Numark NDX 500

HOW TO SET UP?

The system must recognize your Numark NDX-500 device/s before configuring in DJ ProMixer.
IMPORTANT: Numark NDX-500 is a MIDI and audio sound card device

MIDI CONFIGURATION

Single Mode (2 Numark NDX-500 Connected)

DJ ProMixer Single Numark NDX 500

Select in MIDI PORT / MIDI MAP 1 on the left side one device (Numark NDX500 0) and select on the right side NUMARK NDX-500(SINGLE A).XML. Select in MIDI PORT / MIDI MAP 2 on the left side the other device (Numark NDX500 I) and select on the right side NUMARK NDX-500(SINGLE B).XML

Dual Mode

DJ ProMixer Dual Numark NDX 500

Select in MIDI PORT / MIDI MAP 1 on the left side Numark NDX500 0, and select on the right side NUMARK NDX-500 (A AND B).XML. Nothing selected in MIDI PORT / MIDI MAP 2 How to change the decks? Two ways: 1.- Hardware: Use the “Single Button”. 2.- Software: By clicking the headphone button of the deck.

AUDIO CONFIGURATION

Open DJ ProMixer and go to “Config”, open “Audio Setup”, here you can select your Numark NDX-500 as Audio Sound Card.

DJ ProMixer Audio Numark NDX 500

MIDI MAP

DJ ProMixer Numark NDX 500 Map

1.-   PLAY / PAUSE
2.-   CUE
 
3.-   SYNC
 
4.-   SCROLL / LOAD / ENTER
5.-   CHANGE FOCUS TREE / TRACKLIST
6.-   MANUAL LOOP (IN – OUT – EXIT / RELOOP)
7.-   CUE / LOOP MEMORY (1, 2, 3) 

8.-   MEMORIZE CUE / LOOP
9.-   BRAKE
10.- REVERSE
11.- SCRATCH MODE (WHEEL)
12.- SEARCH MODE (WHEEL)
13.- DECK SELECTOR (DECK A / DECK B) (ONLY DUAL MODE)
14.- CHANGE FOCUS PLAYLIST / GROUPS-SUBGROUPS / EXPLORER 
15.- PITCH

16.- PITCH BEND
17.- PITCH
18.- BEND (BUTTONS)
19.- BEND (WHEEL)
20.- WHEEL
21.- LINK TO PC (SOURCE)

info mapping                    info PDF

Advertisements

Pioneer DDJ – SB

HOW TO SET UP?

The system must recognize your Pioneer DDJ-SB as Audio and MIDI Device before configuring in DJ ProMixer.
Pioneer DDJ-SB only requires download and install Pioneer DDJ SB ASIO Driver.

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Pioneer DDJ-SB as Audio Sound Card.

AUDIO SETTINGS

DJ ProMixer Pioneer DDJ-SB ASIO

Important: Pioneer DDJ –SB is designed to be used as internal mode (with internal Sound Card), but you can use also with DJ ProMixer as external mode (with other/s Sound Card/s and external mixer).

MIDI CONFIGURATION

 DJ ProMixer Pioneer DDJ-SB MIDI

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (DDJ-SB MID) and select on the right side PIONEER DDJ-SB.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

DJ ProMixer Pioneer DDJ-SB_Map

 DETAIL

 DJ ProMixer Pioneer DDJ-SB_Map_Detail

1.-   PLAY / PAUSE
2.-   CUE
3.-   SYNC
4.-   SHIFT
5.-   VINYL MODE
6.-   (SHIFT +) BRAKE
7.-   FX 1 (ECHO)
8.-   FX 2 (FLANGER)
9.-   FX 3 (WAH)
10.- FX DRY WET
11.- (SHIFT +) FX PARAMETER
12.- PITCH
13.- KEYLOCK
14.- (SHIFT +) TEMPO RANGE (4%, 8%, 10%, 12%, 16%, 32%)
15.- TRACKLIST SCROLL
16.- CHANGE FOCUS TREE / TRACKLIST
17.- (SHIFT +) CHANGE FOCUS PLAYLIST / GROUPS-SUBGROUPS / EXPLORER
18.- LOAD DECK
19.- HEADPHONES VOLUMEN
20.- PFL
21.- EQ. ROTARY KNOBS (HI, MID,BASS)

