console 4 Mx as Audio Sound Card.

AUDIO SETTINGS

INTERNAL MODE (Master + Headphones)

DJ ProMixer ASIO Hercules DJ 4Set

 DJ ProMixer Hercules DJ Console 4 Mx Audio Connections 1

For Internal Mode choose your output: 1.-  ¼ TSR connectors (balanced)  or 2.- RCA (unbalanced).

Connect your headphones in front ( ¼ TSR stereo connector).

EXTERNAL MODE (Deck A + Deck B connected to external mixer)

DJ ProMixer ASIO Hercules DJ 4Set Multi Channel External Mixer

DJ ProMixer Hercules DJ Console 4 Mx Audio Connections 2

For External Mode choose your outputs: Deck 1.- (1) ¼ TSR connectors (balanced)  or (2).- RCA (unbalanced) Deck 2.-  (3) ¼ TSR connectors (balanced)  or (4).- RCA (unbalanced)

Important: Hercules DJ Console 4 Mx is designed to be used as internal mode (with internal Sound Card using master output  & headphones) or external mode (using the internal soundcard for each deck).

MIDI SET UP

DJ Promixer MIDI Hercules DJ Console 4 Mx

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (HERCULES DJ CONSOLE 4 MX MID0) and select on the right side HERCULES DJ CONSOLE 4 MX.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

Overview

DJ ProMixer Hercules DJ Console 4 Mx map

Detail

DJ ProMixer Hercules DJ Console 4 Mx map detail

 

1.-   PLAY / PAUSE
2.-   CUE
3.-   SYNC
4.-   PITCH
5.-   BEND (BUTTONS)
6.-   SHIFT SELECTOR
7.-   1/2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
7.-   (SHIFT ENABLED) MEMORY CUE / LOOP 1
8.-   X2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
8.-   (SHIFT ENABLED) MEMORY CUE / LOOP 2
9.-   MANUAL LOOP: IN
9.-   (SHIFT ENABLED) MEMORY CUE / LOOP 3
10.- MANUAL LOOP: OUT / EXIT / RELOOP
10.- (SHIFT ENABLED) MEMORY CUE / LOOP 4
11.- FX 1: ECHO
11.- (SHIFT ENABLED) SAMPLE 1
12.- FX 2: FLANGER
12.- (SHIFT ENABLED) SAMPLE 2
13.- MOVE WITH ACTIVE FUNCTION (CUE/LOOP MEMORY  OR ACTIVE AUTO LOOP)
14.- FX DRY / WET
15.- KEYLOCK
16.- CHANGE TEMPO RANGE (4%, 8%, 10%, 12%, 16%, 32%)
17.- BEND (WHEEL)
18.- SCRATCH
19.- FOLDER-TREE SELECTOR / OPEN CLOSE
20.- TRACKLIST SELECTOR
21.- TRACKLIST MOVE UP
22.- TRACKLIST MOVE DOWN

23.- LOAD DECK
24.- PFL
25.- KILL (EQ. TREBLE)
26.- KILL (EQ. MID)
27.- KILL (EQ. BASS)
28.- VINYL MODE
29-   ROTARY KNOBS OF THE MIXER (EQ HI, MID,BASS), GAIN
30.-  DECK´S VOLUMEN CONTROLS AND CROSSFADER

info mapping                    info PDF

Akiyama Quark / SC

HOW TO SET UP?

The system must recognize your Akiyama Quark as Audio Device (only Quark SC) and MIDI Device (for booth models) before configuring in DJ ProMixer.

CONFIGURATION

Akiyama Quark SC has two different audio set up (for Internal or External Mode):

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Akiyama Quark SC as Audio Sound Card.

AUDIO SETTINGS

INTERNAL MODE (Master + Headphones)

DJ ProMixer Audio Internal Akiyama Quark SC

 DJ ProMixer Akiyama Quark Audio Connections Internal

For Internal Mode connect your output in (1) RCA  connectors (L+R) for Master Output.

Connect your headphones in front ( ¼ TSR stereo connector).

EXTERNAL MODE (Deck A + Deck B connected to external mixer)

DJ ProMixer Audio External Akiyama Quark SC

DJ ProMixer Akiyama Quark Audio Connections External

For External Mode connect your outputs 1.- RCA  connectors (L+R) for Deck A, and  2.- RCA connectors (L+R) for Deck B.

Important: Akiyama Quark SC is designed to be used as internal mode (with internal Sound Card using master output  & headphones) or external mode (using the internal soundcard for each deck).

Akiyama Quark have not soundcard, it´s only MIDI Controller.

MIDI SET UP

DJ ProMixer MIDI Akiyama Quark SC

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (Quark0 / Quark SC0) and select on the right side AKIYAMA QUARK SC.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

Overview

DJ ProMixer Akiyama Quark map

(Click to enlarge)

Detail

DJ ProMixer Akiyama Quark map detail

1.-   PLAY / PAUSE
2.-   CUE
3.-   SYNC
4.-   MANUAL LOOP: IN / OUT / EXIT-RELOOP
5.-   AUTO LOOP FROM ¼ TO 32 BEATS (IN – STARTS 4 BEATS, EXIT, RELOOP)
6.-   MEMORIZE CUE / LOOP
7.-   FX DRY / WET
8.-   FX PARAMETER
9.-   FX ECHO SYNC (FROM 2/1 TO 1/8 BEATS)
10.- FX 1: ECHO
11.- FX 2: FLANGER
12.- FX 3: WAH
13.- VINYL MODE
14.- PITCH
15.- BEND (BUTTONS)
16.- MULTISELECTOR: NOTHING SELECTED (LIGHT OFF): MEMORY CUE / LOOP DIRECT BUTTONS (1, 2, 3, 4, 5, 6)
17.- MULTISELECTOR: 1 PUSH (ORANGE LIGHT) SAMPLER DIRECT BUTTONS (1, 2, 3, 4, 5, 6)
18.- MULTISELECTOR: SECOND PUSH (GREEN LIGHT) AUTO LOOP DIRECT BUTTONS (1/4, 1/2, 1, 2, 4, 8 BEATS)
19.- BEND (WHEEL)
20.- SCRATCH
21.- LOAD DECKS
22.- PFL
23.- CHANGE FOCUS TREE / TRACKLIST
24.- TRACKLIST SCROLL
25.- ROTARY KNOBS OF THE MIXER (EQ HI, MID,BASS +PUSH KILL), GAIN
26.- DECK´S VOLUMEN CONTROLS AND CROSSFADER

info mapping                    info PDF

Pioneer DDJ-SP 1 (MIDI – FX Module)

HOW TO SET UP?

