Vestax VCI – 100

HOW TO SET UP?

The system must recognize your Vestax VCI – 100 before configuring in DJ ProMixer.
IMPORTANT: Vestax VCI – 100 is a MIDI Device (It has not integrated audio device/s) For audio configuration choose your work mode and audio sound card/s).

MIDI CONFIGURATION

DJ ProMixer MIDI Vestax VCI-100

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (VESTAX VCI 100 MIDI0) and select on the right side VESTAX VCI 100.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

Overview

DJ ProMixer Vestax VCI-100 map

 

1.-   PLAY
2.-   PAUSE
3.-   CUE
4.-   CUE / LOOP MEMORY
5.-   PITCH
6.-   AUTO LOOP (X4)
7.-   KEYLOCK
8.-   VINYL MODE
9.-   SYNC

TRACKLIST DETAIL

DJ ProMixer Vestax VCI-100 bowser detail map

______________________________________________________________________

10.- CHANGE FOCUS TREE / TRACKLIST
11.- ENTER TREE / TRACKLIST
12.- TRACKLIST UP
13.- TRACKLIST DOWN
14.- LOAD TRACK A
15.- LOAD TRACK B
16.- EXIT / RELOOP (A / B)
17.- AUTO LOOP 1/2 (A / B)
18.- AUTO LOOP X2 (A / B)
______________________________________________________________________

19.- PFL
20.- HEADPHONES VOLUMEN

FX / CUE DETAIL

DJ ProMixer FX CUE Vestax VCI 100 Detail

______________________________________________________________________

21.- SELECTOR FX-A / FX-B / CUE
22.- SELECTOR A POSITION (RED):   DECK A FX 1: ECHO
22.- SELECTOR B POSITION (BLUE): DECK B FX 1: ECHO
22.- SELECTOR mas POSITION (WHITE): DECK A CUE / LOOP MEM MOVE “<”
23.- SELECTOR A POSITION (RED):   DECK A FX 2: FLANGER
23.- SELECTOR B POSITION (BLUE): DECK B FX 2: FLANGER
23.- SELECTOR mas POSITION (WHITE): DECK A CUE / LOOP MEM MOVE “>”
24.- SELECTOR A POSITION (RED):   DECK A FX 3: WAH
24.- SELECTOR B POSITION (BLUE): DECK B FX 3: WAH
24.- SELECTOR mas POSITION (WHITE): DECK B CUE / LOOP MEM MOVE “<”
25.- SELECTOR mas POSITION (WHITE): DECK B CUE / LOOP MEM MOVE “>”
26.- SELECTOR A POSITION (RED):   DECK A FX DRY/WET
26.- SELECTOR B POSITION (BLUE): DECK B FX DRY/WET
27.- SELECTOR A POSITION (RED):   DECK A FX PARAMETER
27.- SELECTOR B POSITION (BLUE): DECK B FX PARAMETER
______________________________________________________________________

28.- WHEELS
29.- VOLUMEN CONTROLS AND CROSSFADER
30.- ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS) / KILL = PUSH (HI, MID, BASS)

info mapping                    info PDF

Advertisements

Hercules DJ Control MP3

HOW TO SET UP?

The system must recognize your Hercules DJ Control MP3 as HID device before configuring in DJ ProMixer.

Hercules DJ Control MP3 only requires download and install Hercules Driver, once installed you can configure it in DJ ProMixer.

IMPORTANT: Hercules DJ Control MP3 is a MIDI Device (have not integrated audio device/s) For audio configuration choose your work mode and audio sound card/s).

HID SET UP

Hercules DJ Console Mk2 has two HID maps:

1.- Normal: Respecting the name of the serigraphy
 DJ ProMixer HID Hercules DJ Control MP3 (Normal)

In “Config” go to “HID Controllers” and then select in HID PORT / HID MAP 1 on the left side one device (HERCULES DJ CONSOLE MK2 MID0) and select on the right side HERCULES DJ CONSOLE MK2 (NORMAL).XML. HID PORT / HID MAP 2: Nothing Selected.

2.- Pitch Inverse: Inverting Pitch / Volume

DJ ProMixer HID Hercules DJ Control MP3 (Inverse)

In “Config” go to “HID Controllers” and then select in HID PORT / HID MAP 1 on the left side one device (HERCULES DJ CONSOLE MK2 MID0) and select on the right side HERCULES DJ CONSOLE MK2 (PITCH INVERSE).XML. HID PORT / HID MAP 2: Nothing Selected.

HID MAP

DJ ProMixer Hercules DJ Control MP3 map

 Overview

Detail

DJ ProMixer Hercules DJ Control MP3 map detail


1.-   PLAY / PAUSE
2.-   CUE
3.-   SYNC
4.-   MOVE WITH ACTIVE FUNCTION (CUE/LOOP MEMORY  OR ACTIVE AUTO LOOP
5.-   BEND (BUTTONS)
6.-   PITCH (NORMAL MAP)
6.-   VOLUMEN (PITCH INVERSE MAP)
7.-   VOLUMEN (NORMAL MAP)
7.-   PITCH (PITCH INVERSE)
8.-   PAD BUTTON SELECTOR: OFF
BUTTON 1 – SAMPLE 1
BUTTON 2 – SAMPLE 2
BUTTON 3 – SAMPLE 3
8.-   PAD BUTTON SELECTOR: POSITION “FX” (RED LIGHT)
BUTTON 1 – FX 1 (ECHO)
BUTTON 2 – FX 2 (FLANGER)
BUTTON 3 – FX 3 (WAH)
8.-   PAD BUTTON SELECTOR: POSITION “CUE” (YELLOW LIGHT)
BUTTON 1 – CUE / LOOP 1
BUTTON 2 – CUE / LOOP 2
BUTTON 3 – CUE / LOOP 3
8.-   PAD BUTTON SELECTOR: POSITION “LOOP” (GREEN LIGHT)
BUTTON 1 – LOOP IN
BUTTON 2 – LOOP OUT
BUTTON 3 – EXIT / RELOOP

9.-   KEYLOCK
10.- LOAD DECK
11.- ROTARY KNOBS OF THE MIXER (EQ HI, MID,BASS)
12.- CROSSFADER
13.- PFL
14.- WHEEL

info mapping                    info PDF

Hercules DJ Console MK2

HOW TO SET UP?

The system must recognize your Hercules DJ Console MK2 as Audio and HID device before configuring in DJ ProMixer.

Hercules DJ Console MK2 only requires download and install Hercules ASIO Driver, once installed you can configure it in DJ ProMixer.

CONFIGURATION

Hercules DJ Console MK2 has two different set up (for Internal or External Mode):

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Hercules DJ Console MK2 as Audio Sound Card.

AUDIO SETTINGS

INTERNAL MODE (Master + Headphones)

DJ ProMixer ASIO Hercules DJ 4Set

DJ ProMixer Hercules DJ Console MK2 audio connections 2

For Internal Mode choose your output: 1.-  RCA or  2.- 1/8  TSR connector.

Connect your headphones in front ( ¼ TSR stereo connector).

EXTERNAL MODE (Deck A + Deck B connected to external mixer)

DJ ProMixer ASIO Hercules DJ 4Set Multi Channel External Mixer

DJ ProMixer Hercules DJ Console MK2 audio connections

For External Mode choose your outputs: Deck 1.- (1) RCA or (2) 1/8 TSR connector  Deck 2.-  (3) RCA or 1/8 TSR connector

Important: Hercules DJ Console MK2 is designed to be used as internal mode (with internal Sound Card using master output  & headphones) or external mode (using the internal soundcard for each deck).

HID SET UP

Hercules DJ Console Mk2 has two HID maps:

1.- Normal: Respecting the name of the serigraphy

DJ ProMixer HID Hercules DJ Console MK2 (Normal)

In “Config” go to “HID Controllers” and then select in HID PORT / HID MAP 1 on the left side one device (HERCULES DJ CONSOLE MK2 MID0) and select on the right side HERCULES DJ CONSOLE MK2 (NORMAL).XML. HID PORT / HID MAP 2: Nothing Selected.

2.- Pitch Inverse: Inverting Pitch / Volume

DJ ProMixer HID Hercules DJ Console MK2 (Inverse)

In “Config” go to “HID Controllers” and then select in HID PORT / HID MAP 1 on the left side one device (HERCULES DJ CONSOLE MK2 MID0) and select on the right side HERCULES DJ CONSOLE MK2 (PITCH INVERSE).XML. HID PORT / HID MAP 2: Nothing Selected.

HID MAP

DJ ProMixer Hercules DJ Console MK2 map

Overview

Detail

DJ ProMixer Hercules DJ Console MK2 map detail


1.-   PLAY / PAUSE
2.-   CUE
3.-   SYNC
4.-   MOVE WITH ACTIVE FUNCTION (CUE/LOOP MEMORY  OR ACTIVE AUTO LOOP
5.-   BEND (BUTTONS)
6.-   PITCH (NORMAL MAP)
6.-   VOLUMEN (PITCH INVERSE MAP)
7.-   VOLUMEN (NORMAL MAP)
7.-   PITCH (PITCH INVERSE)
8.-   PAD BUTTON SELECTOR: OFF
BUTTON 1 – SAMPLE 1
BUTTON 2 – SAMPLE 2
BUTTON 3 – SAMPLE 3
8.-   PAD BUTTON SELECTOR: POSITION “FX” (RED LIGHT)
BUTTON 1 – FX 1 (ECHO)
BUTTON 2 – FX 2 (FLANGER)
BUTTON 3 – FX 3 (WAH)
8.-   PAD BUTTON SELECTOR: POSITION “CUE” (YELLOW LIGHT)
BUTTON 1 – CUE / LOOP 1
BUTTON 2 – CUE / LOOP 2
BUTTON 3 – CUE / LOOP 3
8.-   PAD BUTTON SELECTOR: POSITION “LOOP” (GREEN LIGHT)
BUTTON 1 – LOOP IN
BUTTON 2 – LOOP OUT
BUTTON 3 – EXIT / RELOOP

9.-   KEYLOCK
10.- LOAD DECK
11.- ROTARY KNOBS OF THE MIXER (EQ HI, MID,BASS)
12.- CROSSFADER
13.- SOURCE AUDIO SOUND CARD (DECK A / B)
14.- WHEEL

info mapping                    info PDF

Hercules DJ Console MK4

HOW TO SET UP?

