Numark Mixtrack Edge

HOW TO SET UP? The system must recognize your Numark Mixtrack Edge as Audio and MIDI Device before configuring in DJ ProMixer.

AUDIO SETTINGS

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Numark Mixtrack Edge as Audio Sound Card. Note: You do not need install additionals audio drivers, once connected is just plug and play. DJ ProMixer Audio Mixtrack Edge Connect your output  (1/8 TSR stereo connector) in Master Output. Connect your headphones in  1/8 TSR headphones stereo connector.

MIDI SET UP

DJ ProMixer MIDI Mixtrack Edge In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (MixTrack Edge) and select on the right side NUMARK MIXTRACK EDGE.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

Overview DJ ProMixer Mixtrack-Edge map (Click to enlarge)

Detail

DJ ProMixer Mixtrack-Edge map_detail 1.-    PLAY / PAUSE
2.-    CUE
3.-    SYNC
4.-    (SHIFT +) KEYLOCK
5.-    SHIFT SELECTOR
6.-    FX SELECTOR
7.-    CUE / LOOP MEMORY
8.-    SAMPLES (1,2,3)
9.-    (FX SELECTOR +) FX 1, FX 2, FX 3
10.-  MANUAL LOOP (LOOP IN / OUT / EXIT-RELOOP)
11.-  (SHIFT +) AUTO LOOP (IN 4 BEATS): 1/2 , X2, EXIT-RELOOP
12.-  CHANGE FOCUS TREE / TRACKLIST
13.-  ENTER / PUSH
14.-  HEADPHONES VOLUMEN (A AND B)
15.-  EQ. TREBLE
16.-  EQ. BASS
17.-  (FX SELECTOR) FX DRY / WET
18.-  (FX SELECTOR) FX PARAMETER
19.-  WHEEL: BEND
20.-  WHEEL: SCRATCH / (FX SELECTOR) SCRATCH
21.-  WHEEL: MOVE UP / DOWN PITCH
22.-  WHEEL: SEARCH MODE
23.-  PFL
24.-  LOAD DECK
25.-  WHEEL
26.-  DECK´S VOLUMEN CONTROLS AND CROSSFADER

info mapping                    info PDF

Numark NDX 500

HOW TO SET UP?

The system must recognize your Numark NDX-500 device/s before configuring in DJ ProMixer.
IMPORTANT: Numark NDX-500 is a MIDI and audio sound card device

MIDI CONFIGURATION

Single Mode (2 Numark NDX-500 Connected)

DJ ProMixer Single Numark NDX 500

Select in MIDI PORT / MIDI MAP 1 on the left side one device (Numark NDX500 0) and select on the right side NUMARK NDX-500(SINGLE A).XML. Select in MIDI PORT / MIDI MAP 2 on the left side the other device (Numark NDX500 I) and select on the right side NUMARK NDX-500(SINGLE B).XML

Dual Mode

DJ ProMixer Dual Numark NDX 500

Select in MIDI PORT / MIDI MAP 1 on the left side Numark NDX500 0, and select on the right side NUMARK NDX-500 (A AND B).XML. Nothing selected in MIDI PORT / MIDI MAP 2 How to change the decks? Two ways: 1.- Hardware: Use the “Single Button”. 2.- Software: By clicking the headphone button of the deck.

AUDIO CONFIGURATION

Open DJ ProMixer and go to “Config”, open “Audio Setup”, here you can select your Numark NDX-500 as Audio Sound Card.

DJ ProMixer Audio Numark NDX 500

MIDI MAP

DJ ProMixer Numark NDX 500 Map

1.-   PLAY / PAUSE
2.-   CUE
 
3.-   SYNC
 
4.-   SCROLL / LOAD / ENTER
5.-   CHANGE FOCUS TREE / TRACKLIST
6.-   MANUAL LOOP (IN – OUT – EXIT / RELOOP)
7.-   CUE / LOOP MEMORY (1, 2, 3) 

8.-   MEMORIZE CUE / LOOP
9.-   BRAKE
10.- REVERSE
11.- SCRATCH MODE (WHEEL)
12.- SEARCH MODE (WHEEL)
13.- DECK SELECTOR (DECK A / DECK B) (ONLY DUAL MODE)
14.- CHANGE FOCUS PLAYLIST / GROUPS-SUBGROUPS / EXPLORER 
15.- PITCH

16.- PITCH BEND
17.- PITCH
18.- BEND (BUTTONS)
19.- BEND (WHEEL)
20.- WHEEL
21.- LINK TO PC (SOURCE)

info mapping                    info PDF

Numark Total Control

HOW TO SET UP?

The system must recognize your Numark Total Control before configuring in DJ ProMixer.
IMPORTANT: Numark Total Control is a MIDI Device (have not integrated audio device/s) For audio configuration choose your work mode and audio sound card/s).