The system must recognize your Pioneer DDJ-SP1 as MIDI device before configuring in DJ ProMixer.

IMPORTANT: Pioneer DDJ-SP1 is a MIDI Device have not integrated FX Processor or audio device/s. For audio configuration choose your work mode and audio sound card/s).

MIDI CONFIGURATION

 Whit 1 / 2 CDJ (HID) connected

1.- Connect normally your CDJ as HID device/s: HOW TO SET UP CDJs WITH HID?
2.- Connect your Pioneer DDJ-SP1 as MIDI device

DJ ProMixer MIDI Pioneer DDJ-SP1

Select in MIDI PORT / MIDI MAP 1 on the left side  (Pioneer DDJ-SP10) and select on the right side PIONEER DDJ-SP1.XML. Nothing selected in MIDI PORT / MIDI MAP 2. Nothing selected in MIDI PORT / MIDI MAP 2

Whit other MIDI device

1.- Pioneer DDJ-SP1 Accept only one more MIDI device.
2.- MIDI Single mode (2 devices) + Pioneer DDJ-SP1: Not supported

DJ ProMixer MIDI Pioneer DDJ-SP1_3

 

Select in MIDI PORT / MIDI MAP 1 Your compatible MIDI device .Select in MIDI PORT / MIDI MAP 2 on the left side  (Pioneer DDJ-SP1 0/I*) and select on the right side PIONEER DDJ-SP1.XML.
* (0/I)  It depends what is the first device recognized by the System.

MIDI MAP
(Overview)

DJ ProMixer Pioneer DDJ-SP1 map

Detail

DJ ProMixer Pioneer DDJ-SP1 map detail

  1.- FX DRY / WET
  2.- FX PARAMETER
  3.- FX ECHO SYNC (FROM 2/1 TO 1/8 BEATS)
  4.- FX 1 (ECHO)
  5.- FX 2 (FLANGER)
  6.- FX 3 (WAH)
  7.- SYNC
  8.- BRAKE
  9.- REVERSE
10.- MEMORY CUE / LOOP
11.- DEL CUE / LOOP

12.- SCROLL: AUTO LOOP (IN – STARTS 4 BEATS, EXIT, RELOOP) / PUSH: EXIT LOOP / RELOOP
13.- TRACKLIST SCROLL
14.- CHANGE FOCUS TREE / TRACKLIST
15.- CHANGE FOCUS PLAYLIST / GROUPS-SUBGROUPS / EXPLORER

16.- LOAD DECK
17.- SAMPLER VOLUMEN
18.- MEMORY CUE / LOOP SELECTOR (HOT CUE SELECTOR)
19.- AUTOLOOP (FROM 1/4 TO 32 BEATS) (ROLL SELECTOR)
20.- SAMPLER (SAMPLER SELECTOR) 

info mapping                    info PDF

American Audio VMS 4.1

HOW TO SET UP?

The system must to recognize your American Audio VMS 4.1 as Audio and MIDI device before configuring in DJ ProMixer.

CONFIGURE YOUR AUDIO SETTINGS

American Audio VMS 4.1 only requires download and install ADJ Asio Driver.

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your American Audio VMS  4.1 as Audio Sound Card.

DJ ProMixer American Audio VMS 41 ASIO

DJ ProMixer American Audio VMS 41 Audio Connection

For Internal Mode choose your output: 1.- for XLR connectors (balanced)  or 2.- for RCA (unbalanced).

Important: American Audio VMS 4.1 is designed to be used in internal mode (with internal Sound Card), but you can use also with DJ ProMixer in external mode (with other/s Sound Card/s and external mixer).

American Audio VMS 4.1 has two different MIDI maps:
1.- (Mode 1) (Using touchpads)
2.- (Mode 2) (Without touchpads)

MIDI CONFIGURATION

Mode 1

DJ ProMixer American Audio VMS 41 MID Map 1

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (VMS410) and select on the right side AMERICAN AUDIO VMS4-1.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP 1 (Overview)

DJ ProMixer American Audio VMS 41 map1

Detail

DJ PorMixer American Audio VMS 41 map1_detail

1.-   PLAY
2.-   PAUSE

3.-   CUE
4.-   SYNC
5.-   (SHIFT +) CHANGE TEMPO RANGE (4%, 8%, 10%, 12%, 16%, 32%)
6.-   BEND (BUTTONS)
7.-   FX PARAMETER

8.-   FX DRY / WET
9.-   FX ECHO SYNC (FROM 2/1 TO 1/8 BEATS)
10.- FX 1 (ECHO)
11.- FX 2 (FLANGER)
12.- FX 3 (WAH)
13.- MANUAL LOOP IN
14.- MANUAL LOOP OUT / EXIT / RELOOP
15.- AUTOLOOP FROM ¼ TO 32 BEATS (STARTS
IN 4 BEATS) 1/2
16.- AUTOLOOP FROM ¼ TO 32 BEATS (STARTS
IN 4 BEATS) X 2 BROWSER (PLAYLIST, GROUPS, EXPLORER), OPEN CLOSE FOLDERS

17.- SHIFT
18.- ENABLE VINYL MODE
19.- (SHIFT +) KEYLOCK
20.- MOVE WITH ACTIVE FUNCTION (CUE/LOOP MEMORY  OR ACTIVE AUTO LOOP)
21.- MEMORY CUE / LOOP (1, 2, 3, 4)
22.- (SHIFT +) SAMPLES (1, 2, 3, 4)
23.- PITCH
24.- TOUCHPAD: TREE SCROLL
25.- SHIFT + TOUCHPAD: TRACKLIST SCROLL
26.- BEND (WHEEL)
27.- SCRATCH
28.- (SHIFT +) LOAD DECK
29.- (SHIFT +) TOUCHPAD: MOUSE
30.- PFL
31.- ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS)
32.- DECK´S VOLUMEN CONTROLS AND CROSSFADER

Mode 2

DJ ProMixer American Audio VMS 41 MID Map 2

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (VMS410) and select on the right side AMERICAN AUDIO VMS4-1 V2.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP 2 (Overview)