The system must recognize your Hercules DJ Console MK4 as Audio and MIDI device before configuring in DJ ProMixer.

Hercules DJ Console MK4 only requires download and install Hercules ASIO Driver, once installed you can configure it in DJ ProMixer.

CONFIGURATION

Hercules DJ Console MK4 has two different set up (for Internal or External Mode):

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Hercules DJ Console MK4 as Audio Sound Card.

AUDIO SETTINGS

INTERNAL MODE (Master + Headphones)

DJ ProMixer ASIO Hercules DJ 4Set

DJ ProMixer Hercules DJ Control MK4 audio connections

For Internal Mode choose your output: 1.-  RCA or  2.- 1/8  TSR connector.

Connect your headphones in front ( ¼ TSR stereo connector).

EXTERNAL MODE (Deck A + Deck B connected to external mixer)

DJ ProMixer ASIO Hercules DJ 4Set Multi Channel External Mixer

DJ ProMixer Hercules DJ Control MK4 audio connections 2

 

For External Mode choose your outputs: Deck 1.- (1) RCA or (2) 1/8 TSR connector  Deck 2.-  (3) RCA

Important: Hercules DJ Console MK4 is designed to be used as internal mode (with internal Sound Card using master output  & headphones) or external mode (using the internal soundcard for each deck).

MIDI SET UP

DJ ProMixer MIDI Hercules DJ Console MK4

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (HERCULES DJ CONSOLE MK4 MID0) and select on the right side HERCULES DJ CONSOLE MK4.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

DJ ProMixer Hercules DJ Control MK4 mapOverview

Detail

DJ ProMixer Hercules DJ Control MK4 map detail

1.-   PLAY / PAUSE
2.-   CUE
3.-   SYNC
4.-   MOVE WITH ACTIVE FUNCTION (CUE/LOOP MEMORY  OR ACTIVE AUTO LOOP
5.-   PITCH
6.-   BEND (BUTTONS)
7.-   PAD MODE SELECTOR: OFF – LOOP ACTIVE , ON – FX ACTIVE
8.-   PAD MODE SELECTOR OFF: LOOP ACTIVE
PAD 1 – 1/2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
PAD 2 – X2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
PAD 3 – MANUAL LOOP: IN
PAD 4 – MANUAL LOOP: OUT / EXIT / RELOOP
9.-   PAD MODE SELECTOR ON: FX ACTIVE
PAD 1 – FX 1 (ECHO)
PAD 2 – FX 2 (FLANGER)

PAD 3 – FX 3 (WAH)
10.- SOURCE AUDIO SOUND CARD (DECK A / B)
11.- BEND (WHEEL)
12.- SCRATCH
13.- ENABLE MIC (AUDIO SOUND CARD)
14.- SCRATCH A / B (BUTTON)
15.- CHANGE FOCUS TREE / TRACKLIST
16.- OPEN PLAYLIST
17.- TRACKLIST MOVE UP
18.- TRACKLIST MOVE DOWN
19.-  LOAD DECK
20.-  PFL
21.-  ROTARY KNOBS OF THE MIXER (EQ HI, MID,BASS)
22.-  DECK´S VOLUMEN CONTROLS AND CROSSFADER


info mapping                    info PDF

Hercules DJ Console Steel

HOW TO SET UP?

The system must recognize your Hercules DJ Console Steel as MIDI device before configuring in DJ ProMixer.

Hercules DJ Console Steel only requires download and install Hercules Driver, once installed you can configure it in DJ ProMixer.

IMPORTANT: Hercules DJ Console Steel has not integrated audio device/s. For audio configuration choose your work mode and audio sound card/s.

MIDI SET UP

DJ ProMixer MIDI Hercules DJ Console Steel

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (HERCULES DJ CONSOLE STEEL MID0) and select on the right side HERCULES DJ CONSOLE STEEL.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

DJ ProMixer Hercules DJ Console Steel map

Overview

Detail

DJ ProMixer Hercules DJ Console Steel map detail

1.-   PLAY
2.-   PAUSE
3.-   CUE
4.-   SYNC
5.-   PITCH
6.-   BEND (BUTTONS)
7.-   1/2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
7.-   (SHIFT ENABLED) MEMORY CUE / LOOP 1
8.-   X2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
8.-   (SHIFT ENABLED) MEMORY CUE / LOOP 2
9.-   MANUAL LOOP: IN
9.-   (SHIFT ENABLED) MEMORY CUE / LOOP 3
10.- MANUAL LOOP: OUT / EXIT / RELOOP
10.- (SHIFT ENABLED) MEMORY CUE / LOOP 4
11.- FX 1: ECHO
11.- (SHIFT ENABLED) SAMPLE 1
12.- FX 2: FLANGER
12.- (SHIFT ENABLED) SAMPLE 2

13.- MOVE WITH ACTIVE FUNCTION (CUE/LOOP MEMORY  OR ACTIVE AUTO LOOP)
14.- BEND (WHEEL)
15.- SCRATCH
16.- SCRATCH (BUTTON)
17.- CHANGE FOCUS TREE / TRACKLIST
18.- OPEN PLAYLIST

19.- TRACKLIST MOVE UP
20.- TRACKLIST MOVE DOWN
21.- LOAD DECK
22.- KILL (EQ. TREBLE)
23.- KILL (EQ. MID)
24.- KILL (EQ. BASS)
25.- PFL
26.- ROTARY KNOBS OF THE MIXER (EQ HI, MID,BASS)
27.- GAIN

28.- DECK´S VOLUMEN A / B
29.- SHIFT
30.- FX DRY / WET (DECK A / B)
31.- FX PARAMETER (DECK A / B)
32.- DECK SELECTOR (A / B) FX DRY / WET – FX PARAMETER
33.- SAMPLER VOLUMEN
34.- CROSSFADER
35.- PFL / CUE MIX: LEFT (DECK A) / RIGHT (DECK B)
36.- HEADPHONES VOLUMEN A / B

info mapping                    info PDF

Hercules DJ Console RMX

HOW TO SET UP?

The system must recognize your Hercules DJ Console RMX as Audio and MIDI device before configuring in DJ ProMixer.

Hercules DJ Console RMX only requires download and install Hercules ASIO Driver, once installed you can configure it in DJ ProMixer.

CONFIGURATION

Hercules DJ Console RMX has two different set up (for Internal or External Mode):

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Hercules DJ Console RMX as Audio Sound Card.

AUDIO SETTINGS

INTERNAL MODE (Master + Headphones)

DJ ProMixer ASIO Hercules DJ 4Set

DJ ProMixer Audio Connections Hercules DJ Console RMX 2

For Internal Mode choose your output: 1.-  ¼ TSR connectors (balanced)  or 2.- RCA (unbalanced).

Connect your headphones in front ( ¼ TSR stereo connector).

EXTERNAL MODE (Deck A + Deck B connected to external mixer)

DJ ProMixer ASIO Hercules DJ 4Set Multi Channel External Mixer

DJ ProMixer Audio Connections Hercules DJ Console RMX 1

 

For External Mode choose your outputs: Deck 1.- (1) ¼ TSR connectors (balanced)  or (2).- RCA (unbalanced) Deck 2.-  (3) ¼ TSR connectors (balanced)  or (4).- RCA (unbalanced)

Important: Hercules DJ Console RMX is designed to be used as internal mode (with internal Sound Card using master output  & headphones) or external mode (using the internal soundcard for each deck).

MIDI SET UP

DJ ProMixer MIDI Hercules DJ Console RMX

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (HERCULES DJ CONSOLE RMX MID0) and select on the right side HERCULES DJ CONSOLE RMX.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

DJ ProMixer Hercules DJ Console RMX map

Overview

Detail

DJ ProMixer Hercules DJ Console RMX map detail

1.-   PLAY
2.-   PAUSE
3.-   CUE
4.-   SYNC
5.-   PITCH
6.-   BEND (BUTTONS)
7.-   1/2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
8.-   X2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
9.-   MANUAL LOOP: IN
10.- MANUAL LOOP: OUT / EXIT / RELOOP
11.- FX 1: ECHO
12.- FX 2: FLANGER

13.- MOVE WITH ACTIVE FUNCTION (CUE/LOOP MEMORY  OR ACTIVE AUTO LOOP)
14.- BEND (WHEEL)
15.- SCRATCH
16.- SCRATCH (BUTTON)
17.- CHANGE FOCUS TREE / TRACKLIST
18.- OPEN PLAYLIST

19.- TRACKLIST MOVE UP
20.- TRACKLIST MOVE DOWN
21.- LOAD DECK
22.- KILL (EQ. TREBLE)
23.- KILL (EQ. MID)
24.- KILL (EQ. BASS)
25.- PFL
26.- ROTARY KNOBS OF THE MIXER (EQ HI, MID,BASS)
27.- GAIN

28.- DECK´S VOLUMEN A / B
29.- SAMPLER VOLUMEN
30.- CROSSFADER

info mapping                    info PDF

Pioneer DDJ – RX

HOW TO SET UP?