MIDI CONFIGURATION

DJ ProMixer Numark Total Control MIDI

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (Numark TOTAL CONTROL MIDI0) and select on the right side NUMARK TOTAL CONTROL.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

TWO MIDI MAPS

Overview

Numark Total Control MIDI map

Detail

DJ ProMixer Numark Total Control MIDI map detail

1.-   PLAY
2.-   PAUSE
3.-   CUE
4.-   PITCH
5.-   SYNC
6.-   KEYLOCK
7.-   PFL
8.-   MANUAL LOOP (1.- IN  2.- OUT / EXIT / RELOOP)
9.-   PITCH BEND
10.- CHANGE FOCUS TREE / TRACKLIST
11.- SCROLL / LOAD / ENTER
12.- LOAD TRACK
13.- FX DRY / WET
14.- FX PARAMETER
15.- MID MAP 1 AND MIDI MAP 2 – FX – ECHO
16.- MIDI MAP 1 – SCRATCH / MIDI MAP 2 – FX – FLANGER
17.- MIDI MAP 1  FX FLANGER / MIDI MAP 2 – SAMPLER 1
18.- MIDI MAP 1 FX WAH / MIDI MAP 2 – SAMPLER 2
19.- FX ECHO BEAT SYNC
20.- SAMPLER VOLUMEN
21.- PFL VOLUMEN (A AND B)
22.- ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS) / KILL = PUSH (HI, MID, BASS)
23.- VOLUMEN CONTROLS AND CROSSFADER
24.- WHEELS

info mapping                    info PDF

Numark Stealth Control

HOW TO SET UP?

The system must recognize your Numark Stealth Control before configuring in DJ ProMixer.
IMPORTANT: Numark Stealth Control is a MIDI Device (It has not integrated audio device/s) For audio configuration choose your work mode and audio sound card/s).

MIDI CONFIGURATION

DJ ProMixer Numark Stealth Control MIDI

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (Numark OMNI CONTROL MIDI0) and select on the right side NUMARK OMNI CONTROL.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

TWO MIDI MAPS

Overview

DJ ProMixer Numark Stealth Control MIDI map

Detail

Numark Stealth Control MIDI map detail

1.-   PLAY
2.-   PAUSE
3.-   CUE
4.-   PITCH
5.-   SYNC
6.-   KEYLOCK
7.-   PFL
8.-   MANUAL LOOP (1.- IN  2.- OUT / EXIT / RELOOP)
9.-   PITCH BEND
10.- CHANGE FOCUS TREE / TRACKLIST
11.- SCROLL / LOAD / ENTER
12.- LOAD TRACK
13.- FX DRY / WET
14.- FX PARAMETER
15.- MID MAP 1 AND MIDI MAP 2 – FX – ECHO
16.- MIDI MAP 1 – SCRATCH / MIDI MAP 2 – FX – FLANGER
17.- MIDI MAP 1  FX FLANGER / MIDI MAP 2 – SAMPLER 1
18.- MIDI MAP 1 FX WAH / MIDI MAP 2 – SAMPLER 2
19.- FX ECHO BEAT SYNC
20.- SAMPLER VOLUMEN
21.- PFL VOLUMEN (A AND B)
22.- ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS) / KILL = PUSH (HI, MID, BASS)
23.- VOLUMEN CONTROLS AND CROSSFADER
24.- WHEELS

info mapping                    info PDF

Numark Omni Control

HOW TO SET UP?

The system must recognize your Numark Omni Control as Audio and MIDI device before configuring in DJ ProMixer.

CONFIGURATION

Numark Omni control requires download and install Numark Asio Driver.

DJ ProMixer ASIO Numark Omni Control

This controller has two different configurations (for Internal or External Mode):

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Mixtrack Pro as Audio Sound Card.

AUDIO SETTINGS

INTERNAL MODE (Master + Headphones)

DJ ProMixer Numark Omni Control ASIO Internal

DJ ProMixer Numark Omni control Audio Rear Internal

For Internal Mode connect your output in (Output 1) RCA  connectors (L+R) for Master Output.
Connect your headphones in front ( ¼ TSR stereo connector).

EXTERNAL MODE (Deck A + Deck B connected to external mixer)

DJ ProMixer Numark Omni Control ASIO External

DJ ProMixer Numark Omni Control Audio Rear External

For External Mode connect your outputs 1.- RCA  connectors (L+R) for Deck A (Output 1), and  2.- RCA connectors (L+R) for Deck B (Output 2).

MIDI SET UP

DJ ProMixer Numark Omni Control MIDI

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (Numark OMNI CONTROL MIDI0) and select on the right side NUMARK OMNI CONTROL.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

TWO MIDI MAPS

Overview

DJ ProMixer Numark Omni control MIDI map

(Click to enlarge)

Detail

 DJ ProMixer Numark Omni control MIDI map detail

1.-   PLAY
2.-   PAUSE
3.-   CUE
4.-   PITCH
5.-   SYNC
6.-   KEYLOCK
7.-   PFL
8.-   MANUAL LOOP (1.- IN  2.- OUT / EXIT / RELOOP)
9.-   PITCH BEND
10.- CHANGE FOCUS TREE / TRACKLIST
11.- SCROLL / LOAD / ENTER
12.- LOAD TRACK
13.- FX DRY / WET
14.- FX PARAMETER
15.- MID MAP 1 AND MIDI MAP 2 – FX – ECHO
16.- MIDI MAP 1 FX – FLANGER / MIDI MAP 2 – SCRATCH
17.- MIDI MAP 1 SAMPLER 1 / MIDI MAP 2 – FX FLANGER
18.- MIDI MAP 1 SAMPLER 2 / MIDI MAP 2 – FX WAH
19.- FX ECHO BEAT SYNC
20.- SAMPLER VOLUMEN
21.- PFL VOLUMEN (A AND B)
22.- ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS) / KILL = PUSH (HI, MID, BASS)
23.- VOLUMEN CONTROLS AND CROSSFADER
24.- WHEELS

info mapping                    info PDF