DJ ProMixer American Audio VMS 41 map2

Detail

DJ ProMixer American Audio VMS 41 map2_detail

1.-   PLAY
2.-   PAUSE
3.-   CUE
4.-   SYNC
5.-   (SHIFT +) CHANGE TEMPO RANGE (4%, 8%, 10%, 12%, 16%, 32%)
6.-   BEND (BUTTONS)
7.-   TRACKLIST SCROLL 

8.-   (SHIFT +) TREE SCROLL
9.-   FX DRY / WET
10.- FX PARAMETER
11.- FX ECHO SYNC (FROM 2/1 TO 1/8 BEATS)
12.- LOAD DECK FX 3 (WAH)
13.- FX 1 (ECHO)
14.- FX 2 (FLANGER)
15.- FX 3 (WAH)
16.- MANUAL LOOP IN
17.- MANUAL LOOP OUT / EXIT / RELOOP
18.- AUTOLOOP FROM ¼ TO 32 BEATS (STARTS
IN 4 BEATS) 1/2
19.- AUTOLOOP FROM ¼ TO 32 BEATS (STARTS
IN 4 BEATS) X 2 BROWSER (PLAYLIST, GROUPS, EXPLORER), OPEN CLOSE FOLDERS

20.- SHIFT
21.- MEMORY CUE / LOOP (1, 2, 3, 4)
22.- (SHIFT +) SAMPLES (1, 2, 3, 4)
23.- PITCH
24.- ENABLE VINYL MODE
25.- (SHIFT +) KEYLOCK

26.- BEND (WHEEL)
27.- SCRATCH
28.- MOVE WITH ACTIVE FUNCTION (CUE/LOOP MEMORY  OR ACTIVE AUTO LOOP)
29.- ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS)
30.- PFL
31.- DECK´S VOLUMEN CONTROLS AND CROSSFADER

info mapping                    info PDF

Akai AFX

HOW TO SET UP?

The system must recognize your Akai AFX device before configuring in DJ ProMixer.
IMPORTANT: Akai AFX is a MIDI Device (It has not integrated audio device/s) For audio configuration choose your work mode and audio sound card/s).

Akai AFX has two different MIDI map:
1.- Controller Mode (Mode 1)
2.- FX Module (Mode 2)

MIDI CONFIGURATION

1.- Controller Mode (Mode 1)

 DJ ProMixer MIDI Akai AFX_1

Main controls as Controller – secundary controls as FX Module

Select in MIDI PORT / MIDI MAP 1 on the left side one device (Akai Pro AFX 0) and select on the right side AKAI AFXMODE1.XML. Nothing selected in MIDI PORT / MIDI MAP 2.

2.- FX Module (Mode 2)

DJ ProMixer MIDI Akai AFX_2

Main controls as FX Module – secundary controls as Controller

Select in MIDI PORT / MIDI MAP 1 on the left side one device (Akai Pro AFX 0) and select on the right side AKAI AFXMODE2.XML. Nothing selected in MIDI PORT / MIDI MAP 2.

HOW TO SET UP Akai AMX with Akai AFX?

DJ ProMixer Akai AMX AFX

Important: Akai AFX Mode 2 (FX Module) is recommended to use with Akai AMX, but it can be used also with Akai AFX Mode 1 (Controller)

DJ ProMixer MIDI Akai AFX and AMX

Select in MIDI PORT / MIDI MAP 1 on the left side one device (AMX MID 0/I*) and select on the right side AKAI AMX.XML. Select in MIDI PORT / MIDI MAP 2 on the left side the other device (Akai Pro AFX 0/I*) and select on the right side AKAI AFXMODE2.XML

* (0 / I)  It depends what is the first device recognized by the System

Select your AMX Device in Audio Set Up as Audio Device:
How to set up Akai ASIO AMX?

TWO MIDI MAPS

DJ ProMixer Akai AFX map

1.-   FX 1: ECHO 
2.-   FX 2: FLANGER

3.-   FX 3: WAH

4.-   PFL

5.-   REVERSE 

6.-   BRAKE
7.-   CHANGE FOCUS TREE / TRACKLIST

8.-   SCROLL / LOAD / ENTER
9.-   DECK SELECTOR (DECK A / DECK B)
10.- TACTILE SENSOR (SEARCH, PITCH, SCRATCH) 
11.- SEARCH MODE (TACTILE SENSOR)
12.- PITCH MODE (TACTILE SENSOR)
13.- SCRATCH MODE (TACTILE SENSOR)
14.- CHANGE FOCUS PLAYLIST / GROUPS-SUBGROUPS / EXPLORER

MIDI MAP MODE 1 (CONTROLLER)
15.- EQ. HIGH – (SHIFT +) FX DRY / WET
16.- EQ. MID – (SHIFT +) FX PARAMETER
17.- EQ. BASS – (SHIFT +) FX ECHO BEAT SYNC (FROM 2/1 TO 1/8 BEATS)
18.- DECK VOLUMEN – (SHIFT +) SAMPLER VOLUMEN

MIDI MAP MODE 2 (FX MODULE)
15.- FX DRY / WET – (SHIFT +) EQ. HIGH
16.- FX PARAMETER – (SHIFT +) EQ. MID
17.- FX ECHO BEAT SYNC (FROM 2/1 TO 1/8 BEATS) – (SHIFT +) EQ. BASS
18.- SAMPLER VOLUMEN – (SHIFT +) DECK VOLUMEN

PAD MODE DETAIL 

19.- CUE / LOOP MEMORY (1, 2, 3, 4, 5, 6), MEMORIZE, DELETE

DJ ProMixer Akai AFX PAD Detail map CUE
20.- AUTOLOOP FROM ¼ TO 32 BEATS

DJ ProMixer Akai AFX PAD Detail map AUTOLOOP
21.- MANUAL LOOP (IN – OUT – EXIT / RELOOP), PLAY/PAUSE, CUE, SYNC

DJ ProMixer Akai AFX PAD Detail map MANUAL LOOP
22.- SAMPLER (SAMPLES 1, 2, 3, 4, 5, 6) STOP
 

DJ ProMixer Akai AFX PAD Detail map SAMPLER

info mapping                    info PDF

Numark Mixtrack Edge

HOW TO SET UP? The system must recognize your Numark Mixtrack Edge as Audio and MIDI Device before configuring in DJ ProMixer.

AUDIO SETTINGS

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Numark Mixtrack Edge as Audio Sound Card. Note: You do not need install additionals audio drivers, once connected is just plug and play. DJ ProMixer Audio Mixtrack Edge Connect your output  (1/8 TSR stereo connector) in Master Output. Connect your headphones in  1/8 TSR headphones stereo connector.