The system must recognize your Pioneer DDJ-RX as Audio and MIDI Device before configuring in DJ ProMixer.
Pioneer DDJ-RX only requires download and install Pioneer DDJ RX ASIO Driver.

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Pioneer DDJ-RX as Audio Sound Card.

AUDIO SETTINGS

DJ ProMixer Pioneer DDJ-RX ASIO

DJ ProMixer Pioneer DDJ-RX audio detail

For Internal Mode choose your output (1.- for XLR connectors or 2.- for RCA)

Important: Pioneer DDJ –RX is designed to be used as internal mode (with internal Sound Card), but you can use also with DJ ProMixer as external mode (with other/s Sound Card/s and external mixer).

MIDI CONFIGURATION

DJ ProMixer Pioneer DDJ-RX MIDI

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (DDJ-RX MID) and select on the right side PIONEER DDJ-RX.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

DJ ProMixer Pioneer DDJ-RX map

 

 DETAIL

DJ ProMixer Pioneer DDJ-RX map detail

 

1.-   PLAY / PAUSE
2.-   CUE
3.-   SYNC
4.-   SHIFT
5.-   REVERSE
6.-   BRAKE
7.-   FX 1 (ECHO)
8.-   FX 2 (FLANGER)
9.-   FX 3 (WAH)
10.- FX DRY / WET
11.- FX PARAMETER
12.- FX ECHO SYNC (FROM 2/1 TO 1/8 BEATS)
13.- TRACKLIST SCROLL
14.- CHANGE FOCUS TREE / TRACKLIST
15.- CHANGE FOCUS PLAYLIST / GROUPS-SUBGROUPS / EXPLORER
16.- KEYLOCK
17.- (SHIFT +) TEMPO RANGE (4%, 8%, 10%, 12%, 16%, 32%)
18.- PITCH
19.- AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS) PUSH: AUTO IN  EXIT / RELOOP IN
20.- AUTOLOOP X 1/2
21.- AUTOLOOP X 2
22.- MANUAL LOOP IN
23.- MANUAL LOOP  OUT / EXIT / RELOOP
24.- MEMORY CUE / LOOP
25.- DEL CUE / LOOP
26.- BEND (WHEEL)
27.- SCRATCH  (WHEEL)
28.- NEEDLE SEARCH
29.- ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS)
30.- DECK´S VOLUMEN CONTROLS AND CROSSFADER
31.- PFL
32.- HEADPHONES VOLUMEN
33.- LOAD DECK
34.- SAMPLER VOLUMEN

PAD MODE DETAIL

DJ ProMixer Pioneer DDJ-RX PAD Mode Detail

35.- MEMORY CUE / LOOP SELECTOR (HOT CUE SELECTOR)
36.- AUTOLOOP (FROM 1/4 TO 32 BEATS) (ROLL SELECTOR)
37.- SAMPLER (SAMPLER SELECTOR)

info mapping                    info PDF

Pioneer DDJ – RZ

HOW TO SET UP?

The system must recognize your Pioneer DDJ-RZ as Audio and MIDI Device before configuring in DJ ProMixer.
Pioneer DDJ-RZ only requires download and install Pioneer DDJ RZ ASIO Driver.

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Pioneer DDJ-RZ as Audio Sound Card.

AUDIO SETTINGS

Pioneer DDJ-RZ ASIO

Pioneer DDJ-RZ_audio_connections

 

For Internal Mode choose your output (1.- for XLR connectors or 2.- for RCA)

Important: Pioneer DDJ –RZ is designed to be used as internal mode (with internal Sound Card), but you can use also with DJ ProMixer as external mode (with other/s Sound Card/s and external mixer).

MIDI CONFIGURATION

Pioneer DDJ-RZ MIDI

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (DDJ-RZ MID) and select on the right side PIONEER DDJ-RZ.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

DJ ProMixer Pioneer DDJ-RZ map

 DETAIL

Dj ProMixer Pioneer DDJ-RZ map detail

1.-   PLAY / PAUSE
2.-   CUE
3.-   SYNC
4.-   SHIFT
5.-   REVERSE
6.-   BRAKE
6.-   (SHIFT +) ENABLE / DISABLE VINYL MODE (BY HARDWARE)
7.-   FX 1 (ECHO)
8.-   FX 2 (FLANGER)
9.-   FX 3 (WAH)
10.- FX DRY / WET
11.- FX PARAMETER
12.- FX ECHO SYNC (FROM 2/1 TO 1/8 BEATS)
13.- TRACKLIST SCROLL / LOAD DECK
14.- CHANGE FOCUS TREE / TRACKLIST
15.- CHANGE FOCUS PLAYLIST / GROUPS-SUBGROUPS / EXPLORER
16.- KEYLOCK
17.- (SHIFT +) TEMPO RANGE (4%, 8%, 10%, 12%, 16%, 32%)
18.- PITCH
19.- AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS) PUSH: AUTO IN  EXIT / RELOOP IN
20.- AUTOLOOP X 1/2
21.- AUTOLOOP X 2
22.- MANUAL LOOP IN
23.- MANUAL LOOP  OUT / EXIT / RELOOP
24.- MEMORY CUE / LOOP
25.- DEL CUE / LOOP
26.- BEND (WHEEL)
27.- SCRATCH  (WHEEL)
28.- NEEDLE SEARCH
29.- ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS)
30.- DECK´S VOLUMEN CONTROLS AND CROSSFADER
31.- PFL
32.- HEADPHONES VOLUMEN

PAD MODE DETAIL

DJ ProMixer Pioneer DDJ-RZ map PAD Mode

33.- MEMORY CUE / LOOP SELECTOR (HOT CUE SELECTOR)
34.- AUTOLOOP (FROM 1/4 TO 32 BEATS) (ROLL SELECTOR)
35.- SAMPLER (SAMPLER SELECTOR)

info mapping                    info PDF

Pioneer DDJ – SB 2

HOW TO SET UP?

The system must recognize your Pioneer DDJ-SB 2 as Audio and MIDI Device before configuring in DJ ProMixer.
Pioneer DDJ-SB 2 only requires download and install Pioneer DDJ SB 2 ASIO Driver.

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Pioneer DDJ-SB 2 as Audio Sound Card.

AUDIO SETTINGS

Pioneer DDJ-SB 2 ASIO

Important: Pioneer DDJ –SB 2 is designed to be used as internal mode (with internal Sound Card), but you can use also with DJ ProMixer as external mode (with other/s Sound Card/s and external mixer).

MIDI CONFIGURATION

Pioneer DDJ-SB 2 MIDI

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (DDJ-SB 2 MID) and select on the right side PIONEER DDJ-SB2.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

Pioneer DDJ-SB 2 Map

 DETAIL

Pioneer DDJ-SB 2 Map Detail

1.-   PLAY / PAUSE
2.-   CUE
3.-   SYNC
4.-   SHIFT
5.-   VINYL MODE
6.-   (SHIFT +) BRAKE
7.-   FX 1 (ECHO)
8.-   FX 2 (FLANGER)
9.-   FX 3 (WAH)
10.- FX DRY WET
11.- (SHIFT +) FX PARAMETER
12.- PITCH
13.- KEYLOCK
14.- (SHIFT +) TEMPO RANGE (4%, 8%, 10%, 12%, 16%, 32%)
15.- TRACKLIST SCROLL
16.- SCROLL (PUSH): CHANGE FOCUS TREE / TRACKLIST
17.- SHIFT + SCROLL (PUSH): (SHIFT + PUSH) OPEN PLAYLIST
18.- LOAD DECK
19.- HEADPHONES VOLUMEN
20.- PFL
21.- EQ. ROTARY KNOBS (HI, MID,BASS) + GAIN

22.- DECK´S VOLUMEN CONTROLS AND CROSSFADER
 

PAD MODE DETAIL

DJ ProMixer Pioneer DDJ-SB_PAD_Mode_Detail

IMPORTANT: PAD TRANS BUTTON MUST BE ENABLED (ON)

23.- MEMORY CUE / LOOP SELECTOR (HOT CUE SELECTOR)
NOTHING SELECTED: CUE/LOOP 1, CUE/LOOP 2, CUE/LOOP 3, CUE/LOOP 4.
SHIFT +: CUE/LOOP 5, CUE/LOOP 6, MEMO, DEL
24.- AUTOLOOP (FROM 1/4 TO 32 BEATS) (ROLL SELECTOR)
AUTOLOOP 1/2, AUTOLOOP (IN 4 BEATS) EXIT/RELOOP, AUTOLOOP X 2
25.- MANUAL LOOP (MANUAL LOOP SELECTOR)
LOOP IN, LOOP OUT, LOOP EXIT/RELOOP
26.- SAMPLER (SAMPLER SELECTOR)
NOTHING SELECTED: SAMPLE 1, SAMPLE 2, SAMPLE 3, SAMPLE 4
SHIFT + : SAMPLE 5, SAMPLE 6

info mapping                    info PDF

Hercules DJ Console RMX 2

HOW TO SET UP?

The system must recognize your Hercules DJ Console RMX 2 as Audio and MIDI device before configuring in DJ ProMixer.

