HOW TO SET UP?

The system must recognize your Akiyama Syncron as Audio and MIDI device before configuring in DJ ProMixer.

Akiyama Syncron only requires download and install Akiyama ASIO Driver, once installed you can configure it in DJ ProMixer.

 AUDIO SET UP

Akiyama Syncron has two different configurations (for Internal or External Mode):

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Akiyama Syncron as Audio Sound Card.

AUDIO SETTINGS

INTERNAL MODE (Master + Headphones)

 

 

For Internal Mode choose your output: 1.- for XLR connectors (balanced)  or 2.- for RCA (unbalanced) (1+2).

 

EXTERNAL MODE (Deck A + Deck B connected to external mixer)

For External Mode connect your outputs 1.- RCA  connectors (L+R) for Deck A, and  2.- RCA connectors (L+R) for Deck B.

MIDI SET UP

 

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (SYNCRON0) and select on the right side AKIYAMA SYNCRON.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI  MAP

Overview

 

Detail

 

1.-     PLAY / PAUSE
2.-     CUE
3.-     AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS) IN  EXIT / RELOOP IN
4.-    TRACK SCROLL / PUSH (LOAD)
5.-    FOLDER SCROLL / PUSH (OPEN-CLOSE)
6.-    CUE LOOP MEMORY (1 TO 4) (NORMAL MODE) / SAMPLES (1 TO 4) (SAMPLE BUTTON ACTIVATED)
7.-    MEMORIZE CUE / LOOP POINT
8.-    DELETE CUE /LOOP POINT
9.-    ENABLE SAMPLER (HOLD BUTTON) (SAMPLES 1,2,3,4)
10.-  FX ECHO
11.-  FX FLANGER
12.-  FX WAH
13.-  REVERSE
14.-  BRAKE
15.-  WHEEL MODE: FX PARAMETER
16.-  WHEEL MODE: VINYL
17.-  WHEEL MODE: SEARCH
18.-  PFL
19-  CHANGE TEMPO RANGE (4%, 8%, 10%, 12%, 16%, 32%)
20-  KEYLOCK
21-  MOVE WITH ACTIVE FUNCTION (CUE/LOOP MEMORY  OR ACTIVE AUTO LOOP)
22-  PITCH
23.- BEND (BUTTONS)
24.- BEND (WHEEL)
25.- SCRATCH
26.- SYNC
27.- ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS)
28.- DECK´S VOLUMEN CONTROLS AND CROSSFADER