MIDI SET UP

DJ ProMixer MIDI Mixtrack Edge In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (MixTrack Edge) and select on the right side NUMARK MIXTRACK EDGE.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

Overview DJ ProMixer Mixtrack-Edge map (Click to enlarge)

Detail

DJ ProMixer Mixtrack-Edge map_detail 1.-    PLAY / PAUSE
2.-    CUE
3.-    SYNC
4.-    (SHIFT +) KEYLOCK
5.-    SHIFT SELECTOR
6.-    FX SELECTOR
7.-    CUE / LOOP MEMORY
8.-    SAMPLES (1,2,3)
9.-    (FX SELECTOR +) FX 1, FX 2, FX 3
10.-  MANUAL LOOP (LOOP IN / OUT / EXIT-RELOOP)
11.-  (SHIFT +) AUTO LOOP (IN 4 BEATS): 1/2 , X2, EXIT-RELOOP
12.-  CHANGE FOCUS TREE / TRACKLIST
13.-  ENTER / PUSH
14.-  HEADPHONES VOLUMEN (A AND B)
15.-  EQ. TREBLE
16.-  EQ. BASS
17.-  (FX SELECTOR) FX DRY / WET
18.-  (FX SELECTOR) FX PARAMETER
19.-  WHEEL: BEND
20.-  WHEEL: SCRATCH / (FX SELECTOR) SCRATCH
21.-  WHEEL: MOVE UP / DOWN PITCH
22.-  WHEEL: SEARCH MODE
23.-  PFL
24.-  LOAD DECK
25.-  WHEEL
26.-  DECK´S VOLUMEN CONTROLS AND CROSSFADER

info mapping                    info PDF

Numark NDX 500

HOW TO SET UP?

The system must recognize your Numark NDX-500 device/s before configuring in DJ ProMixer.
IMPORTANT: Numark NDX-500 is a MIDI and audio sound card device

MIDI CONFIGURATION

Single Mode (2 Numark NDX-500 Connected)

DJ ProMixer Single Numark NDX 500

Select in MIDI PORT / MIDI MAP 1 on the left side one device (Numark NDX500 0) and select on the right side NUMARK NDX-500(SINGLE A).XML. Select in MIDI PORT / MIDI MAP 2 on the left side the other device (Numark NDX500 I) and select on the right side NUMARK NDX-500(SINGLE B).XML

Dual Mode

DJ ProMixer Dual Numark NDX 500

Select in MIDI PORT / MIDI MAP 1 on the left side Numark NDX500 0, and select on the right side NUMARK NDX-500 (A AND B).XML. Nothing selected in MIDI PORT / MIDI MAP 2 How to change the decks? Two ways: 1.- Hardware: Use the “Single Button”. 2.- Software: By clicking the headphone button of the deck.

AUDIO CONFIGURATION

Open DJ ProMixer and go to “Config”, open “Audio Setup”, here you can select your Numark NDX-500 as Audio Sound Card.

DJ ProMixer Audio Numark NDX 500

MIDI MAP

DJ ProMixer Numark NDX 500 Map

1.-   PLAY / PAUSE
2.-   CUE
 
3.-   SYNC
 
4.-   SCROLL / LOAD / ENTER
5.-   CHANGE FOCUS TREE / TRACKLIST
6.-   MANUAL LOOP (IN – OUT – EXIT / RELOOP)
7.-   CUE / LOOP MEMORY (1, 2, 3) 

8.-   MEMORIZE CUE / LOOP
9.-   BRAKE
10.- REVERSE
11.- SCRATCH MODE (WHEEL)
12.- SEARCH MODE (WHEEL)
13.- DECK SELECTOR (DECK A / DECK B) (ONLY DUAL MODE)
14.- CHANGE FOCUS PLAYLIST / GROUPS-SUBGROUPS / EXPLORER 
15.- PITCH

16.- PITCH BEND
17.- PITCH
18.- BEND (BUTTONS)
19.- BEND (WHEEL)
20.- WHEEL
21.- LINK TO PC (SOURCE)

info mapping                    info PDF

Synq DMC-2000

HOW TO SET UP?

The system must recognize your Synq DMC-2000 as Audio and MIDI device before configuring in DJ ProMixer.

AUDIO AND MIDI SETTINGS

——————————————————————————————————————– IMPORTANT: Install the drivers provided for the manufacturer and check this configuration to install your device
——————————————————————————————————————–

MIDI MAP
Overview

DJ ProMixer Synq DMC-2000_map

Detail

DJ ProMixer Synq DMC-2000_map_detail_1

1.-     PLAY / PAUSE
2.-     CUE
3.-     AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS) IN  EXIT / RELOOP IN
4.-    TRACK SCROLL / PUSH (LOAD)
5.-    FOLDER SCROLL / PUSH (OPEN-CLOSE)
6.-    CUE LOOP MEMORY (1 TO 4) (NORMAL MODE) / SAMPLES (1 TO 4) (SAMPLE BUTTON ACTIVATED)
7.-    MEMORIZE CUE / LOOP POINT
8.-    DELETE CUE /LOOP POINT
9.-    ENABLE SAMPLER (HOLD BUTTON) (SAMPLES 1,2,3,4)
10.-  FX ECHO
11.-  FX FLANGER
12.-  FX WAH
13.-  REVERSE
14.-  BRAKE
15.-  WHEEL MODE: FX PARAMETER
16.-  WHEEL MODE: VINYL
17.-  WHEEL MODE: SEARCH
18.-  PFL
19-  CHANGE TEMPO RANGE (4%, 8%, 10%, 12%, 16%, 32%)
20-  KEYLOCK
21-  MOVE WITH ACTIVE FUNCTION (CUE/LOOP MEMORY  OR ACTIVE AUTO LOOP)
22-  PITCH
23.- BEND (BUTTONS)
24.- BEND (WHEEL)
25.- SCRATCH
26.- SYNC
27.- ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS)
28.- DECK´S VOLUMEN CONTROLS AND CROSSFADER

info mapping                    info PDF

Synq DMC-1000

HOW TO SET UP?

The system must recognize your Synq DMC-1000 as MIDI Device before configuring in DJ ProMixer.