Hercules DJ Console RMX 2 only requires download and install Hercules ASIO Driver, once installed you can configure it in DJ ProMixer.

CONFIGURATION

Hercules DJ Console RMX 2 has two different set up (for Internal or External Mode):

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Hercules DJ Console RMX 2 as Audio Sound Card.

AUDIO SETTINGS

INTERNAL MODE (Master + Headphones)

DJ ProMixer ASIO Hercules DJ Console RMX 2_1

DJ ProMixer Hercules DJ Console RMX 2 Audio Connections_1

For Internal Mode choose your output: 1.-  ¼ TSR connectors (balanced)  or 2.- (Booth) RCA (unbalanced).

Connect your headphones in front ( ¼ TSR stereo connector).

EXTERNAL MODE (Deck A + Deck B connected to external mixer)

DJ ProMixer ASIO Hercules DJ Console RMX 2_2

DJ ProMixer Hercules DJ Console RMX 2 Audio Connections_2

For External Mode choose your outputs: Deck 1.- (1) ¼ TSR connectors (balanced)  or (2).-(Booth) RCA (unbalanced) Deck 2.-  (3).- RCA (unbalanced)

Important: Hercules DJ Console RMX 2 is designed to be used as internal mode (with internal Sound Card using master output  & headphones) or external mode (using the internal soundcard for each deck).

MIDI SET UP

DJ ProMixer MIDI Hercules DJ Console RMX 2

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (DJ CONSOLE RMX20) and select on the right side HERCULES DJ CONSOLE DJ CONSOLE RMX 2.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

Overview

DJ ProMixer Hercules DJ Console RMX 2 map

Detail

DJ ProMixer Hercules DJ Console RMX 2 map detail

1.-   PLAY / PAUSE
2.-   CUE
3.-   SYNC
4.-   PITCH
5.-   BEND (BUTTONS)
6.-   MODE SELECTOR: (7) MEMORY CUE/LOOP – (8) SAMPLER – (9) FX – (10) LOOP (AUTO/MANUAL
7.-   MEMORY CUE/LOOP SELECTED: PAD 1 – CUE/LOOP 1, PAD 2 – CUE/LOOP 2, PAD 3 – CUE-LOOP 3, PAD 4 – CUE-LOOP 4
8.-   SAMPLER SELECTED: PAD 1 – SAMPLE 1, PAD 2 – SAMPLE 2, PAD 3 – SAMPLE 3, PAD 4 – SAMPLE 4
9.-   FX SELECTED: PAD 1 – FX 1 (ECHO), PAD 2 – FX 2 (FLANGER), PAD 3 – FX 3 (WAH)
10.- LOOP SELECTED:

PAD 1 – 1/2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
PAD 2 – X2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
PAD 3 – MANUAL LOOP: IN
PAD 4 – MANUAL LOOP: OUT / EXIT / RELOOP
11.- MOVE WITH ACTIVE FUNCTION (CUE/LOOP MEMORY  OR ACTIVE AUTO LOOP)
12.- FX DRY / WET
13.- BEND (WHEEL
14.- SCRATCH
15.- KILL (EQ. TREBLE)
16.- KILL (EQ. MID)
17.- KILL (EQ. BASS)
18.- FOLDER-TREE SELECTOR / OPEN CLOSE
19
.- TRACKLIST SELECTOR
20.- TRACKLIST MOVE UP
21.- TRACKLIST MOVE DOWN

22.- LOAD DECK
23.- PFL
24.- VINYL MODE
25-  ROTARY KNOBS OF THE MIXER (EQ HI, MID,BASS), GAIN
26.- DECK´S VOLUMEN CONTROLS AND CROSSFADE

info mapping                    info PDF

Hercules DJ Console 4Mx

HOW TO SET UP?

The system must recognize your Hercules DJ Console 4 Mx as Audio and MIDI device before configuring in DJ ProMixer.

Hercules DJ Console 4 Mx only requires download and install Hercules ASIO Driver, once installed you can configure it in DJ ProMixer.

CONFIGURATION

Hercules DJ Console 4 Mx has two different set up (for Internal or External Mode):

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Hercules DJ Console 4 Mx as Audio Sound Card.

AUDIO SETTINGS

INTERNAL MODE (Master + Headphones)

DJ ProMixer ASIO Hercules DJ 4Set

 DJ ProMixer Hercules DJ Console 4 Mx Audio Connections 1

For Internal Mode choose your output: 1.-  ¼ TSR connectors (balanced)  or 2.- RCA (unbalanced).

Connect your headphones in front ( ¼ TSR stereo connector).

EXTERNAL MODE (Deck A + Deck B connected to external mixer)

DJ ProMixer ASIO Hercules DJ 4Set Multi Channel External Mixer

DJ ProMixer Hercules DJ Console 4 Mx Audio Connections 2

For External Mode choose your outputs: Deck 1.- (1) ¼ TSR connectors (balanced)  or (2).- RCA (unbalanced) Deck 2.-  (3) ¼ TSR connectors (balanced)  or (4).- RCA (unbalanced)

Important: Hercules DJ Console 4 Mx is designed to be used as internal mode (with internal Sound Card using master output  & headphones) or external mode (using the internal soundcard for each deck).

MIDI SET UP

DJ Promixer MIDI Hercules DJ Console 4 Mx

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (HERCULES DJ CONSOLE 4 MX MID0) and select on the right side HERCULES DJ CONSOLE 4 MX.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

Overview

DJ ProMixer Hercules DJ Console 4 Mx map

Detail

DJ ProMixer Hercules DJ Console 4 Mx map detail

 

1.-   PLAY / PAUSE
2.-   CUE
3.-   SYNC
4.-   PITCH
5.-   BEND (BUTTONS)
6.-   SHIFT SELECTOR
7.-   1/2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
7.-   (SHIFT ENABLED) MEMORY CUE / LOOP 1
8.-   X2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
8.-   (SHIFT ENABLED) MEMORY CUE / LOOP 2
9.-   MANUAL LOOP: IN
9.-   (SHIFT ENABLED) MEMORY CUE / LOOP 3
10.- MANUAL LOOP: OUT / EXIT / RELOOP
10.- (SHIFT ENABLED) MEMORY CUE / LOOP 4
11.- FX 1: ECHO
11.- (SHIFT ENABLED) SAMPLE 1
12.- FX 2: FLANGER
12.- (SHIFT ENABLED) SAMPLE 2
13.- MOVE WITH ACTIVE FUNCTION (CUE/LOOP MEMORY  OR ACTIVE AUTO LOOP)
14.- FX DRY / WET
15.- KEYLOCK
16.- CHANGE TEMPO RANGE (4%, 8%, 10%, 12%, 16%, 32%)
17.- BEND (WHEEL)
18.- SCRATCH
19.- FOLDER-TREE SELECTOR / OPEN CLOSE
20.- TRACKLIST SELECTOR
21.- TRACKLIST MOVE UP
22.- TRACKLIST MOVE DOWN

23.- LOAD DECK
24.- PFL
25.- KILL (EQ. TREBLE)
26.- KILL (EQ. MID)
27.- KILL (EQ. BASS)
28.- VINYL MODE
29-   ROTARY KNOBS OF THE MIXER (EQ HI, MID,BASS), GAIN
30.-  DECK´S VOLUMEN CONTROLS AND CROSSFADER

info mapping                    info PDF

Akiyama Quark / SC

HOW TO SET UP?

The system must recognize your Akiyama Quark as Audio Device (only Quark SC) and MIDI Device (for booth models) before configuring in DJ ProMixer.

CONFIGURATION

Akiyama Quark SC has two different audio set up (for Internal or External Mode):

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Akiyama Quark SC as Audio Sound Card.

AUDIO SETTINGS

INTERNAL MODE (Master + Headphones)

DJ ProMixer Audio Internal Akiyama Quark SC

 DJ ProMixer Akiyama Quark Audio Connections Internal

For Internal Mode connect your output in (1) RCA  connectors (L+R) for Master Output.

Connect your headphones in front ( ¼ TSR stereo connector).

EXTERNAL MODE (Deck A + Deck B connected to external mixer)

DJ ProMixer Audio External Akiyama Quark SC

DJ ProMixer Akiyama Quark Audio Connections External

For External Mode connect your outputs 1.- RCA  connectors (L+R) for Deck A, and  2.- RCA connectors (L+R) for Deck B.

Important: Akiyama Quark SC is designed to be used as internal mode (with internal Sound Card using master output  & headphones) or external mode (using the internal soundcard for each deck).

Akiyama Quark have not soundcard, it´s only MIDI Controller.

