Numark Mixdeck

HOW TO SET UP?

The system must recognize your Numark Mixdeck as Audio and MIDI Device before configuring in DJ ProMixer.
Numark Mixdeck only requires download and install Numark Asio Driver.

DJ Promixer Driver Audio Numark Mixdeck

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Numark Mixdeck as Audio Sound Card.

AUDIO SETTINGS

DJ ProMixer Numark Mixdeck Audio Set Up

DJ ProMixer Numark Mixdeck front

For Internal Mode choose your output: 1.- for XLR connectors (balanced)  or 2.- for RCA (unbalanced).

Important: Numark Mixdeck is designed to be used as internal mode (with internal Sound Card), but you can use also with DJ ProMixer as external mode (with other/s Sound Card/s and external mixer).

MIDI SET UP

DJ ProMixer Numark Mixdeck MIDI

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (Numark Mixdeck) and select on the right side NUMARK MIXDECK.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI  MAP

Overview

DJ ProMixer Numark Mixdeck map

Detail

DJ ProMixer Numark Mixdeck map detail

1.- PLAY
2.- PAUSE

3.- CUE

4.- CHANGE FOCUS PLAYLIST / GROUPS-SUBGROUPS / EXPLORER
 
5.- SCROLL / LOAD / ENTER

6.- CHANGE FOCUS TREE / TRACKLIST
7.- REVERSE / BRAKE

8.- MANUAL LOOP (IN – OUT – EXIT / RELOOP) DIRECT AUTO LOOP (IN / EXIT) (STARTS IN 4 BEATS)

9.- AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)

10.- SEARCH (WHEEL MODE) 
11.- CUE / LOOP MEMORY (1, 2, 3) (NORMAL MODE) / SAMPLES (1, 2, 3 WITH SAMPLER BUTTON ACTIVATED)
12.- SAMPLER MODE ON / OFF
13.- MEMORIZE CUE / LOOP
14.- KEYLOCK
15.- PITCH

16.- PITCH BEND
17.- SYNC
18.- FX 1 (ECHO) LEFT (ON) CENTER (OFF) – FX 2 (FLANGER) RIGHT (ON) CENTER (OFF)
19.- FX 3 (WAH)

20.- FX DRY / WET
21.- FX PARAMETER
22.- BEND (WHEEL)
23.- SCRATCH (WHEEL)
24.- DECK VOLUMEN
25.- HEADPHONES VOLUMEN
26.- DECK SELECTOR (DECK A / DECK B) (ONLY DUAL MODE)
27.-
LINK TO PC (SOURCE)

info mapping                    info PDF

Advertisements

MIDI CD Controllers (single or dual mode) -no audio sound card-

HOW TO SET UP?
The system must recognize your MIDI CD controller/s before configuring in DJ ProMixer.

IMPORTANT:
– Check and install the drivers of your device from the oficial website.

Plug your MIDI CD Controller and go to “Config” to configurate it.

MIDI CONFIGURATION

Single Mode (2 MIDI CD Controllers connected) DJ ProMixer MIDI NDX 800 Single

Select in MIDI PORT / MIDI MAP 1 on the left side one MIDI CD Controller device and select on the right side the SINGLE A.XML map. Select in MIDI PORT / MIDI MAP 2 on the left side the other MIDI CD Controller device and select on the right side the SINGLE B.XML map

Dual Mode MIDI NDX 800 Dual

Select in MIDI PORT / MIDI MAP 1 on the left side your MIDI CD Controller device, and select on the right side the (A AND B).XML map. Nothing selected in MIDI PORT / MIDI MAP 2

How to change the decks? Two ways: 1.- Hardware: Check the assigned button at MIDI map. 2.- Software: By clicking the headphone button of the deck.

MIDI CD Controllers (single or dual mode) -with audio sound card-

HOW TO SET UP?
The system must recognize your MIDI CD controller/s before configuring in DJ ProMixer.

IMPORTANT:
– Check and install the drivers of your device from the oficial website.

Plug your MIDI CD Controller and go to “Config” to configurate it.

MIDI CONFIGURATION

Single Mode (2 MIDI CD Controllers connected) DJ ProMixer MIDI NDX 800 Single

Select in MIDI PORT / MIDI MAP 1 on the left side one MIDI CD Controller device and select on the right side the SINGLE A.XML map. Select in MIDI PORT / MIDI MAP 2 on the left side the other MIDI CD Controller device and select on the right side the SINGLE B.XML map

Dual Mode MIDI NDX 800 Dual

Select in MIDI PORT / MIDI MAP 1 on the left side your MIDI CD Controller device, and select on the right side the (A AND B).XML map. Nothing selected in MIDI PORT / MIDI MAP 2

How to change the decks? Two ways: 1.- Hardware: Check the assigned button at MIDI map. 2.- Software: By clicking the headphone button of the deck.

AUDIO CONFIGURATION

Open DJ ProMixer and go to “Config” open “Audio Setup”, here you can select your MIDI CD Controller as Audio Sound Card.
There are two ways to connect your device/s as Audio Sound Card (It depends of the drivers of the manufacturer):

1.- ASIO Driver Mode (If it is supported)

DJ ProMixer MIDI CD ASIO

 

2.- Direct sound

DJ ProMixer MIDI CD Audio

Pioneer CDJ – 2000 Nexus

HOW TO SET UP?