MIDI SETTINGS

——————————————————————————————————————-
IMPORTANT: Install the drivers provided for the manufacturer and check this configuration to install your device
——————————————————————————————————————–

MIDI MAP

 DJ ProMixer Synq dmc-1000_map

1.- PLAY / PAUSE
  2.- CUE
  3.- CUP (CUE & PLAY)
  4.- CHANGE FOCUS PLAYLIST / GROUPS-SUBGROUPS / EXPLORER
  5.- TRACK SCROLL / PUSH (LOAD)
  6.- FOLDER SCROLL / PUSH (OPEN-CLOSE)
  7.- REVERSE
  8.- MANUAL LOOP (IN – OUT – EXIT / RELOOP)
DIRECT AUTO LOOP (IN / EXIT) (STARTS IN 4 BEATS)

  9.- AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
10.- SELECTOR AUTOLOOP (FROM ¼ TO 32 BEATS) / FX ECHO BEAT SYNC (FROM 1/8 TO 2/1) 
11.- SELECTOR AUTOLOOP / FX BEAT << MOVE DOWN / MOVE UP>>
12.- WHEEL MODE (SCRATCH, SEARCH, FX)
13.- CHANGE TEMPO RANGE (4%, 8%, 10%, 12%, 16%, 32%)
14.- KEYLOCK (BY DEFAULT DISABLED)
15.- PITCH

16.- PITCH BEND
17.- SYNC
18.- MEMORIZE CUE / LOOP POINT
19.- DELETE CUE /LOOP POINT

20.- SAMPLE MODE ACTIVATED
21.- CUE LOOP MEMORY (1 TO 4) (NORMAL MODE) / SAMPLES (1 TO 4) (SAMPLE BUTTON ACTIVATED)
22.- BEND (WHEEL)
23.- SCRATCH (WHEEL)
24.- EFFECTS (ECHO, FLANGER, WAH)
25.- DECK SELECTOR (DECK A / DECK B)
26.-
LINK TO PC

info mapping                    info PDF

Zomo MC-1000

HOW TO SET UP?

The system must recognize your Zomo MC-1000 as Audio Device and MIDI Device  before configuring in DJ ProMixer.

AUDIO SETTINGS

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Zomo MC-1000 as Audio Sound Card.
Note: You do not need install additionals audio drivers, once connected is just plug and play.

DJ ProMixer Audio Zomo MC - 1000

Connect your output in RCA  connectors for Channels 1+2 (Deck A) and 3+4 (Deck B).

DJ ProMixer Zomo Audio Output

MIDI SET UP

Important: Select “C1” in MIDI Selector

Zomo C1 MIDI Selector

DJ ProMixer MIDI Zomo MC - 1000

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (MC-1000) and select on the right side ZOMO MC-1000.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

Overview
DJ ProMixer Zomo MC-1000_map
(Click to enlarge)

Detail

DJ ProMixer Zomo MC-1000_map_detail

1.-   PLAY / PAUSE
2.-   CUE 1, CUE 2, CUE 3
2.-   (SHIFT) CUE 4, MEMO, DEL
3.-   SYNC
4.-   SHIFT SELECTOR
5.-   AUTO LOOP (IN 4 BEAT) IN / OUT / EXIT / RELOOP
6.-   PITCH
7.-   DECK VOLUMEN
8.-   BEND
9.-   FX DRY / WET
9.-   (SHIFT) EQ BASS
10.- FX PARAMETER
10.- (SHIFT) EQ MID
11.- FX ECHO BEAT SYNC (FROM 2/1 TO 1/8 BEATS)
11.- (SHIFT) EQ HI
12.- (SHIFT) GAIN
13.- FX 1 (ECHO)
13.- (SHIFT) SAMPLE 1
14.- FX 2 (FLANGER)
14.- (SHIFT) SAMPLE 2
15.- FX 3 (WAH)
15.- (SHIFT) SAMPLE 3
16.- PFL
16.- (SHIFT) SAMPLE 4
17.- SCROLL
18.- CHANGE FOCUS TREE / TRACKLIST
19.- CHANGE FOCUS PLAYLIST / GROUPS-SUBGROUPS / EXPLORER
20.- LOAD 

info mapping                    info PDF

ION iCUE

HOW TO SET UP?

The system must recognize your ION ICUE before configuring in DJ ProMixer.

IMPORTANT: ION ICUE is a MIDI Device (It has not integrated audio device/s) For audio configuration choose your work mode and audio sound card/s).

 MIDI SET UP

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (Ion ICUE Mid0) and select on the right side ION ICUE.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI Ion ICUE

MIDI MAP
Overview

DJ ProMixer ION ICUEl MIDI map

Detail

DJ ProMixer ION ICUEl MIDI map detail

1.-   PLAY
2.-   PAUSE
3.-   CUE
4.-   PITCH
5.-   SYNC
6.-   KEYLOCK
7.-   SCRATCH
8.-   PFL VOLUMEN (A AND B)
9.-   ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS)
10.- VOLUMEN CONTROLS AND CROSSFADER
11.- VOLUMEN CONTROLS AND CROSSFADER
12.- WHEELS

info mapping                    info PDF

Numark Total Control

HOW TO SET UP?

The system must recognize your Numark Total Control before configuring in DJ ProMixer.
IMPORTANT: Numark Total Control is a MIDI Device (have not integrated audio device/s) For audio configuration choose your work mode and audio sound card/s).

MIDI CONFIGURATION

DJ ProMixer Numark Total Control MIDI

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (Numark TOTAL CONTROL MIDI0) and select on the right side NUMARK TOTAL CONTROL.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

TWO MIDI MAPS

Overview

Numark Total Control MIDI map

Detail

DJ ProMixer Numark Total Control MIDI map detail

1.-   PLAY
2.-   PAUSE
3.-   CUE
4.-   PITCH
5.-   SYNC
6.-   KEYLOCK
7.-   PFL
8.-   MANUAL LOOP (1.- IN  2.- OUT / EXIT / RELOOP)
9.-   PITCH BEND
10.- CHANGE FOCUS TREE / TRACKLIST
11.- SCROLL / LOAD / ENTER
12.- LOAD TRACK
13.- FX DRY / WET
14.- FX PARAMETER
15.- MID MAP 1 AND MIDI MAP 2 – FX – ECHO
16.- MIDI MAP 1 – SCRATCH / MIDI MAP 2 – FX – FLANGER
17.- MIDI MAP 1  FX FLANGER / MIDI MAP 2 – SAMPLER 1
18.- MIDI MAP 1 FX WAH / MIDI MAP 2 – SAMPLER 2
19.- FX ECHO BEAT SYNC
20.- SAMPLER VOLUMEN
21.- PFL VOLUMEN (A AND B)
22.- ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS) / KILL = PUSH (HI, MID, BASS)
23.- VOLUMEN CONTROLS AND CROSSFADER
24.- WHEELS

info mapping                    info PDF

Numark Stealth Control

HOW TO SET UP?

