Numark Mixtrack / Pro III

HOW TO SET UP?

The system must recognize your Numark Mixtrack / Pro III as Audio Device before configuring in DJ ProMixer.

AUDIO SETTINGS

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Mixtrack Pro III as Audio Sound Card.
Note: You do not need install additionals audio drivers, once connected is just plug and play.

DJ ProMixer Numark Mixtrack Pro 3 Audio

Connect your output in (1) RCA  connectors (L+R) for Master Output.

Connect your headphones in front ( ¼ TSR stereo connector).

Important: Numark Mixtrack Pro is designed to be used as internal mode (with internal Sound Card using master output  & headphones) or external mode (using the internal soundcard for each deck).

MIDI SET UP

DJ ProMixer Numark Mixtrack Pro 3 MIDI

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (MixTrack / Pro III) and select on the right side NUMARK MIXTRACK PRO III.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

Overview
DJ ProMixer Numark Mixtrack Pro III map
(Click to enlarge)

Detail

DJ ProMixer Numark Mixtrack Pro III map detail

 

1.-   PLAY / PAUSE
2.-   CUE
3.-   SYNC
4.-   SHIFT SELECTOR
5.-   ENABLE WHEEL VINYL MODE
6.-   NEEDLE SEARCH
7.-   BEND (BUTTONS)
8.-   PITCH
9.-   FX 1 (ECHO)
10.- FX 2 (FLANGER)
11.- FX 3 (WAH)
12.- FX DRY / WET
13.- (SHIFT +) FX PARAMETER
14.- PAD MODE SELECTOR
15.- PAD MODE SELECTOR + MANUAL LOOP PAD = ENABLE MANUAL LOOP
PAD 1 = LOOP IN / PAD 2 = LOOP OUT / PAD 3 = EXIT / RELOOP
16.- PAD MODE SELECTOR + AUTOLOOP = ENABLE AUTOLOOP
PAD 2 = 1/2 LOOP / PAD 3 = EXIT / RELOOP / PAD 4 = 2X LOOP
17.- PAD MODE SELECTOR + SAMPLER = ENABLE SAMPLER
PAD 1 = SAMPLE 1 / PAD 2 = SAMPLE 2 / PAD 3 = SAMPLE 3 / PAD 4 = SAMPLE 4
18.- CUE PAD: CUE 1 / CUE 2 / CUE 3 / CUE 4
19.- ROTARY KNOBS OF THE MIXER (HI, MID,BASS)
20.- DECK´S VOLUMEN CONTROLS AND CROSSFADER

21.- HEADPHONES VOLUMEN (A / B)
22.- PFL
23.- TRACKLIST SCROLL
24.- CHANGE FOCUS TREE / TRACKLIST
25.- (SHIFT + PUSH) OPEN PLAYLIST
26.- LOAD DECK A / B
27.- BEND (WHEEL)
28.- SCRATCH

PAD MODE DETAIL

DJ ProMixer MIDI Mixtrack 3 PAD mode detail

info mapping                    info PDF

Advertisements

Numark Mixtrack Edge

HOW TO SET UP? The system must recognize your Numark Mixtrack Edge as Audio and MIDI Device before configuring in DJ ProMixer.

AUDIO SETTINGS

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Numark Mixtrack Edge as Audio Sound Card. Note: You do not need install additionals audio drivers, once connected is just plug and play. DJ ProMixer Audio Mixtrack Edge Connect your output  (1/8 TSR stereo connector) in Master Output. Connect your headphones in  1/8 TSR headphones stereo connector.

MIDI SET UP

DJ ProMixer MIDI Mixtrack Edge In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (MixTrack Edge) and select on the right side NUMARK MIXTRACK EDGE.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

Overview DJ ProMixer Mixtrack-Edge map (Click to enlarge)

Detail

DJ ProMixer Mixtrack-Edge map_detail 1.-    PLAY / PAUSE
2.-    CUE
3.-    SYNC
4.-    (SHIFT +) KEYLOCK
5.-    SHIFT SELECTOR
6.-    FX SELECTOR
7.-    CUE / LOOP MEMORY
8.-    SAMPLES (1,2,3)
9.-    (FX SELECTOR +) FX 1, FX 2, FX 3
10.-  MANUAL LOOP (LOOP IN / OUT / EXIT-RELOOP)
11.-  (SHIFT +) AUTO LOOP (IN 4 BEATS): 1/2 , X2, EXIT-RELOOP
12.-  CHANGE FOCUS TREE / TRACKLIST
13.-  ENTER / PUSH
14.-  HEADPHONES VOLUMEN (A AND B)
15.-  EQ. TREBLE
16.-  EQ. BASS
17.-  (FX SELECTOR) FX DRY / WET
18.-  (FX SELECTOR) FX PARAMETER
19.-  WHEEL: BEND
20.-  WHEEL: SCRATCH / (FX SELECTOR) SCRATCH
21.-  WHEEL: MOVE UP / DOWN PITCH
22.-  WHEEL: SEARCH MODE
23.-  PFL
24.-  LOAD DECK
25.-  WHEEL
26.-  DECK´S VOLUMEN CONTROLS AND CROSSFADER

info mapping                    info PDF

Numark Mixtrack / Pro II

HOW TO SET UP?

The system must recognize your Numark Mixtrack / Pro II as Audio Device (only Mixtrack Pro II) and MIDI Device (for booth models) before configuring in DJ ProMixer.