22.- DECK´S VOLUMEN CONTROLS AND CROSSFADER
 

PAD MODE DETAIL

DJ ProMixer Pioneer DDJ-SB_PAD_Mode_Detail

23.- MEMORY CUE / LOOP SELECTOR (HOT CUE SELECTOR)
NOTHING SELECTED: CUE/LOOP 1, CUE/LOOP 2, CUE/LOOP 3, CUE/LOOP 4.
SHIFT +: CUE/LOOP 5, CUE/LOOP 6, MEMO, DEL
24.- AUTOLOOP (FROM 1/4 TO 32 BEATS) (ROLL SELECTOR)
AUTOLOOP 1/2, AUTOLOOP (IN 4 BEATS) EXIT/RELOOP, AUTOLOOP X 2
25.- MANUAL LOOP (MANUAL LOOP SELECTOR)
LOOP IN, LOOP OUT, LOOP EXIT/RELOOP
26.- SAMPLER (SAMPLER SELECTOR)
NOTHING SELECTED: SAMPLE 1, SAMPLE 2, SAMPLE 3, SAMPLE 4
SHIFT + : SAMPLE 5, SAMPLE 6

info mapping                    info PDF

Pioneer DDJ – SR

HOW TO SET UP?

The system must recognize your Pioneer DDJ-SR as Audio and MIDI Device before configuring in DJ ProMixer.
Pioneer DDJ-SR only requires download and install Pioneer DDJ SR ASIO Driver.

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Pioneer DDJ-SR as Audio Sound Card.

AUDIO SETTINGS

DJ ProMixer Pioneer DDJ-SR ASIO

DJ ProMixer Pioneer DDJ-SR Audio Connection For Internal Mode choose your output (1.- for TRS connectors or 2.- for RCA)

Important: Pioneer DDJ –SR is designed to be used as internal mode (with internal Sound Card), but you can use also with DJ ProMixer as external mode (with other/s Sound Card/s and external mixer).

MIDI CONFIGURATION

 DJ ProMixer Pioneer DDJ-SR MIDI

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (DDJ-SR MID) and select on the right side PIONEER DDJ-SR.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

DJ ProMixer Pioneer DDJ-SR_map

 DETAIL

 DJ Promixer Pioneer DDJ-SR_map_detail

1.-   PLAY / PAUSE
2.-   CUE
3.-   SYNC
4.-   SHIFT
5.-   VINYL MODE
6.-   BRAKE
7.-   FX 1 (ECHO)
8.-   FX 2 (FLANGER)
9.-   FX 3 (WAH)
10.- FX DRY / WET
11.- FX PARAMETER
12.- FX ECHO SYNC (FROM 2/1 TO 1/8 BEATS)
13.- TRACKLIST SCROLL
14.- CHANGE FOCUS TREE / TRACKLIST
15.- CHANGE FOCUS PLAYLIST / GROUPS-SUBGROUPS / EXPLORER
16.- KEYLOCK
17.- TEMPO RANGE (4%, 8%, 10%, 12%, 16%, 32%)
18.- PITCH
19.- AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS) PUSH: AUTO IN  EXIT / RELOOP IN
20.- AUTOLOOP X 1/2
21.- AUTOLOOP X 2
22.- MEMORY CUE / LOOP
23.- DEL CUE / LOOP
24.- BEND (WHEEL)
25.- SCRATCH  (WHEEL)
26.- LOAD DECK
27.- HEADPHONES VOLUMEN
28.- SAMPLER VOLUMEN
29.- ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS)
30.- PFL
30.- DECK´S VOLUMEN CONTROLS AND CROSSFADER
31.- PFL 

PAD MODE DETAIL

DJ Promixer Pioneer DDJ-SR_PAD Mode Detail

32.- MEMORY CUE / LOOP SELECTOR (HOT CUE SELECTOR)
33.- AUTOLOOP (FROM 1/4 TO 32 BEATS) (ROLL SELECTOR)
34.- SAMPLER (SAMPLER SELECTOR)

info mapping                    info PDF

Pioneer DDJ – SX

HOW TO SET UP?

The system must recognize your Pioneer DDJ-SX as Audio and MIDI Device before configuring in DJ ProMixer.
Pioneer DDJ-SX only requires download and install Pioneer DDJ SX ASIO Driver.

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Pioneer DDJ-SX as Audio Sound Card.