The system must recognize your Numark Stealth Control before configuring in DJ ProMixer.
IMPORTANT: Numark Stealth Control is a MIDI Device (It has not integrated audio device/s) For audio configuration choose your work mode and audio sound card/s).

MIDI CONFIGURATION

DJ ProMixer Numark Stealth Control MIDI

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (Numark OMNI CONTROL MIDI0) and select on the right side NUMARK OMNI CONTROL.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

TWO MIDI MAPS

Overview

DJ ProMixer Numark Stealth Control MIDI map

Detail

Numark Stealth Control MIDI map detail

1.-   PLAY
2.-   PAUSE
3.-   CUE
4.-   PITCH
5.-   SYNC
6.-   KEYLOCK
7.-   PFL
8.-   MANUAL LOOP (1.- IN  2.- OUT / EXIT / RELOOP)
9.-   PITCH BEND
10.- CHANGE FOCUS TREE / TRACKLIST
11.- SCROLL / LOAD / ENTER
12.- LOAD TRACK
13.- FX DRY / WET
14.- FX PARAMETER
15.- MID MAP 1 AND MIDI MAP 2 – FX – ECHO
16.- MIDI MAP 1 – SCRATCH / MIDI MAP 2 – FX – FLANGER
17.- MIDI MAP 1  FX FLANGER / MIDI MAP 2 – SAMPLER 1
18.- MIDI MAP 1 FX WAH / MIDI MAP 2 – SAMPLER 2
19.- FX ECHO BEAT SYNC
20.- SAMPLER VOLUMEN
21.- PFL VOLUMEN (A AND B)
22.- ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS) / KILL = PUSH (HI, MID, BASS)
23.- VOLUMEN CONTROLS AND CROSSFADER
24.- WHEELS

info mapping                    info PDF

Citronic MP-X10

HOW TO SET UP?

The system must recognize your Citronic MPCD-X3 as Audio and MIDI device before configuring in DJ ProMixer.

AUDIO AND MIDI SETTINGS

——————————————————————————————————————– IMPORTANT: Install the drivers provided for the manufacturer and check this configuration to install your device
——————————————————————————————————————–

MIDI MAP
Overview

DJ ProMixer Citronic-mp-x10 map

Detail

DJ ProMixer Citronic-mp-x10 map detail

1.-     PLAY / PAUSE
2.-     CUE
3.-     AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS) IN  EXIT / RELOOP IN
4.-    TRACK SCROLL / PUSH (LOAD)
5.-    FOLDER SCROLL / PUSH (OPEN-CLOSE)
6.-    CUE LOOP MEMORY (1 TO 4) (NORMAL MODE) / SAMPLES (1 TO 4) (SAMPLE BUTTON ACTIVATED)
7.-    MEMORIZE CUE / LOOP POINT
8.-    DELETE CUE /LOOP POINT
9.-    ENABLE SAMPLER (HOLD BUTTON) (SAMPLES 1,2,3,4)
10.-  FX ECHO
11.-  FX FLANGER
12.-  FX WAH
13.-  REVERSE
14.-  BRAKE
15.-  WHEEL MODE: FX PARAMETER
16.-  WHEEL MODE: VINYL
17.-  WHEEL MODE: SEARCH
18.-  PFL
19-  CHANGE TEMPO RANGE (4%, 8%, 10%, 12%, 16%, 32%)
20-  KEYLOCK
21-  MOVE WITH ACTIVE FUNCTION (CUE/LOOP MEMORY  OR ACTIVE AUTO LOOP)
22-  PITCH
23.- BEND (BUTTONS)
24.- BEND (WHEEL)
25.- SCRATCH
26.- SYNC
27.- ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS)
28.- DECK´S VOLUMEN CONTROLS AND CROSSFADER

info mapping                    info PDF

American Audio Versadeck

HOW TO SET UP?

The system must recognize your American audio Versadeck as Audio and MIDI device before configuring in DJ ProMixer.

AUDIO AND MIDI SETTINGS

——————————————————————————————————————– IMPORTANT: Install the drivers provided for the manufacturer and check this configuration to install your device
——————————————————————————————————————–

MIDI MAP
Overview

DJ ProMixer American Audio Versadeck map

Detail

DJ ProMixer American Audio Versadeck map detail

1.-     PLAY / PAUSE
2.-     CUE
3.-     AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS) IN  EXIT / RELOOP IN
4.-    TRACK SCROLL / PUSH (LOAD)
5.-    FOLDER SCROLL / PUSH (OPEN-CLOSE)
6.-    CUE LOOP MEMORY (1 TO 4) (NORMAL MODE) / SAMPLES (1 TO 4) (SAMPLE BUTTON ACTIVATED)
7.-    MEMORIZE CUE / LOOP POINT
8.-    DELETE CUE /LOOP POINT
9.-    ENABLE SAMPLER (HOLD BUTTON) (SAMPLES 1,2,3,4)
10.-  FX ECHO
11.-  FX FLANGER
12.-  FX WAH
13.-  REVERSE
14.-  BRAKE
15.-  WHEEL MODE: FX PARAMETER
16.-  WHEEL MODE: VINYL
17.-  WHEEL MODE: SEARCH
18.-  PFL
19-  CHANGE TEMPO RANGE (4%, 8%, 10%, 12%, 16%, 32%)
20-  KEYLOCK
21-  MOVE WITH ACTIVE FUNCTION (CUE/LOOP MEMORY  OR ACTIVE AUTO LOOP)
22-  PITCH
23.- BEND (BUTTONS)
24.- BEND (WHEEL)
25.- SCRATCH
26.- SYNC
27.- ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS)
28.- DECK´S VOLUMEN CONTROLS AND CROSSFADER

info mapping                    info PDF

Denon SC 2000

HOW TO SET UP?

The system must recognize your Denon SC-2000 device before configuring in DJ ProMixer.

IMPORTANT: Denon SC 2000 has not integrated audio device/s. For audio configuration choose your work mode and audio sound card/s.