MIDI SET UP

DJ ProMixer MIDI Akiyama Quark SC

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (Quark0 / Quark SC0) and select on the right side AKIYAMA QUARK SC.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

Overview

DJ ProMixer Akiyama Quark map

(Click to enlarge)

Detail

DJ ProMixer Akiyama Quark map detail

1.-   PLAY / PAUSE
2.-   CUE
3.-   SYNC
4.-   MANUAL LOOP: IN / OUT / EXIT-RELOOP
5.-   AUTO LOOP FROM ¼ TO 32 BEATS (IN – STARTS 4 BEATS, EXIT, RELOOP)
6.-   MEMORIZE CUE / LOOP
7.-   FX DRY / WET
8.-   FX PARAMETER
9.-   FX ECHO SYNC (FROM 2/1 TO 1/8 BEATS)
10.- FX 1: ECHO
11.- FX 2: FLANGER
12.- FX 3: WAH
13.- VINYL MODE
14.- PITCH
15.- BEND (BUTTONS)
16.- MULTISELECTOR: NOTHING SELECTED (LIGHT OFF): MEMORY CUE / LOOP DIRECT BUTTONS (1, 2, 3, 4, 5, 6)
17.- MULTISELECTOR: 1 PUSH (ORANGE LIGHT) SAMPLER DIRECT BUTTONS (1, 2, 3, 4, 5, 6)
18.- MULTISELECTOR: SECOND PUSH (GREEN LIGHT) AUTO LOOP DIRECT BUTTONS (1/4, 1/2, 1, 2, 4, 8 BEATS)
19.- BEND (WHEEL)
20.- SCRATCH
21.- LOAD DECKS
22.- PFL
23.- CHANGE FOCUS TREE / TRACKLIST
24.- TRACKLIST SCROLL
25.- ROTARY KNOBS OF THE MIXER (EQ HI, MID,BASS +PUSH KILL), GAIN
26.- DECK´S VOLUMEN CONTROLS AND CROSSFADER

info mapping                    info PDF

Akai AMX

HOW TO SET UP?

The system must recognize your Akai AMX as Audio and MIDI Device before configuring in DJ ProMixer.
Akai AMX only requires download and install Akai AMX ASIO Driver.

Driver Akai AMXOpen DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Akai AMX as Audio Sound Card.

AUDIO SETTINGS

DJ ProMixer ASIO Akai AMX 

MIDI CONFIGURATION

 DJ ProMixer MIDI Akai AMX

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (AMX MID) and select on the right side AKAI AMX.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

HOW TO SET UP Akai AMX with Akai AFX?

MIDI MAP

DJ ProMixer Akai AMX map

1.-   PLAY / PAUSE
2.-   CUE
3.-   SYNC
4.-   CHANGE FOCUS TREE / TRACKLIST
5.-   TRACKLIST SCROLL / PUSH
6.-   CHANGE FOCUS PLAYLIST / GROUPS-SUBGROUPS / EXPLORER
7.-   LOAD DECK
8.-   (SHIFT +) FX 1 (ECHO)
9.-   GAIN
10.- (SHIFT +) PITCH
11.- EQ. TREBLE
12.- EQ. MID
13.- EQ. BASS
14.- FX PARAMETER
15.- HEADPHONES VOLUMEN
16.- PFL
17.- SHIFT
18.- DECK´S VOLUMEN CONTROLS AND CROSSFADER

info mapping                    info PDF

Pioneer XDJ – Aero

HOW TO SET UP?

The system must recognize your Pioneer XDJ-Aero as Audio and MIDI Device before configuring in DJ ProMixer.
Pioneer XDJ-Aero only requires download and install Pioneer XDJ-Aero ASIO Driver.

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Pioneer XDJ-Aero as Audio Sound Card.

AUDIO SETTINGS

DJ ProMixer Pioneer XDJ-Aero Audio

DJ ProMixer Pioneer XDJ-Aero Audio connections
For Internal Mode choose your output (1.- for 1/4 TRS connectors or 2.- for RCA)

Important: Pioneer XDJ-Aero is designed to be used as internal mode (with internal Sound Card), but you can use also with DJ ProMixer as external mode (with other/s Sound Card/s and external mixer).

MIDI CONFIGURATION

 DJ ProMixer Pioneer XDJ-Aero MIDI

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (XDJ-Aero MID) and select on the right side PIONEER XDJ-Aero.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP
DJ ProMixerPioneer XDJ-Aero map

 DETAIL

 DJ ProMixer Pioneer XDJ-Aero map detail_2

1.-   PLAY / PAUSE
2.-   CUE
3.-   SHIFT
4-    AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS) PUSH: AUTO IN  EXIT / RELOOP IN
5.-   FX ECHO SYNC (FROM 2/1 TO 1/8 BEATS)
6.-   EFFECTS DIRECT BUTTONS: FX 1, FX2, FX 3
7.-   SAMPLES DIRECT BUTTONS (1, 2, 3, 4) (WITH SAMPLER SELECTOR ACTIVE)
8.-   SAMPLER SELECTOR
9.-   FX DRY / WET
10.- (SHIFT +) FX PARAMETER
11.- (SHIFT +) CUE / LOOP MEMORY (4 DIRECT BUTTONS: 1, 2, 3, 4)
12.- (SHIFT +) TEMPO RANGE (4%, 8%, 10%, 12%, 16%, 32%)
13.- KEYLOCK
14.- SYNC
15.- SCROLL / LOAD / ENTER
16.- CHANGE FOCUS TREE / TRACKLIST
17.- PITCH
18.- BEND (WHEEL)
19.- SCRATCH
20.- REC
21.- PFL
22.- ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS)
23.- AUTOMIX
24.- DECK´S VOLUMEN CONTROLS AND CROSSFADER

info mapping                    info PDF

Pioneer XDJ – R1

HOW TO SET UP?

The system must recognize your Pioneer XDJ-R1 as Audio and MIDI Device before configuring in DJ ProMixer.
Pioneer XDJ-R1 only requires download and install Pioneer XDJ-R1 ASIO Driver.

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Pioneer XDJ-R1 as Audio Sound Card.

AUDIO SETTINGS

DJ ProMixer ASIO Pioneer XDJ-R1_1

Audio Connection Pioneer XDJ-R1
For Internal Mode choose your output (1.- for XLR connectors or 2.- for RCA)

Important: Pioneer XDJ-R1 is designed to be used as internal mode (with internal Sound Card), but you can use also with DJ ProMixer as external mode (with other/s Sound Card/s and external mixer).

MIDI CONFIGURATION

DJ ProMixer MIDI Pioneer XDJ-R1

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (XDJ-R1 MID) and select on the right side PIONEER XDJ-R1.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP
DJ Promixer Pioneer XDJ-R1 map

 DETAIL

 DJ ProMixer Pioneer XDJ-R1 map detail

1.-   PLAY / PAUSE
2.-   CUE
3.-   SHIFT
4.-   SEARCH CUE / LOOP POINT
5.-   AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS) PUSH: AUTO IN  EXIT / RELOOP IN
6.-   EFFECTS DIRECT BUTTONS: FX 1, FX2, FX 3
7.-   FX DRY / WET
8.-   (SHIFT +) FX PARAMETER
9.-   FX SYNC (FROM 2/1 TO 1/8 BEATS)
10.- BRAKE
11.- (SHIFT +) TEMPO RANGE (4%, 8%, 10%, 12%, 16%, 32%)
12.- KEYLOCK
13.- PITCH
14.- SYNC
15.- CUE / LOOP MEMORY (3 DIRECT BUTTONS: 1, 2, 3)
16.- (+ SHIFT) SAMPLER DIRECT BUTTONS (1, 2, 3)
17.- MEMORIZE CUE /LOOP
18.- CHANGE FOCUS TREE / TRACKLIST
19.- SCROLL / LOAD / ENTER
20.- BEND
21.- SCRATCH
22.- PFL
23.- HEADPHONES VOLUMEN
24.- ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS)
25.- DECK´S VOLUMEN CONTROLS AND CROSSFADER

info mapping                    info PDF

Pioneer DDJ – SB

HOW TO SET UP?

The system must recognize your Pioneer DDJ-SB as Audio and MIDI Device before configuring in DJ ProMixer.
Pioneer DDJ-SB only requires download and install Pioneer DDJ SB ASIO Driver.

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Pioneer DDJ-SB as Audio Sound Card.

AUDIO SETTINGS

DJ ProMixer Pioneer DDJ-SB ASIO

Important: Pioneer DDJ –SB is designed to be used as internal mode (with internal Sound Card), but you can use also with DJ ProMixer as external mode (with other/s Sound Card/s and external mixer).

MIDI CONFIGURATION

 DJ ProMixer Pioneer DDJ-SB MIDI

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (DDJ-SB MID) and select on the right side PIONEER DDJ-SB.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

DJ ProMixer Pioneer DDJ-SB_Map

 DETAIL

 DJ ProMixer Pioneer DDJ-SB_Map_Detail

1.-   PLAY / PAUSE
2.-   CUE
3.-   SYNC
4.-   SHIFT
5.-   VINYL MODE
6.-   (SHIFT +) BRAKE
7.-   FX 1 (ECHO)
8.-   FX 2 (FLANGER)
9.-   FX 3 (WAH)
10.- FX DRY WET
11.- (SHIFT +) FX PARAMETER
12.- PITCH
13.- KEYLOCK
14.- (SHIFT +) TEMPO RANGE (4%, 8%, 10%, 12%, 16%, 32%)
15.- TRACKLIST SCROLL
16.- CHANGE FOCUS TREE / TRACKLIST
17.- (SHIFT +) CHANGE FOCUS PLAYLIST / GROUPS-SUBGROUPS / EXPLORER
18.- LOAD DECK
19.- HEADPHONES VOLUMEN
20.- PFL
21.- EQ. ROTARY KNOBS (HI, MID,BASS)

22.- DECK´S VOLUMEN CONTROLS AND CROSSFADER
 

PAD MODE DETAIL

DJ ProMixer Pioneer DDJ-SB_PAD_Mode_Detail

23.- MEMORY CUE / LOOP SELECTOR (HOT CUE SELECTOR)
NOTHING SELECTED: CUE/LOOP 1, CUE/LOOP 2, CUE/LOOP 3, CUE/LOOP 4.
SHIFT +: CUE/LOOP 5, CUE/LOOP 6, MEMO, DEL
24.- AUTOLOOP (FROM 1/4 TO 32 BEATS) (ROLL SELECTOR)
AUTOLOOP 1/2, AUTOLOOP (IN 4 BEATS) EXIT/RELOOP, AUTOLOOP X 2
25.- MANUAL LOOP (MANUAL LOOP SELECTOR)
LOOP IN, LOOP OUT, LOOP EXIT/RELOOP
26.- SAMPLER (SAMPLER SELECTOR)
NOTHING SELECTED: SAMPLE 1, SAMPLE 2, SAMPLE 3, SAMPLE 4
SHIFT + : SAMPLE 5, SAMPLE 6

info mapping                    info PDF

Pioneer DDJ – SR

HOW TO SET UP?