AUDIO SETTINGS

DJ ProMixer Pioneer DDJ-SX Audio_ASIO

DJ ProMixer Pioneer DDJ-SX2_audio connection

For Internal Mode choose your output (1.- for XLR connectors or 2.- for RCA)

Important: Pioneer DDJ –SX is designed to be used as internal mode (with internal Sound Card), but you can use also with DJ ProMixer as external mode (with other/s Sound Card/s and external mixer).

MIDI CONFIGURATION

 DJ ProMixer Pioneer DDJ-SX _MIDI

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (DDJ-SX MID) and select on the right side PIONEER DDJ-SX.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

DJ ProMixer Pioneer DDJ-SX_map

 DETAIL

 DJ Promixer Pioneer DDJ-SX_map_detail

1.-   PLAY / PAUSE
2.-   CUE
3.-   SYNC
4.-   SHIFT
5.-   REVERSE
6.-   BRAKE
7.-   FX 1 (ECHO)
8.-   FX 2 (FLANGER)
9.-   FX 3 (WAH)
10.- FX DRY / WET
11.- FX PARAMETER
12.- FX ECHO SYNC (FROM 2/1 TO 1/8 BEATS)
13.- TRACKLIST SCROLL
14.- CHANGE FOCUS TREE / TRACKLIST
15.- CHANGE FOCUS PLAYLIST / GROUPS-SUBGROUPS / EXPLORER
16.- KEYLOCK
17.- (SHIFT +) TEMPO RANGE (4%, 8%, 10%, 12%, 16%, 32%)
18.- PITCH
19.- AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS) PUSH: AUTO IN  EXIT / RELOOP IN
20.- AUTOLOOP X 1/2
21.- AUTOLOOP X 2
22.- MANUAL LOOP IN
23.- MANUAL LOOP  OUT / EXIT / RELOOP
24.- MEMORY CUE / LOOP
25.- DEL CUE / LOOP
26.- BEND (WHEEL)
27.- SCRATCH  (WHEEL)
28.- NEEDLE SEARCH
29.- ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS)
30.- DECK´S VOLUMEN CONTROLS AND CROSSFADER
31.- PFL
32.- HEADPHONES VOLUMEN
33.- LOAD DECK
34.- SAMPLER VOLUMEN
35.- VINYL MODE 

PAD MODE DETAIL

DJ ProMixer Pioneer DDJ-SX PAD Mode Detail

36.- MEMORY CUE / LOOP SELECTOR (HOT CUE SELECTOR)
37.- AUTOLOOP (FROM 1/4 TO 32 BEATS) (ROLL SELECTOR)
38.- SAMPLER (SAMPLER SELECTOR)

info mapping                    info PDF

Pioneer DDJ – SX2

HOW TO SET UP?

The system must recognize your Pioneer DDJ-SX2 as Audio and MIDI Device before configuring in DJ ProMixer.
Pioneer DDJ-SX2 only requires download and install Pioneer DDJ SX2 ASIO Driver.

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Pioneer DDJ-SX2 as Audio Sound Card.

AUDIO SETTINGS

DJ ProMixer Pioneer DDJ-SX2_ASIO

DJ ProMixer Pioneer DDJ-SX2_audio connection

For Internal Mode choose your output (1.- for XLR connectors or 2.- for RCA)

Important: Pioneer DDJ –SX2 is designed to be used as internal mode (with internal Sound Card), but you can use also with DJ ProMixer as external mode (with other/s Sound Card/s and external mixer).

MIDI CONFIGURATION

 DJ ProMixer Pioneer DDJ-SX2_MIDI

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (DDJ-SX2 MID) and select on the right side PIONEER DDJ-SX2.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