MIDI CONFIGURATION

Single Mode (2 Denon SC 2000 Connected)

DJ ProMixer Denon SC 2000 MIDI single

 

Select in MIDI PORT / MIDI MAP 1 on the left side one device (DN-SC20000) and select on the right side DENON SC 2000 SINGLEA.XML. Select in MIDI PORT / MIDI MAP 2 on the left side the other device (DN-SC20001) and select on the right side DENON SC 2000 SINGLEB.XML

Dual Mode

DJ ProMixer Denon SC 2000  MIDI dual

 

Select in MIDI PORT / MIDI MAP 1 on the left side your Denon SC 2000 (DN-SC20000) and select on the right side DENON SC 2000 (A AND B).XML. Nothing selected in MIDI PORT / MIDI MAP 2

How to change the decks? Denon SC-2000 has a specific button to select the deck.

DJ ProMixer Change Deck Denon SC 2000

 

 

MIDI MAP

DJ ProMixer Denon SC 2000 map

 

  1.- PLAY / PAUSE
  2.- CUE
  3.- SAMPLER SELECTOR: OFF (CUE / LOOP MEMORY: 1,2,3,4) – ON (SAMPLER:1,2,3,4)
  4.- CUE LOOP MEMORY (1,2,3,4) DIRECT BUTTONS (SELECTOR OFF)
  5.- SAMPLER (1,2,3,4) DIRECT BUTTONS (SELECTOR ON)
  6.- MANUAL LOOP (LOOP IN – IN / LOOP OUT – OUT, EXIT, RELOOP)
  7.- AUTO LOOP (IN – STARTS 4 BEATS, EXIT, RELOOP)
  8.- MOVE DOWN (-) / MOVE UP (+) AUTO LOOP
DIRECT AUTO LOOP (IN / EXIT) (STARTS IN 4 BEATS)

  9.- CHANGE DECK (ONLY DUAL MODE) BLUE COLOR: DECK A, RED COLOR:DECK B
10.- TRACK SCROLL / PUSH (LOAD) 
11.- SELECTOR AUTOLOOP / FX BEAT << MOVE DOWN / MOVE UP>>
12.- CHANGE FOCUS PLAYLIST / GROUPS-SUBGROUPS / EXPLORER
13.- FOLDER (OPEN-CLOSE)
14.- FX DRY / WET
15.- FX ECHO BEAT SYNC (FROM 2/1 TO 1/8 BEATS)

16.- PITCH BEND
17.- FX (ECHO)
18.- FX (FLANGER)
19.- KEYLOCK

20.- SYNC
21.- BEND (BUTTONS)
22.- BEND (WHEEL)
23.- SCRATCH (WHEEL)
24.- PITCH
25.- MEMORIZE CUE / LOOP POINT
26.- MOVE WITH ACTIVE FUNCTION (CUE/LOOP MEMORY  OR ACTIVE AUTO LOOP)

info mapping                    info PDF

 

Numark Mixtrack Quad

HOW TO SET UP?

The system must recognize your Numark Mixtrack Quad as Audio and MIDI device before configuring in DJ ProMixer.

AUDIO SETTINGS

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Mixtrack Quad as Audio Sound Card.
Note: You do not need install additionals audio drivers, once connected is just plug and play.

DJ ProMixer Audio Mixtrack Pro II

Connect your output in (1) RCA  connectors (L+R) for Master Output.

Connect your headphones in front ( ¼ TSR stereo connector).

Important: Numark Mixtrack Quad is designed to be used as internal mode (with internal Sound Card using master output  & headphones) or external mode (using the internal soundcard for each deck).

MIDI SET UP

DJ ProMixer MIDI Mixtrack 2

 

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (MixTrack Quad) and select on the right side NUMARK MIXTRACK QUAD.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

Overview
DJ ProMixer Mixtrack Quad map
(Click to enlarge)

Detail

DJ ProMixer Mixtrack Quad map detail

 

1.-   PLAY / PAUSE
2.-   CUE
3.-   SYNC
4.-   CHANGE FOCUS THREE / TRACKLIST (SHIFT SELECTOR)
5.-   SHIFT + PAD 5 = LOOP SELECTION (AUTO AND MANUAL)
6.-   SHIFT + PAD 6 = SAMPLES SELECTION (1,2,3,4)
7.-   SHIFT + PAD 7 = CUE / LOOP MEMORY SELECTION (1,2,3,4)
8.-   BEND (BUTTONS)
9.-   FX DRY / WET
10.- FX PARAMETER
11.- FX SYNC (FROM 2/1 TO 1/8 BEATS)
12.- SAMPLER VOLUMEN
13.- FX 1, FX 2, FX 3
14.- AUTO LOOP X2
15.- LOAD DECK
16.- CROSSFADER
17.- PFL
18.-TRACKLIST SCROLL
19.- ROTARY KNOBS OF THE MIXER (HI, MID,BASS)
20.- DECK´S VOLUMEN CONTROLS
21.- BEND (WHEEL)
22.- SCRATCH
23.- ENABLE WHEEL VINYL MODE
24.- PITCH

25.- HEADPHONES VOLUMEN (A AND B)

info mapping                    info PDF

Numark Mixtrack / Pro II

HOW TO SET UP?

The system must recognize your Numark Mixtrack / Pro II as Audio Device (only Mixtrack Pro II) and MIDI Device (for booth models) before configuring in DJ ProMixer.

AUDIO SETTINGS

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Mixtrack Pro II as Audio Sound Card.
Note: You do not need install additionals audio drivers, once connected is just plug and play.

 DJ ProMixer Audio Mixtrack Pro II

Connect your output in (1) RCA  connectors (L+R) for Master Output.

Connect your headphones in front ( ¼ TSR stereo connector).

Important: Numark Mixtrack Pro is designed to be used as internal mode (with internal Sound Card using master output  & headphones) or external mode (using the internal soundcard for each deck).

Numark Mixtrack II have not soundcard, it´s only MIDI Controller.

