HOW TO SET UP?
The system must recognize your Hercules DJ Console 4 Mx as Audio and MIDI device before configuring in DJ ProMixer.
Hercules DJ Console 4 Mx only requires download and install Hercules ASIO Driver, once installed you can configure it in DJ ProMixer.
CONFIGURATION
Hercules DJ Console 4 Mx has two different set up (for Internal or External Mode):
Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Hercules DJ Console 4 Mx as Audio Sound Card.
AUDIO SETTINGS
INTERNAL MODE (Master + Headphones)
For Internal Mode choose your output: 1.- ¼ TSR connectors (balanced) or 2.- RCA (unbalanced).
Connect your headphones in front ( ¼ TSR stereo connector).
EXTERNAL MODE (Deck A + Deck B connected to external mixer)
For External Mode choose your outputs: Deck 1.- (1) ¼ TSR connectors (balanced) or (2).- RCA (unbalanced) Deck 2.- (3) ¼ TSR connectors (balanced) or (4).- RCA (unbalanced)
Important: Hercules DJ Console 4 Mx is designed to be used as internal mode (with internal Sound Card using master output & headphones) or external mode (using the internal soundcard for each deck).
MIDI SET UP
In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (HERCULES DJ CONSOLE 4 MX MID0) and select on the right side HERCULES DJ CONSOLE 4 MX.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.
MIDI MAP
Overview
Detail
1.- PLAY / PAUSE
2.- CUE
3.- SYNC
4.- PITCH
5.- BEND (BUTTONS)
6.- SHIFT SELECTOR
7.- 1/2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
7.- (SHIFT ENABLED) MEMORY CUE / LOOP 1
8.- X2 AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
8.- (SHIFT ENABLED) MEMORY CUE / LOOP 2
9.- MANUAL LOOP: IN
9.- (SHIFT ENABLED) MEMORY CUE / LOOP 3
10.- MANUAL LOOP: OUT / EXIT / RELOOP
10.- (SHIFT ENABLED) MEMORY CUE / LOOP 4
11.- FX 1: ECHO
11.- (SHIFT ENABLED) SAMPLE 1
12.- FX 2: FLANGER
12.- (SHIFT ENABLED) SAMPLE 2
13.- MOVE WITH ACTIVE FUNCTION (CUE/LOOP MEMORY OR ACTIVE AUTO LOOP)
14.- FX DRY / WET
15.- KEYLOCK
16.- CHANGE TEMPO RANGE (4%, 8%, 10%, 12%, 16%, 32%)
17.- BEND (WHEEL)
18.- SCRATCH
19.- FOLDER-TREE SELECTOR / OPEN CLOSE
20.- TRACKLIST SELECTOR
21.- TRACKLIST MOVE UP
22.- TRACKLIST MOVE DOWN
23.- LOAD DECK
24.- PFL
25.- KILL (EQ. TREBLE)
26.- KILL (EQ. MID)
27.- KILL (EQ. BASS)
28.- VINYL MODE
29- ROTARY KNOBS OF THE MIXER (EQ HI, MID,BASS), GAIN
30.- DECK´S VOLUMEN CONTROLS AND CROSSFADER