DJ ProMixer Pioneer DDJ-SX2_map

 DETAIL

 DJ ProMixer Pioneer DDJ-SX2_map_detail

1.-   PLAY / PAUSE
2.-   CUE
3.-   SYNC
4.-   SHIFT
5.-   REVERSE
6.-   BRAKE
6.-   (SHIFT +) ENABLE / DISABLE VINYL MODE (BY HARDWARE)
7.-   FX 1 (ECHO)
8.-   FX 2 (FLANGER)
9.-   FX 3 (WAH)
10.- FX DRY / WET
11.- FX PARAMETER
12.- FX ECHO SYNC (FROM 2/1 TO 1/8 BEATS)
13.- TRACKLIST SCROLL
14.- CHANGE FOCUS TREE / TRACKLIST
15.- CHANGE FOCUS PLAYLIST / GROUPS-SUBGROUPS / EXPLORER
16.- KEYLOCK
17.- (SHIFT +) TEMPO RANGE (4%, 8%, 10%, 12%, 16%, 32%)
18.- PITCH
19.- AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS) PUSH: AUTO IN  EXIT / RELOOP IN
20.- AUTOLOOP X 1/2
21.- AUTOLOOP X 2
22.- MANUAL LOOP IN
23.- MANUAL LOOP  OUT / EXIT / RELOOP
24.- MEMORY CUE / LOOP
25.- DEL CUE / LOOP
26.- BEND (WHEEL)
27.- SCRATCH  (WHEEL)
28.- NEEDLE SEARCH
29.- ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS)
30.- DECK´S VOLUMEN CONTROLS AND CROSSFADER
31.- PFL
32.- HEADPHONES VOLUMEN
33.- LOAD DECK
34.- SAMPLER VOLUMEN 

PAD MODE DETAIL

DJ ProMixer Pioneer DDJ-SX2_PAD_mode_detail

35.- MEMORY CUE / LOOP SELECTOR (HOT CUE SELECTOR)
36.- AUTOLOOP (FROM 1/4 TO 32 BEATS) (ROLL SELECTOR)
37.- SAMPLER (SAMPLER SELECTOR)

info mapping                    info PDF

Pioneer DDJ – SZ

HOW TO SET UP?

The system must recognize your Pioneer DDJ-SZ as Audio and MIDI Device before configuring in DJ ProMixer.
Pioneer DDJ-SZ only requires download and install Pioneer DDJ SZ ASIO Driver.

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Pioneer DDJ-SZ as Audio Sound Card.

AUDIO SETTINGS

DJ ProMixer Pioneer DDJ-SZ ASIO

DJ ProMixer Pioneer DDJ-SZ_audio_connections

For Internal Mode choose your output (1.- for XLR connectors or 2.- for RCA)

Important: Pioneer DDJ –SZ is designed to be used as internal mode (with internal Sound Card), but you can use also with DJ ProMixer as external mode (with other/s Sound Card/s and external mixer).

MIDI CONFIGURATION

 DJ ProMixer Pioneer DDJ-SZ MIDI

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (DDJ-SZ MID) and select on the right side PIONEER DDJ-SZ.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

DJ ProMixer Pioneer DDJ-SZ_map

 DETAIL

 DJ ProMixer Pioneer DDJ-SZ_map_detail

1.-   PLAY / PAUSE
2.-   CUE
3.-   SYNC
4.-   SHIFT
5.-   REVERSE
6.-   BRAKE
6.-   (SHIFT +) ENABLE / DISABLE VINYL MODE (BY HARDWARE)
7.-   FX 1 (ECHO)
8.-   FX 2 (FLANGER)
9.-   FX 3 (WAH)
10.- FX DRY / WET
11.- FX PARAMETER
12.- FX ECHO SYNC (FROM 2/1 TO 1/8 BEATS)
13.- TRACKLIST SCROLL / LOAD DECK
14.- CHANGE FOCUS TREE / TRACKLIST
15.- CHANGE FOCUS PLAYLIST / GROUPS-SUBGROUPS / EXPLORER
16.- KEYLOCK
17.- (SHIFT +) TEMPO RANGE (4%, 8%, 10%, 12%, 16%, 32%)
18.- PITCH
19.- AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS) PUSH: AUTO IN  EXIT / RELOOP IN
20.- AUTOLOOP X 1/2
21.- AUTOLOOP X 2
22.- MANUAL LOOP IN
23.- MANUAL LOOP  OUT / EXIT / RELOOP
24.- MEMORY CUE / LOOP
25.- DEL CUE / LOOP
26.- BEND (WHEEL)
27.- SCRATCH  (WHEEL)
28.- NEEDLE SEARCH
29.- ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS)
30.- DECK´S VOLUMEN CONTROLS AND CROSSFADER
31.- PFL
32.- HEADPHONES VOLUMEN

PAD MODE DETAIL

DJ ProMixer Pioneer DDJ-SZ_map_PAD_Mode

33.- MEMORY CUE / LOOP SELECTOR (HOT CUE SELECTOR)
34.- AUTOLOOP (FROM 1/4 TO 32 BEATS) (ROLL SELECTOR)
35.- SAMPLER (SAMPLER SELECTOR)

info mapping                    info PDF

Synq DMC-2000

HOW TO SET UP?