MIDI SET UP

DJ ProMixer MIDI Mixtrack 2

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (MixTrack / Pro II) and select on the right side NUMARK MIXTRACK PRO II.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

Overview
Mixtrack Pro II Map_2
(Click to enlarge)

Detail

DJ ProMixer Mixtrack Pro II Map detail

1.-   PLAY / PAUSE
2.-   CUE
3.-   SYNC
4.-   SHIFT SELECTOR
5.-   SHIFT + PAD 5 = LOOP SELECTION (AUTO AND MANUAL)
6.-   SHIFT + PAD 6 = SAMPLES SELECTION (1,2,3,4)
7.-   SHIFT + PAD 7 = CUE / LOOP MEMORY SELECTION (1,2,3,4)
8.-   BEND (BUTTONS)
9.-   FX DRY / WET
10.- FX PARAMETER
11.- FX ECHO BEAT SYNC (FROM 2/1 TO 1/8 BEATS)
12.- SAMPLER VOLUMEN
13.- FX 1, FX 2, FX 3
14.- AUTO LOOP X2
15.- LOAD DECK
16.- CHANGE FOCUS TREE / TRACKLIST
17.- PFL
18.-TRACKLIST SCROLL
19.- ROTARY KNOBS OF THE MIXER (HI, MID,BASS)
20.- DECK´S VOLUMEN CONTROLS AND CROSSFADER
21.- BEND (WHEEL)
22.- SCRATCH
23.- ENABLE WHEEL VINYL MODE
24.- PITCH

25.- HEADPHONES VOLUMEN (A AND B)

info mapping                    info PDF

Denon DN MC 6000 MKII

HOW TO SET UP?

The system must recognize your Denon DN-MC 6000 MKII as Audio and MIDI device before configuring in DJ ProMixer.

Denon DN-MC 6000 MKII only requires download and install Denon DJ Asio Driver, once installed you can configure it in DJ ProMixer.

DJ ProMixer Driver ASIO Denon DJ

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your DN-MC6000 MKII as Audio Sound Card.

CONFIGURE YOUR AUDIO SETTINGS

DJ ProMixer Denon MC-6000 MKII ASIO

DJ ProMixer Denon MC6000MK2 Audio Outputs

For Internal Mode choose your output (1.- for XLR connectors or 2.- for RCA). Additional output 3.- Booth / Send Out
Important: DN-MC6000 MKII is designed to be used as internal mode (with internal Sound Card), but you can use also with DJ ProMixer as external mode (with other/s Sound Card/s and external mixer).

MIDI CONFIGURATION

DJ ProMixer Denon MIDI  MC - 6000 MKII

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (DN-MC6000 MKII) and select on the right side DENON MC6000MKII.XML.  MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI  MAP

DJ ProMixer Denon MC6000 MKII Map(Click to enlarge)

                                                                  Detail

DJ ProMixer Denon MC6000 MKII Map Detail

1.-   PLAY / PAUSE
2.-   CUE
3.-   MANUAL LOOP (1.- IN  2.- OUT – EXIT – RELOOP)
4.-   AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS) IN / EXIT / RELOOP MOVE WITH “-“ 1/2 AND “+” x2
5.-   SELECTOR CUE / LOOP – SAMPLES
6.-   KEYLOCK
7.-   EFFECTS DIRECT BUTTONS FX 1, FX 2, FX3
8.-   CUE / LOOP MEMORY (4 DIRECT BUTTONS) (SELECTOR 5 OFF)
8.-  SAMPLER DIRECT BUTTONS (1, 2, 3, 4) (SELECTOR 5 ON)
9.-   MEMORY CUE / LOOP (SHIFT BUTTON)
10.- FX ECHO BEAT SYNC (FROM 2/1 TO 1/8 BEATS)
11.- FX DRY / WET
12.- FX PARAMETER
13.- ENABLE WHEEL VINYL MODE
14.- TRACKLIST SCROLL / CHANGE FOCUS
15.- LOAD DECK
16.- CHANNEL SELECTOR
17.- PFL
18.- ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS)
19.- DECK´S VOLUMEN CONTROLS AND CROSSFADER
20.- PITCH
21.- SYNC
22.- BEND (WHEEL)
23.- BEND (BUTTONS)
24.- SCRATCH
25.- BRAKE
26.- CHANGE FOCUS TREE / PLAYLIST

info mapping                    info PDF

Denon DN MC 2000

HOW TO SET UP?

The system must recognize your Denon DN-MC2000 as Audio and MIDI device before configuring in DJ ProMixer.

Denon DN-MC 2000 only requires download and install Denon DJ Asio Driver, once installed you can configure it in DJ ProMixer.

DJ ProMixer MC 2000 Denon Asio Driver

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Denon DN-MC 2000 as Audio Sound Card.

AUDIO SET UP

DJ ProMixer Denon MC-2000 ASIO

Important: DN-MC 2000 is designed to be used as internal mode (with internal Sound Card), but you can use also with DJ ProMixer as external mode (with other/s Sound Card/s and external mixer).

MIDI SET UP

 DJ ProMixer Denon MC-2000 MIDI

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (DN-MC3000) and select on the right side DENON MC3000.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI  MAP

Overview

DJ ProMixer Denon MC2000 Map

Detail

DJ ProMixer MC2000 Map Detail

1.-  PLAY / PAUSE
2.-  CUE
3.-  MANUAL LOOP (1.- IN  2.- OUT – EXIT – RELOOP)
4.-  AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS) IN  EXIT / RELOOP MOVE WITH “-“ 1/2 AND “+” x2
5.-  SELECTOR CUE (1,2,3,4) / SAMPLES (1,2,3,4)
6.-  KEYLOCK
7.-  EFFECTS DIRECT BUTTONS FX 1, FX 2, FX3
8.-  CUE / LOOP MEMORY (4 DIRECT BUTTONS) (SELECTOR OFF)
9.-  SAMPLES (4 DIRECT BUTTONS) (SELECTOR ON)
10.- FX ECHO BEAT SYNC (FROM 2/1 TO 1/8 BEATS)
11.- FX DRY / WET
12.- FX PARAMETER
13.- ENABLE WHEEL VINYL MODE
14.- TRACKLIST SCROLL
15.- LOAD DECK
16.- ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS)
17.- PFL
18.- DECK´S VOLUMEN CONTROLS AND CROSSFADER
19.- SAMPLER VOLUMEN
20.- PITCH
21.- SYNC
22.- BEND (WHEEL)
23.- BEND (BUTTONS)
24.- SCRATCH
25.- TRACKLIST SELECTOR (PLAYLIST, GROUPS, EXPLORER)
26.- MEMORY CUE / LOOP DECK A
27.- MEMORY CUE / LOOP DECK B
28.- CHANGE FOCUS TREE
29.- CHANGE FOCUS TRACKS

info mapping                    info PDF