The system must recognize your Pioneer DDJ-SR as Audio and MIDI Device before configuring in DJ ProMixer.
Pioneer DDJ-SR only requires download and install Pioneer DDJ SR ASIO Driver.

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Pioneer DDJ-SR as Audio Sound Card.

AUDIO SETTINGS

DJ ProMixer Pioneer DDJ-SR ASIO

DJ ProMixer Pioneer DDJ-SR Audio Connection For Internal Mode choose your output (1.- for TRS connectors or 2.- for RCA)

Important: Pioneer DDJ –SR is designed to be used as internal mode (with internal Sound Card), but you can use also with DJ ProMixer as external mode (with other/s Sound Card/s and external mixer).

MIDI CONFIGURATION

 DJ ProMixer Pioneer DDJ-SR MIDI

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (DDJ-SR MID) and select on the right side PIONEER DDJ-SR.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

DJ ProMixer Pioneer DDJ-SR_map

 DETAIL

 DJ Promixer Pioneer DDJ-SR_map_detail

1.-   PLAY / PAUSE
2.-   CUE
3.-   SYNC
4.-   SHIFT
5.-   VINYL MODE
6.-   BRAKE
7.-   FX 1 (ECHO)
8.-   FX 2 (FLANGER)
9.-   FX 3 (WAH)
10.- FX DRY / WET
11.- FX PARAMETER
12.- FX ECHO SYNC (FROM 2/1 TO 1/8 BEATS)
13.- TRACKLIST SCROLL
14.- CHANGE FOCUS TREE / TRACKLIST
15.- CHANGE FOCUS PLAYLIST / GROUPS-SUBGROUPS / EXPLORER
16.- KEYLOCK
17.- TEMPO RANGE (4%, 8%, 10%, 12%, 16%, 32%)
18.- PITCH
19.- AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS) PUSH: AUTO IN  EXIT / RELOOP IN
20.- AUTOLOOP X 1/2
21.- AUTOLOOP X 2
22.- MEMORY CUE / LOOP
23.- DEL CUE / LOOP
24.- BEND (WHEEL)
25.- SCRATCH  (WHEEL)
26.- LOAD DECK
27.- HEADPHONES VOLUMEN
28.- SAMPLER VOLUMEN
29.- ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS)
30.- PFL
30.- DECK´S VOLUMEN CONTROLS AND CROSSFADER
31.- PFL 

PAD MODE DETAIL

DJ Promixer Pioneer DDJ-SR_PAD Mode Detail

32.- MEMORY CUE / LOOP SELECTOR (HOT CUE SELECTOR)
33.- AUTOLOOP (FROM 1/4 TO 32 BEATS) (ROLL SELECTOR)
34.- SAMPLER (SAMPLER SELECTOR)

info mapping                    info PDF

Pioneer DDJ – SX

HOW TO SET UP?

The system must recognize your Pioneer DDJ-SX as Audio and MIDI Device before configuring in DJ ProMixer.
Pioneer DDJ-SX only requires download and install Pioneer DDJ SX ASIO Driver.

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Pioneer DDJ-SX as Audio Sound Card.

AUDIO SETTINGS

DJ ProMixer Pioneer DDJ-SX Audio_ASIO

DJ ProMixer Pioneer DDJ-SX2_audio connection

For Internal Mode choose your output (1.- for XLR connectors or 2.- for RCA)

Important: Pioneer DDJ –SX is designed to be used as internal mode (with internal Sound Card), but you can use also with DJ ProMixer as external mode (with other/s Sound Card/s and external mixer).

MIDI CONFIGURATION

 DJ ProMixer Pioneer DDJ-SX _MIDI

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (DDJ-SX MID) and select on the right side PIONEER DDJ-SX.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

DJ ProMixer Pioneer DDJ-SX_map

 DETAIL

 DJ Promixer Pioneer DDJ-SX_map_detail

1.-   PLAY / PAUSE
2.-   CUE
3.-   SYNC
4.-   SHIFT
5.-   REVERSE
6.-   BRAKE
7.-   FX 1 (ECHO)
8.-   FX 2 (FLANGER)
9.-   FX 3 (WAH)
10.- FX DRY / WET
11.- FX PARAMETER
12.- FX ECHO SYNC (FROM 2/1 TO 1/8 BEATS)
13.- TRACKLIST SCROLL
14.- CHANGE FOCUS TREE / TRACKLIST
15.- CHANGE FOCUS PLAYLIST / GROUPS-SUBGROUPS / EXPLORER
16.- KEYLOCK
17.- (SHIFT +) TEMPO RANGE (4%, 8%, 10%, 12%, 16%, 32%)
18.- PITCH
19.- AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS) PUSH: AUTO IN  EXIT / RELOOP IN
20.- AUTOLOOP X 1/2
21.- AUTOLOOP X 2
22.- MANUAL LOOP IN
23.- MANUAL LOOP  OUT / EXIT / RELOOP
24.- MEMORY CUE / LOOP
25.- DEL CUE / LOOP
26.- BEND (WHEEL)
27.- SCRATCH  (WHEEL)
28.- NEEDLE SEARCH
29.- ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS)
30.- DECK´S VOLUMEN CONTROLS AND CROSSFADER
31.- PFL
32.- HEADPHONES VOLUMEN
33.- LOAD DECK
34.- SAMPLER VOLUMEN
35.- VINYL MODE 

PAD MODE DETAIL

DJ ProMixer Pioneer DDJ-SX PAD Mode Detail

36.- MEMORY CUE / LOOP SELECTOR (HOT CUE SELECTOR)
37.- AUTOLOOP (FROM 1/4 TO 32 BEATS) (ROLL SELECTOR)
38.- SAMPLER (SAMPLER SELECTOR)

info mapping                    info PDF

Pioneer DDJ – SX2

HOW TO SET UP?

The system must recognize your Pioneer DDJ-SX2 as Audio and MIDI Device before configuring in DJ ProMixer.
Pioneer DDJ-SX2 only requires download and install Pioneer DDJ SX2 ASIO Driver.

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Pioneer DDJ-SX2 as Audio Sound Card.

AUDIO SETTINGS

DJ ProMixer Pioneer DDJ-SX2_ASIO

DJ ProMixer Pioneer DDJ-SX2_audio connection

For Internal Mode choose your output (1.- for XLR connectors or 2.- for RCA)

Important: Pioneer DDJ –SX2 is designed to be used as internal mode (with internal Sound Card), but you can use also with DJ ProMixer as external mode (with other/s Sound Card/s and external mixer).

MIDI CONFIGURATION

 DJ ProMixer Pioneer DDJ-SX2_MIDI

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (DDJ-SX2 MID) and select on the right side PIONEER DDJ-SX2.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

DJ ProMixer Pioneer DDJ-SX2_map

 DETAIL

 DJ ProMixer Pioneer DDJ-SX2_map_detail

1.-   PLAY / PAUSE
2.-   CUE
3.-   SYNC
4.-   SHIFT
5.-   REVERSE
6.-   BRAKE
6.-   (SHIFT +) ENABLE / DISABLE VINYL MODE (BY HARDWARE)
7.-   FX 1 (ECHO)
8.-   FX 2 (FLANGER)
9.-   FX 3 (WAH)
10.- FX DRY / WET
11.- FX PARAMETER
12.- FX ECHO SYNC (FROM 2/1 TO 1/8 BEATS)
13.- TRACKLIST SCROLL
14.- CHANGE FOCUS TREE / TRACKLIST
15.- CHANGE FOCUS PLAYLIST / GROUPS-SUBGROUPS / EXPLORER
16.- KEYLOCK
17.- (SHIFT +) TEMPO RANGE (4%, 8%, 10%, 12%, 16%, 32%)
18.- PITCH
19.- AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS) PUSH: AUTO IN  EXIT / RELOOP IN
20.- AUTOLOOP X 1/2
21.- AUTOLOOP X 2
22.- MANUAL LOOP IN
23.- MANUAL LOOP  OUT / EXIT / RELOOP
24.- MEMORY CUE / LOOP
25.- DEL CUE / LOOP
26.- BEND (WHEEL)
27.- SCRATCH  (WHEEL)
28.- NEEDLE SEARCH
29.- ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS)
30.- DECK´S VOLUMEN CONTROLS AND CROSSFADER
31.- PFL
32.- HEADPHONES VOLUMEN
33.- LOAD DECK
34.- SAMPLER VOLUMEN 

PAD MODE DETAIL

DJ ProMixer Pioneer DDJ-SX2_PAD_mode_detail

35.- MEMORY CUE / LOOP SELECTOR (HOT CUE SELECTOR)
36.- AUTOLOOP (FROM 1/4 TO 32 BEATS) (ROLL SELECTOR)
37.- SAMPLER (SAMPLER SELECTOR)

info mapping                    info PDF

Pioneer DDJ – SZ

HOW TO SET UP?