The system must recognize your Synq DMC-2000 as Audio and MIDI device before configuring in DJ ProMixer.

AUDIO AND MIDI SETTINGS

——————————————————————————————————————– IMPORTANT: Install the drivers provided for the manufacturer and check this configuration to install your device
——————————————————————————————————————–

MIDI MAP
Overview

DJ ProMixer Synq DMC-2000_map

Detail

DJ ProMixer Synq DMC-2000_map_detail_1

1.-     PLAY / PAUSE
2.-     CUE
3.-     AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS) IN  EXIT / RELOOP IN
4.-    TRACK SCROLL / PUSH (LOAD)
5.-    FOLDER SCROLL / PUSH (OPEN-CLOSE)
6.-    CUE LOOP MEMORY (1 TO 4) (NORMAL MODE) / SAMPLES (1 TO 4) (SAMPLE BUTTON ACTIVATED)
7.-    MEMORIZE CUE / LOOP POINT
8.-    DELETE CUE /LOOP POINT
9.-    ENABLE SAMPLER (HOLD BUTTON) (SAMPLES 1,2,3,4)
10.-  FX ECHO
11.-  FX FLANGER
12.-  FX WAH
13.-  REVERSE
14.-  BRAKE
15.-  WHEEL MODE: FX PARAMETER
16.-  WHEEL MODE: VINYL
17.-  WHEEL MODE: SEARCH
18.-  PFL
19-  CHANGE TEMPO RANGE (4%, 8%, 10%, 12%, 16%, 32%)
20-  KEYLOCK
21-  MOVE WITH ACTIVE FUNCTION (CUE/LOOP MEMORY  OR ACTIVE AUTO LOOP)
22-  PITCH
23.- BEND (BUTTONS)
24.- BEND (WHEEL)
25.- SCRATCH
26.- SYNC
27.- ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS)
28.- DECK´S VOLUMEN CONTROLS AND CROSSFADER

info mapping                    info PDF

Synq DMC-1000

HOW TO SET UP?

The system must recognize your Synq DMC-1000 as MIDI Device before configuring in DJ ProMixer.

MIDI SETTINGS

——————————————————————————————————————-
IMPORTANT: Install the drivers provided for the manufacturer and check this configuration to install your device
——————————————————————————————————————–

MIDI MAP

 DJ ProMixer Synq dmc-1000_map

1.- PLAY / PAUSE
  2.- CUE
  3.- CUP (CUE & PLAY)
  4.- CHANGE FOCUS PLAYLIST / GROUPS-SUBGROUPS / EXPLORER
  5.- TRACK SCROLL / PUSH (LOAD)
  6.- FOLDER SCROLL / PUSH (OPEN-CLOSE)
  7.- REVERSE
  8.- MANUAL LOOP (IN – OUT – EXIT / RELOOP)
DIRECT AUTO LOOP (IN / EXIT) (STARTS IN 4 BEATS)

  9.- AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)
10.- SELECTOR AUTOLOOP (FROM ¼ TO 32 BEATS) / FX ECHO BEAT SYNC (FROM 1/8 TO 2/1) 
11.- SELECTOR AUTOLOOP / FX BEAT << MOVE DOWN / MOVE UP>>
12.- WHEEL MODE (SCRATCH, SEARCH, FX)
13.- CHANGE TEMPO RANGE (4%, 8%, 10%, 12%, 16%, 32%)
14.- KEYLOCK (BY DEFAULT DISABLED)
15.- PITCH

16.- PITCH BEND
17.- SYNC
18.- MEMORIZE CUE / LOOP POINT
19.- DELETE CUE /LOOP POINT

20.- SAMPLE MODE ACTIVATED
21.- CUE LOOP MEMORY (1 TO 4) (NORMAL MODE) / SAMPLES (1 TO 4) (SAMPLE BUTTON ACTIVATED)
22.- BEND (WHEEL)
23.- SCRATCH (WHEEL)
24.- EFFECTS (ECHO, FLANGER, WAH)
25.- DECK SELECTOR (DECK A / DECK B)
26.-
LINK TO PC

info mapping                    info PDF

Zomo MC-1000

HOW TO SET UP?