– Single or dual mode (two or one CDJ´s)
– Audio configuration

DJ ProMixer CDJ - XDJ Set Up

PIONEER CDJ – 2000 NEXUS MAP

DJ ProMixer CDJ2000Nexus Map

1.-   PLAY / PAUSE
2.-   CUE
3.-   SEARCH CUE / LOOP POINT
4.-   REVERSE
5.-   CUE / SAMPLES / EFFECTS / LOOPS SELECTOR
6.-   DIRECT AUTO LOOP (STARTS IN 4 BEATS)
7.-   CUE / SAMPLES / EFFECTS / LOOPS DIRECT BUTTONS
8.-   MANUAL LOOP (IN – OUT – EXIT / RELOOP)
9.-   AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
10.- DELETE CUE / LOOP POINT
11.- MEMORIZE CUE / LOOP POINT
12.- SCROLL / LOAD / ENTER
13.- CHANGE FOCUS TREE / TRACKLIST
14.- CHANGE FOCUS PLAYLIST / GROUPS-SUBGROUPS / EXPLORER
15.- KEYLOCK
16.- CHANGE TEMPO RANGE (4%, 8%, 10%, 12%, 16%, 32%)
17.- PITCH
18.- BEND
19.- SCRATCH (WHEEL)
20.- SYNC
21.- FX DRY / WET
22.- FX PARAMETER
23.- CHANGE DECK (ONLY IN DUAL MODE)
24.- NEEDLE SEARCH
25.-
LINK TO PC

IMPORTANT: TO CONNECT 2 PIONEER CDJ-2000 NEXUS YOU NEED A HIGH SPEED CPU

info mapping                    info PDF

Pioneer CDJ – 2000

HOW TO SET UP?

– Single or dual mode (two or one CDJ)
– Audio configuration

DJ ProMixer CDJ - XDJ Set Up

PIONEER CDJ – 2000 MAP

DJ ProMixer Pioneer CDJ2000map

1.-   PLAY / PAUSE
2.-   CUE
3.-   SEARCH CUE / LOOP POINT
4.-   REVERSE
5.-   CUE / SAMPLES / EFFECTS / LOOPS SELECTOR
6.-   DIRECT AUTO LOOP (STARTS IN 4 BEATS)
7.-   CUE / SAMPLES / EFFECTS / LOOPS DIRECT BUTTONS
8.-   MANUAL LOOP (IN – OUT – EXIT / RELOOP)
9.-   AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
10.- DELETE CUE / LOOP POINT
11.- MEMORIZE CUE / LOOP POINT
12.- SCROLL / LOAD / ENTER
13.- CHANGE FOCUS TREE / TRACKLIST
14.- CHANGE FOCUS PLAYLIST / GROUPS-SUBGROUPS / EXPLORER
15.- KEYLOCK
16.- CHANGE TEMPO RANGE (4%, 8%, 10%, 12%, 16%, 32%)
17.- PITCH
18.- BEND
19.- SCRATCH (WHEEL)
20.- SYNC
21.- FX DRY / WET
22.- FX PARAMETER
23.- CHANGE DECK (ONLY IN DUAL MODE)
24.- L
INK TO PC

IMPORTANT: TO CONNECT 2 PIONEER CDJ-2000 YOU NEED A HIGH SPEED CPU

info mapping                    info PDF

Pioneer CDJ / XDJ (Audio and HID Advanced Configuration)

HOW TO SET UP CDJ / XDJ?

Your System must recognize your Pioneer CDJ / XDJ as Audio and HID device before configuring in DJ ProMixer.
Download and install Pioneer CDJ ASIO Driver from the oficial website: http://pioneerdj.com/support/

1.- CONNECT YOUR CDJ / XDJ

1. Plug your CDJ / XDJ to your PC (USB) to recognize your device/s as Audio Sound Card and HID Device. Turn on your CDJ / XDJ and press “Link” button, select “Control Mode” and push the rotary button to connect.                                   (Display detail after connect your CDJ )

2. AUDIO SET UP

2. Open DJ ProMixer and go to “Config” open “Audio Setup”, here you can select your CDJ / XDJ as Audio Sound Card. There are two ways to connect your CDJ / XDJ as Audio Sound Card:
2.1 ASIO Driver Mode (recommended):
(Pioneer ASIO Driver required)

DJ ProMixer CDJ ASIO

2.2 Direct Sound:

DJ ProMixer CDJ Direct Sound

(For other configuration choose your Work Mode and Audio Sound Card).

3. HID CONTROL SET UP:

3.1. Single Mode (2 CDJ / XDJ Connected)

DJ ProMixer CDJ Single

Select in HID PORT / MIDI MAP 1 on the left side one device (PIONEER CDJ / XDJ (your model) HID0 and select on the right side PIONEER CDJ / XDJ-(your model)SINGLEA.XML. Select in HID PORT / MIDI MAP 2 on the left side the other device (PIONEER CDJ / XDJ- (your model) HID 1 and select on the right side PIONEER CDJ / XDJ-(your model)SINGLEB.XML

IMPORTANT: Normally you don´t know what´s the first device recognized, it depends of the system, then if your devices are inverted, you must to swap it on the left side of the HID PORT.

3.2. Dual Mode:

DJ ProMixer CDJ Dual

Select in HID PORT / MIDI MAP 1 on the left side your PIONEER CDJ / XDJ-(your model) HID and select on the right side PIONEER CDJ / XDJ-(your model).XML. Nothing selected in HID PORT / HID MAP 2 How to change the decks? By default your CDJ / XDJ start in “A” Deck to change to “B” in Dual mode you have two ways: 1- Hardware: By pressing “Back” button. 2. Software: By clicking the headphone button of the selected deck.