The system must recognize your Pioneer DDJ-SZ as Audio and MIDI Device before configuring in DJ ProMixer.
Pioneer DDJ-SZ only requires download and install Pioneer DDJ SZ ASIO Driver.

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Pioneer DDJ-SZ as Audio Sound Card.

AUDIO SETTINGS

DJ ProMixer Pioneer DDJ-SZ ASIO

DJ ProMixer Pioneer DDJ-SZ_audio_connections

For Internal Mode choose your output (1.- for XLR connectors or 2.- for RCA)

Important: Pioneer DDJ –SZ is designed to be used as internal mode (with internal Sound Card), but you can use also with DJ ProMixer as external mode (with other/s Sound Card/s and external mixer).

MIDI CONFIGURATION

 DJ ProMixer Pioneer DDJ-SZ MIDI

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (DDJ-SZ MID) and select on the right side PIONEER DDJ-SZ.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

DJ ProMixer Pioneer DDJ-SZ_map

 DETAIL

 DJ ProMixer Pioneer DDJ-SZ_map_detail

1.-   PLAY / PAUSE
2.-   CUE
3.-   SYNC
4.-   SHIFT
5.-   REVERSE
6.-   BRAKE
6.-   (SHIFT +) ENABLE / DISABLE VINYL MODE (BY HARDWARE)
7.-   FX 1 (ECHO)
8.-   FX 2 (FLANGER)
9.-   FX 3 (WAH)
10.- FX DRY / WET
11.- FX PARAMETER
12.- FX ECHO SYNC (FROM 2/1 TO 1/8 BEATS)
13.- TRACKLIST SCROLL / LOAD DECK
14.- CHANGE FOCUS TREE / TRACKLIST
15.- CHANGE FOCUS PLAYLIST / GROUPS-SUBGROUPS / EXPLORER
16.- KEYLOCK
17.- (SHIFT +) TEMPO RANGE (4%, 8%, 10%, 12%, 16%, 32%)
18.- PITCH
19.- AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS) PUSH: AUTO IN  EXIT / RELOOP IN
20.- AUTOLOOP X 1/2
21.- AUTOLOOP X 2
22.- MANUAL LOOP IN
23.- MANUAL LOOP  OUT / EXIT / RELOOP
24.- MEMORY CUE / LOOP
25.- DEL CUE / LOOP
26.- BEND (WHEEL)
27.- SCRATCH  (WHEEL)
28.- NEEDLE SEARCH
29.- ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS)
30.- DECK´S VOLUMEN CONTROLS AND CROSSFADER
31.- PFL
32.- HEADPHONES VOLUMEN

PAD MODE DETAIL

DJ ProMixer Pioneer DDJ-SZ_map_PAD_Mode

33.- MEMORY CUE / LOOP SELECTOR (HOT CUE SELECTOR)
34.- AUTOLOOP (FROM 1/4 TO 32 BEATS) (ROLL SELECTOR)
35.- SAMPLER (SAMPLER SELECTOR)

info mapping                    info PDF

Pioneer DDJ – S1

HOW TO SET UP?

The system must recognize your Pioneer DDJ-S1 as Audio and MIDI Device before configuring in DJ ProMixer.
Pioneer DDJ-S1 only requires download and install Pioneer DDJ ASIO Driver.

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Pioneer DDJ-S1 as Audio Sound Card.

AUDIO SETTINGS

DJ ProMixer ASIO Pioneer DDJ S1

For Internal Mode choose your output (1.- for XLR connectors or 2.- for RCA)

Important: Pioneer DDJ –S1 is designed to be used as internal mode (with internal Sound Card), but you can use also with DJ ProMixer as external mode (with other/s Sound Card/s and external mixer).

MIDI CONFIGURATION

DJ ProMixer MIDI Pioneer DDJ-S1

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (DDJ-S1 MID) and select on the right side PIONEER DDJ-S1.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

DJ ProMixer Pioneer_DDJ_S1 Map

DETAIL

DJ ProMixer Pioneer_DDJ_S1 Detail

1.-   PLAY / PAUSE
2.-   CUE
3.-   MANUAL LOOP (IN – OUT , EXIT-RELOOP)
4.-   AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS) PUSH: AUTO IN  EXIT / RELOOP IN
5.-   TEMPO RANGE (4%, 8%, 10%, 12%, 16%, 32%)
6.-   KEYLOCK
7.-   EFFECTS DIRECT BUTTONS : (CREATES / BROWSER = FX1, FILES / PREPARE = FX2, ON /     OFF = FX3)
8.-   CUE / LOOP MEMORY (5 DIRECT BUTTONS) 8.- (+ SHIFT) SAMPLER DIRECT BUTTONS (1, 2, 3, 4, 5)
9.-   MEMORY
10.- FX SYNC (FROM 2/1 TO 1/8 BEATS)
11.- FX DRY / WET
12.- FX PARAMETER
13.- REVERSE
14.- TRACKLIST SCROLL
15.- LOAD DECK
16.- REC
17.- PFL
18.- ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS)
19.- DECK´S VOLUMEN CONTROLS AND CROSSFADER
20.- PITCH
21.- SYNC
22.- BEND
23.- SCRATCH
24.- SHIFT
25.- BRAKE
26.- CHANGE FOCUS PLAYLIST / GROUPS-SUBGROUPS / EXPLORER
27.- CHANGE FOCUS TREE / TRACKLIST
28.- NEEDLE SEARCH

info mapping                    info PDF

ION Discover DJ

HOW TO SET UP?

The system must recognize your ION Discover DJ before configuring in DJ ProMixer.

IMPORTANT: ION Discover DJ is a MIDI Device (It has not integrated audio device/s) For audio configuration choose your work mode and audio sound card/s).

 MIDI SET UP

DJ ProMixer Ion Discover DJ MIDI

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (Ion Discover DJ Mid0) and select on the right side ION DISCOVER DJ.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP
Overview

 DJ ProMixer Ion Discover DJ map

Detail

DJ ProMixer Ion Discover DJ map detail

1.-   PLAY / PAUSE
2.-   CUE
3.-   REVERSE
4.-   SYNC
5.-   DECK VOLUMEN
6.-   BASS / TREBLE
7.-   PITCH BEND
8.-   SCROLL
9.-   LOAD
10.- CROSSFADER
11.-  BEND (WHEEL)

info mapping                    info PDF

ION iCUE

HOW TO SET UP?

The system must recognize your ION ICUE before configuring in DJ ProMixer.

IMPORTANT: ION ICUE is a MIDI Device (It has not integrated audio device/s) For audio configuration choose your work mode and audio sound card/s).

 MIDI SET UP

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (Ion ICUE Mid0) and select on the right side ION ICUE.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI Ion ICUE

MIDI MAP
Overview

DJ ProMixer ION ICUEl MIDI map

Detail

DJ ProMixer ION ICUEl MIDI map detail

1.-   PLAY
2.-   PAUSE
3.-   CUE
4.-   PITCH
5.-   SYNC
6.-   KEYLOCK
7.-   SCRATCH
8.-   PFL VOLUMEN (A AND B)
9.-   ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS)
10.- VOLUMEN CONTROLS AND CROSSFADER
11.- VOLUMEN CONTROLS AND CROSSFADER
12.- WHEELS

info mapping                    info PDF

Numark Total Control

HOW TO SET UP?

The system must recognize your Numark Total Control before configuring in DJ ProMixer.
IMPORTANT: Numark Total Control is a MIDI Device (have not integrated audio device/s) For audio configuration choose your work mode and audio sound card/s).

MIDI CONFIGURATION

DJ ProMixer Numark Total Control MIDI

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (Numark TOTAL CONTROL MIDI0) and select on the right side NUMARK TOTAL CONTROL.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

TWO MIDI MAPS

Overview

Numark Total Control MIDI map

Detail

DJ ProMixer Numark Total Control MIDI map detail

1.-   PLAY
2.-   PAUSE
3.-   CUE
4.-   PITCH
5.-   SYNC
6.-   KEYLOCK
7.-   PFL
8.-   MANUAL LOOP (1.- IN  2.- OUT / EXIT / RELOOP)
9.-   PITCH BEND
10.- CHANGE FOCUS TREE / TRACKLIST
11.- SCROLL / LOAD / ENTER
12.- LOAD TRACK
13.- FX DRY / WET
14.- FX PARAMETER
15.- MID MAP 1 AND MIDI MAP 2 – FX – ECHO
16.- MIDI MAP 1 – SCRATCH / MIDI MAP 2 – FX – FLANGER
17.- MIDI MAP 1  FX FLANGER / MIDI MAP 2 – SAMPLER 1
18.- MIDI MAP 1 FX WAH / MIDI MAP 2 – SAMPLER 2
19.- FX ECHO BEAT SYNC
20.- SAMPLER VOLUMEN
21.- PFL VOLUMEN (A AND B)
22.- ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS) / KILL = PUSH (HI, MID, BASS)
23.- VOLUMEN CONTROLS AND CROSSFADER
24.- WHEELS

info mapping                    info PDF

Numark Stealth Control

HOW TO SET UP?

The system must recognize your Numark Stealth Control before configuring in DJ ProMixer.
IMPORTANT: Numark Stealth Control is a MIDI Device (It has not integrated audio device/s) For audio configuration choose your work mode and audio sound card/s).