The system must recognize your Zomo MC-1000 as Audio Device and MIDI Device  before configuring in DJ ProMixer.

AUDIO SETTINGS

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Zomo MC-1000 as Audio Sound Card.
Note: You do not need install additionals audio drivers, once connected is just plug and play.

DJ ProMixer Audio Zomo MC - 1000

Connect your output in RCA  connectors for Channels 1+2 (Deck A) and 3+4 (Deck B).

DJ ProMixer Zomo Audio Output

MIDI SET UP

Important: Select “C1” in MIDI Selector

Zomo C1 MIDI Selector

DJ ProMixer MIDI Zomo MC - 1000

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (MC-1000) and select on the right side ZOMO MC-1000.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

Overview
DJ ProMixer Zomo MC-1000_map
(Click to enlarge)

Detail

DJ ProMixer Zomo MC-1000_map_detail

1.-   PLAY / PAUSE
2.-   CUE 1, CUE 2, CUE 3
2.-   (SHIFT) CUE 4, MEMO, DEL
3.-   SYNC
4.-   SHIFT SELECTOR
5.-   AUTO LOOP (IN 4 BEAT) IN / OUT / EXIT / RELOOP
6.-   PITCH
7.-   DECK VOLUMEN
8.-   BEND
9.-   FX DRY / WET
9.-   (SHIFT) EQ BASS
10.- FX PARAMETER
10.- (SHIFT) EQ MID
11.- FX ECHO BEAT SYNC (FROM 2/1 TO 1/8 BEATS)
11.- (SHIFT) EQ HI
12.- (SHIFT) GAIN
13.- FX 1 (ECHO)
13.- (SHIFT) SAMPLE 1
14.- FX 2 (FLANGER)
14.- (SHIFT) SAMPLE 2
15.- FX 3 (WAH)
15.- (SHIFT) SAMPLE 3
16.- PFL
16.- (SHIFT) SAMPLE 4
17.- SCROLL
18.- CHANGE FOCUS TREE / TRACKLIST
19.- CHANGE FOCUS PLAYLIST / GROUPS-SUBGROUPS / EXPLORER
20.- LOAD 

info mapping                    info PDF

Pioneer DDJ – S1

HOW TO SET UP?

The system must recognize your Pioneer DDJ-S1 as Audio and MIDI Device before configuring in DJ ProMixer.
Pioneer DDJ-S1 only requires download and install Pioneer DDJ ASIO Driver.

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Pioneer DDJ-S1 as Audio Sound Card.

AUDIO SETTINGS

DJ ProMixer ASIO Pioneer DDJ S1

For Internal Mode choose your output (1.- for XLR connectors or 2.- for RCA)

Important: Pioneer DDJ –S1 is designed to be used as internal mode (with internal Sound Card), but you can use also with DJ ProMixer as external mode (with other/s Sound Card/s and external mixer).

MIDI CONFIGURATION

DJ ProMixer MIDI Pioneer DDJ-S1

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (DDJ-S1 MID) and select on the right side PIONEER DDJ-S1.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

DJ ProMixer Pioneer_DDJ_S1 Map

DETAIL

DJ ProMixer Pioneer_DDJ_S1 Detail

1.-   PLAY / PAUSE
2.-   CUE
3.-   MANUAL LOOP (IN – OUT , EXIT-RELOOP)
4.-   AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS) PUSH: AUTO IN  EXIT / RELOOP IN
5.-   TEMPO RANGE (4%, 8%, 10%, 12%, 16%, 32%)
6.-   KEYLOCK
7.-   EFFECTS DIRECT BUTTONS : (CREATES / BROWSER = FX1, FILES / PREPARE = FX2, ON /     OFF = FX3)
8.-   CUE / LOOP MEMORY (5 DIRECT BUTTONS) 8.- (+ SHIFT) SAMPLER DIRECT BUTTONS (1, 2, 3, 4, 5)
9.-   MEMORY
10.- FX SYNC (FROM 2/1 TO 1/8 BEATS)
11.- FX DRY / WET
12.- FX PARAMETER
13.- REVERSE
14.- TRACKLIST SCROLL
15.- LOAD DECK
16.- REC
17.- PFL
18.- ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS)
19.- DECK´S VOLUMEN CONTROLS AND CROSSFADER
20.- PITCH
21.- SYNC
22.- BEND
23.- SCRATCH
24.- SHIFT
25.- BRAKE
26.- CHANGE FOCUS PLAYLIST / GROUPS-SUBGROUPS / EXPLORER
27.- CHANGE FOCUS TREE / TRACKLIST
28.- NEEDLE SEARCH

info mapping                    info PDF

Behringer BCD-2000

HOW TO SET UP?