AUDIO SETTINGS

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Mixtrack Pro II as Audio Sound Card.
Note: You do not need install additionals audio drivers, once connected is just plug and play.

 DJ ProMixer Audio Mixtrack Pro II

Connect your output in (1) RCA  connectors (L+R) for Master Output.

Connect your headphones in front ( ¼ TSR stereo connector).

Important: Numark Mixtrack Pro is designed to be used as internal mode (with internal Sound Card using master output  & headphones) or external mode (using the internal soundcard for each deck).

Numark Mixtrack II have not soundcard, it´s only MIDI Controller.

MIDI SET UP

DJ ProMixer MIDI Mixtrack 2

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (MixTrack / Pro II) and select on the right side NUMARK MIXTRACK PRO II.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

Overview
Mixtrack Pro II Map_2
(Click to enlarge)

Detail

DJ ProMixer Mixtrack Pro II Map detail

1.-   PLAY / PAUSE
2.-   CUE
3.-   SYNC
4.-   SHIFT SELECTOR
5.-   SHIFT + PAD 5 = LOOP SELECTION (AUTO AND MANUAL)
6.-   SHIFT + PAD 6 = SAMPLES SELECTION (1,2,3,4)
7.-   SHIFT + PAD 7 = CUE / LOOP MEMORY SELECTION (1,2,3,4)
8.-   BEND (BUTTONS)
9.-   FX DRY / WET
10.- FX PARAMETER
11.- FX ECHO BEAT SYNC (FROM 2/1 TO 1/8 BEATS)
12.- SAMPLER VOLUMEN
13.- FX 1, FX 2, FX 3
14.- AUTO LOOP X2
15.- LOAD DECK
16.- CHANGE FOCUS TREE / TRACKLIST
17.- PFL
18.-TRACKLIST SCROLL
19.- ROTARY KNOBS OF THE MIXER (HI, MID,BASS)
20.- DECK´S VOLUMEN CONTROLS AND CROSSFADER
21.- BEND (WHEEL)
22.- SCRATCH
23.- ENABLE WHEEL VINYL MODE
24.- PITCH

25.- HEADPHONES VOLUMEN (A AND B)

info mapping                    info PDF

Numark Mixtrack / Pro

HOW TO SET UP?

The system must recognize your Numark Mixtrack / Pro as Audio Device (only Mixtrack Pro) and MIDI Device (for booth models) before configuring in DJ ProMixer.

CONFIGURATION

Numark Mixtrack has two different set up (for Internal or External Mode):

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Mixtrack Pro as Audio Sound Card.

AUDIO SETTINGS

INTERNAL MODE (Master + Headphones)

For Internal Mode connect your output in (1) RCA  connectors (L+R) for Master Output.

Connect your headphones in front ( ¼ TSR stereo connector).

EXTERNAL MODE (Deck A + Deck B connected to external mixer)

For External Mode connect your outputs 1.- RCA  connectors (L+R) for Deck A, and  2.- RCA connectors (L+R) for Deck B.

Important: Numark Mixtrack Pro is designed to be used as internal mode (with internal Sound Card using master output  & headphones) or external mode (using the internal soundcard for each deck).

Numark Mixtrack have not soundcard, it´s only MIDI Controller.

MIDI SET UP

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (MixTrack Pro) and select on the right side NUMARK MIXTRACK PRO.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

Overview

(Click to enlarge)

Detail

1.-   PLAY / PAUSE
2.-   CUE
3.-   SELECTOR OFF : MANUAL LOOP (1.- IN  2.- OUT
EXIT / RELOOP)
4.-   SELECTOR ON:  AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)(1.-MOVE DOWN    2.- IN  EXIT / RELOOP IN 3.-MOVE UP)
5.-   SELECTOR ON: MEMORY CUE/LOOP  (1,2,3)
6.-   SELECTOR ON: FX 1, FX 2, FX 3
7.-   STUTTER
8.-   KEYLOCK
9.-   ENABLE WHEEL VINYL MODE
10.- FX ECHO BEAT SYNC (FROM 2/1 TO 1/8 BEATS)
11.- FX DRY / WET
12.- FX PARAMETER
13.- FOLDER / FILES SELECTOR
14.- TRACKLIST SCROLL
15.- LOAD DECK
16.- BEND (BUTTONS)
17.- PFL
18.- ROTARY KNOBS OF THE MIXER (HI, MID,BASS)
19.- DECK´S VOLUMEN CONTROLS AND CROSSFADER
20.- PITCH
21.- SYNC
22.- BEND (WHEEL)
23.- SCRATCH

SELECTORS DETAIL

DJ ProMixer Numark Mixtrack Selectors Detail

NEW SELECTOR´S FEATURES:

In this new MIDI Map there are included three buttons as “Selectors”:

1.- “Delete” and “Effects” buttons are connected for enable “Hot Cue” buttons (1,2,3) When “Delete” button is turn on it enables Memory CUE /loop for FX Buttons, when is turn on “Effects” it enables Effects (FX1, FX2, FX3).

2.- “Manual” button when is turn off it enables Manual Loop (In, Out, Exit/Reloop), when is turn on it enables Auto Loop (Move Down,  In / Out /Exit / Reloop, Move Up).

NEW:  FOLDER / FILES SELECTOR

Back Button select Folder / Files into the Browse.

info mapping     info PDF