MIDI CONFIGURATION

DJ ProMixer Numark Stealth Control MIDI

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (Numark OMNI CONTROL MIDI0) and select on the right side NUMARK OMNI CONTROL.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

TWO MIDI MAPS

Overview

DJ ProMixer Numark Stealth Control MIDI map

Detail

Numark Stealth Control MIDI map detail

1.-   PLAY
2.-   PAUSE
3.-   CUE
4.-   PITCH
5.-   SYNC
6.-   KEYLOCK
7.-   PFL
8.-   MANUAL LOOP (1.- IN  2.- OUT / EXIT / RELOOP)
9.-   PITCH BEND
10.- CHANGE FOCUS TREE / TRACKLIST
11.- SCROLL / LOAD / ENTER
12.- LOAD TRACK
13.- FX DRY / WET
14.- FX PARAMETER
15.- MID MAP 1 AND MIDI MAP 2 – FX – ECHO
16.- MIDI MAP 1 – SCRATCH / MIDI MAP 2 – FX – FLANGER
17.- MIDI MAP 1  FX FLANGER / MIDI MAP 2 – SAMPLER 1
18.- MIDI MAP 1 FX WAH / MIDI MAP 2 – SAMPLER 2
19.- FX ECHO BEAT SYNC
20.- SAMPLER VOLUMEN
21.- PFL VOLUMEN (A AND B)
22.- ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS) / KILL = PUSH (HI, MID, BASS)
23.- VOLUMEN CONTROLS AND CROSSFADER
24.- WHEELS

info mapping                    info PDF

Akiyama Kuro / K2

HOW TO SET UP?

The system must recognize your Akiyama Kuro / K2 Device before configuring in DJ ProMixer.

IMPORTANT: Akiyama Kuro / K2 is a MIDI Device (It has not integrated audio device/s) For audio configuration choose your work mode and audio sound card/s).

MIDI CONFIGURATION

Single Mode (2 Akiyama Kuro / K2 Connected)

Akiyama Kuro single mode

Select in MIDI PORT / MIDI MAP 1 on the left side one device (Midi Controller0) and select on the right side AKIYAMA KURO (A OR B).XML. Select in MIDI PORT / MIDI MAP 2 on the left side the other device (Midi Controller1) and select on the right side AKIYAMA KURO (A OR B).XML

Dual Mode

DJ ProMixer Akiyama Kuro Dual Mode

Select in MIDI PORT / MIDI MAP 1 on the left side your Akiyama Kuro / K2 (Midi Controller0) and select on the right side AKIYAMA KURO (A AND B).XML. Nothing selected in MIDI PORT / MIDI MAP 2

How to change the decks? Akiyama Kuro / K2 has two direct buttons to select the deck, also it show at the display as “Player A” or “Player B”, if your devices are inverted (it depens of the system) swap your devices in Config.

Deck selector

MIDI MAP

Akiyama Kuro Map

  1.- PLAY / PAUSE
  2.- CUE
  3.- CUP (CUE & PLAY)
  4.- CHANGE FOCUS PLAYLIST / GROUPS-SUBGROUPS / EXPLORER
  5.- TRACK SCROLL / PUSH (LOAD)
  6.- FOLDER SCROLL / PUSH (OPEN-CLOSE)
  7.- REVERSE
  8.- MANUAL LOOP (IN – OUT – EXIT / RELOOP)
DIRECT AUTO LOOP (IN / EXIT) (STARTS IN 4 BEATS)

  9.- AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
10.- SELECTOR AUTOLOOP (FROM ¼ TO 32 BEATS) / FX ECHO BEAT SYNC (FROM 1/8 TO 2/1) 
11.- SELECTOR AUTOLOOP / FX BEAT << MOVE DOWN / MOVE UP>>
12.- WHEEL MODE (SCRATCH, SEARCH, FX)
13.- CHANGE TEMPO RANGE (4%, 8%, 10%, 12%, 16%, 32%)
14.- KEYLOCK
15.- PITCH

16.- PITCH BEND
17.- SYNC
18.- MEMORIZE CUE / LOOP POINT
19.- DELETE CUE /LOOP POINT

20.- SAMPLE MODE ACTIVATED
21.- CUE LOOP MEMORY (1 TO 4) (NORMAL MODE) / SAMPLES (1 TO 4) (SAMPLE BUTTON ACTIVATED)
22.- BEND (WHEEL)
23.- SCRATCH (WHEEL)
24.- EFFECTS (ECHO, FLANGER, WAH)
25.- DECK SELECTOR (DECK A / DECK B)
26.-
LINK TO PC

info mapping                    info PDF

Audiophony DJazz Pro

HOW TO SET UP?

The system must to recognize your Audiophony DJazz Pro as Audio and MIDI device before configuring in DJ ProMixer.

CONFIGURE YOUR AUDIO AND MIDI SETTINGS

——————————————————————————————————————–
IMPORTANT: Install the drivers provided for the manufacturer and check the configuration of this equivalent controller.
——————————————————————————————————————–

MIDI MAP
(Overview)

Audiophony DJazz Pro MIDI MAP
(Click to enlarge)

Detail

Audiophony DJazz Pro MIDI MAP Detail

  1.- PLAY/ PAUSE
  2.- CUE
  3.- MANUAL LOOP (1.- IN 2.- OUT – EXIT – RELOOP)
  4.- AUTOLOOP FROM ¼ TO 32 BEATS (STARTS
IN 4 BEATS) ”Active” 1/2, “Del” X2
  5.- CUP (Cue and Play)
  6.- KEYLOCK
  7.- EFFECTS DIRECT BUTTONS FX 1, FX2, FX3
  8.- MEMORY CUE / LOOP (1,2,3,4)
  9.- SAMPLES (1,2,3,4)
10.- FX SYNC (FROM 2/1 TO 1/8 BEATS)
11.- FX DRY / WET
12.- FX PARAMETER
13.- ENABLE WHEEL VINYL MODE
14.- TRACKLIST SCROLL
15.- LOAD DECK (A AND B)
16.- BROWSER (PLAYLIST, GROUPS, EXPLORER), OPEN CLOSE FOLDERS
17.- PFL
18.- ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS)
19.- DECK´S VOLUMEN CONTROLS AND CROSSFADER
20.- PITCH
21.- SYNC
22.- BEND (WHEEL)
23.- BEND (BUTTONS)
24.- SCRATCH
25.- BRAKE

info mapping                    info PDF

Numark Mixtrack / Pro

HOW TO SET UP?

The system must recognize your Numark Mixtrack / Pro as Audio Device (only Mixtrack Pro) and MIDI Device (for booth models) before configuring in DJ ProMixer.

CONFIGURATION

Numark Mixtrack has two different set up (for Internal or External Mode):

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Mixtrack Pro as Audio Sound Card.

AUDIO SETTINGS

INTERNAL MODE (Master + Headphones)

For Internal Mode connect your output in (1) RCA  connectors (L+R) for Master Output.

Connect your headphones in front ( ¼ TSR stereo connector).

EXTERNAL MODE (Deck A + Deck B connected to external mixer)

For External Mode connect your outputs 1.- RCA  connectors (L+R) for Deck A, and  2.- RCA connectors (L+R) for Deck B.

Important: Numark Mixtrack Pro is designed to be used as internal mode (with internal Sound Card using master output  & headphones) or external mode (using the internal soundcard for each deck).

Numark Mixtrack have not soundcard, it´s only MIDI Controller.

MIDI SET UP

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (MixTrack Pro) and select on the right side NUMARK MIXTRACK PRO.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

Overview

(Click to enlarge)

Detail

1.-   PLAY / PAUSE
2.-   CUE
3.-   SELECTOR OFF : MANUAL LOOP (1.- IN  2.- OUT
EXIT / RELOOP)
4.-   SELECTOR ON:  AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)(1.-MOVE DOWN    2.- IN  EXIT / RELOOP IN 3.-MOVE UP)
5.-   SELECTOR ON: MEMORY CUE/LOOP  (1,2,3)
6.-   SELECTOR ON: FX 1, FX 2, FX 3
7.-   STUTTER
8.-   KEYLOCK
9.-   ENABLE WHEEL VINYL MODE
10.- FX ECHO BEAT SYNC (FROM 2/1 TO 1/8 BEATS)
11.- FX DRY / WET
12.- FX PARAMETER
13.- FOLDER / FILES SELECTOR
14.- TRACKLIST SCROLL
15.- LOAD DECK
16.- BEND (BUTTONS)
17.- PFL
18.- ROTARY KNOBS OF THE MIXER (HI, MID,BASS)
19.- DECK´S VOLUMEN CONTROLS AND CROSSFADER
20.- PITCH
21.- SYNC
22.- BEND (WHEEL)
23.- SCRATCH

SELECTORS DETAIL

DJ ProMixer Numark Mixtrack Selectors Detail

NEW SELECTOR´S FEATURES:

In this new MIDI Map there are included three buttons as “Selectors”:

1.- “Delete” and “Effects” buttons are connected for enable “Hot Cue” buttons (1,2,3) When “Delete” button is turn on it enables Memory CUE /loop for FX Buttons, when is turn on “Effects” it enables Effects (FX1, FX2, FX3).

2.- “Manual” button when is turn off it enables Manual Loop (In, Out, Exit/Reloop), when is turn on it enables Auto Loop (Move Down,  In / Out /Exit / Reloop, Move Up).

NEW:  FOLDER / FILES SELECTOR

Back Button select Folder / Files into the Browse.

info mapping     info PDF