The system must recognize your Behringer BCD-2000 as Audio and MIDI device before configuring in DJ ProMixer.

Behringer BCD-2000  only requires download and install Behringer ASIO Driver, once installed you can configure it in DJ ProMixer.

 AUDIO SET UP

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Behringer BCD-2000 as Audio Sound Card.

AUDIO SETTINGS

INTERNAL MODE (Master + Headphones)

 

DJ ProMixer ASIO Behringer BCD-2000

MIDI SET UP

 DJ ProMixer MIDI Behringer BCD-2000

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (BCD30000) and select on the right side BEHRINGER BCD-2000.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI  MAP

Overview

 DJ ProMixer Behringer BCD-2000 Map

Detail

DJ ProMixer Behringer BCD-2000 Map Detail

1.-   PLAY / PAUSE
2.-   CUE
3.-   AUTOLOOP (4 BEATS) IN / EXIT
4.-   RELOOP
5.-   SYNC
6.-   SRATCH (WHEEL)
7.-   LOAD TRACK
8.-   BEND (DECK PLAYING) / TRACK SELECTOR (DECK STOPPED)
9.-   PITCH
10.- SELECTOR MEMORY CUE / LOOP
11.- DECK VOLUMEN
12.- EQUALIZER ROTARY KNOBS (GAIN, HI, MID,BASS)
13.- KILL
14.- PFL SELECTOR
15.- FX ECHO
16.- FX FLANGER
17.- FX DRY / WET
18.- FX PARAMETER
19-  WHEEL
20-  CROSSFADER

info mapping                    info PDF

Behringer BCD-3000

HOW TO SET UP?

The system must recognize your Behringer BCD-3000 as Audio and MIDI device before configuring in DJ ProMixer.

Behringer BCD-3000  only requires download and install Behringer ASIO Driver, once installed you can configure it in DJ ProMixer.

 AUDIO SET UP

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Behringer BCD-3000 as Audio Sound Card.

AUDIO SETTINGS

INTERNAL MODE (Master + Headphones)

DJ ProMixer ASIO Behringer BCD-3000_

 

MIDI SET UP

 DJ ProMixer MIDI Behringer BCD-3000

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (BCD30000) and select on the right side BEHRINGER BCD-3000.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI  MAP

Overview

 DJ ProMixer BehringerBCD3000 Map

Detail

DJ ProMixer BehringerBCD3000_Map Detail


1.-   PLAY / PAUSE
2.-   CUE
3.-   AUTOLOOP (4 BEATS) IN / EXIT
4.-   RELOOP
5.-   SYNC
6.-   SRATCH (WHEEL)
7.-   LOAD TRACK
8.-   BEND (DECK PLAYING) / TRACK SELECTOR (DECK STOPPED)
9.-   PITCH
10.- SELECTOR MEMORY CUE / LOOP
11.- DECK VOLUMEN
12.- EQUALIZER ROTARY KNOBS (GAIN, HI, MID,BASS)
13.- KILL
14.- PFL SELECTOR
15.- FX ECHO
16.- FX FLANGER
17.- FX DRY / WET
18.- FX PARAMETER
19-  WHEEL
20-  CROSSFADER

info mapping                    info PDF

ION Discover DJ

HOW TO SET UP?

The system must recognize your ION Discover DJ before configuring in DJ ProMixer.

IMPORTANT: ION Discover DJ is a MIDI Device (It has not integrated audio device/s) For audio configuration choose your work mode and audio sound card/s).

 MIDI SET UP

DJ ProMixer Ion Discover DJ MIDI

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (Ion Discover DJ Mid0) and select on the right side ION DISCOVER DJ.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP
Overview

 DJ ProMixer Ion Discover DJ map

Detail

DJ ProMixer Ion Discover DJ map detail

1.-   PLAY / PAUSE
2.-   CUE
3.-   REVERSE
4.-   SYNC
5.-   DECK VOLUMEN
6.-   BASS / TREBLE
7.-   PITCH BEND
8.-   SCROLL
9.-   LOAD
10.- CROSSFADER
11.-  BEND (WHEEL)

info mapping                    info PDF

ION iCUE

HOW TO SET UP?

The system must recognize your ION ICUE before configuring in DJ ProMixer.

IMPORTANT: ION ICUE is a MIDI Device (It has not integrated audio device/s) For audio configuration choose your work mode and audio sound card/s).

 MIDI SET UP

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (Ion ICUE Mid0) and select on the right side ION ICUE.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI Ion ICUE

MIDI MAP
Overview

DJ ProMixer ION ICUEl MIDI map

Detail

DJ ProMixer ION ICUEl MIDI map detail

1.-   PLAY
2.-   PAUSE
3.-   CUE
4.-   PITCH
5.-   SYNC
6.-   KEYLOCK
7.-   SCRATCH
8.-   PFL VOLUMEN (A AND B)
9.-   ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS)
10.- VOLUMEN CONTROLS AND CROSSFADER
11.- VOLUMEN CONTROLS AND CROSSFADER
12.- WHEELS

info mapping                    info PDF

Numark Total Control

HOW TO SET UP?

The system must recognize your Numark Total Control before configuring in DJ ProMixer.
IMPORTANT: Numark Total Control is a MIDI Device (have not integrated audio device/s) For audio configuration choose your work mode and audio sound card/s).

MIDI CONFIGURATION

DJ ProMixer Numark Total Control MIDI

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (Numark TOTAL CONTROL MIDI0) and select on the right side NUMARK TOTAL CONTROL.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

TWO MIDI MAPS

Overview

Numark Total Control MIDI map

Detail

DJ ProMixer Numark Total Control MIDI map detail

1.-   PLAY
2.-   PAUSE
3.-   CUE
4.-   PITCH
5.-   SYNC
6.-   KEYLOCK
7.-   PFL
8.-   MANUAL LOOP (1.- IN  2.- OUT / EXIT / RELOOP)
9.-   PITCH BEND
10.- CHANGE FOCUS TREE / TRACKLIST
11.- SCROLL / LOAD / ENTER
12.- LOAD TRACK
13.- FX DRY / WET
14.- FX PARAMETER
15.- MID MAP 1 AND MIDI MAP 2 – FX – ECHO
16.- MIDI MAP 1 – SCRATCH / MIDI MAP 2 – FX – FLANGER
17.- MIDI MAP 1  FX FLANGER / MIDI MAP 2 – SAMPLER 1
18.- MIDI MAP 1 FX WAH / MIDI MAP 2 – SAMPLER 2
19.- FX ECHO BEAT SYNC
20.- SAMPLER VOLUMEN
21.- PFL VOLUMEN (A AND B)
22.- ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS) / KILL = PUSH (HI, MID, BASS)
23.- VOLUMEN CONTROLS AND CROSSFADER
24.- WHEELS

info mapping                    info PDF

Numark Stealth Control

HOW TO SET UP?

The system must recognize your Numark Stealth Control before configuring in DJ ProMixer.
IMPORTANT: Numark Stealth Control is a MIDI Device (It has not integrated audio device/s) For audio configuration choose your work mode and audio sound card/s).

MIDI CONFIGURATION

DJ ProMixer Numark Stealth Control MIDI

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (Numark OMNI CONTROL MIDI0) and select on the right side NUMARK OMNI CONTROL.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

TWO MIDI MAPS

Overview

DJ ProMixer Numark Stealth Control MIDI map

Detail

Numark Stealth Control MIDI map detail

1.-   PLAY
2.-   PAUSE
3.-   CUE
4.-   PITCH
5.-   SYNC
6.-   KEYLOCK
7.-   PFL
8.-   MANUAL LOOP (1.- IN  2.- OUT / EXIT / RELOOP)
9.-   PITCH BEND
10.- CHANGE FOCUS TREE / TRACKLIST
11.- SCROLL / LOAD / ENTER
12.- LOAD TRACK
13.- FX DRY / WET
14.- FX PARAMETER
15.- MID MAP 1 AND MIDI MAP 2 – FX – ECHO
16.- MIDI MAP 1 – SCRATCH / MIDI MAP 2 – FX – FLANGER
17.- MIDI MAP 1  FX FLANGER / MIDI MAP 2 – SAMPLER 1
18.- MIDI MAP 1 FX WAH / MIDI MAP 2 – SAMPLER 2
19.- FX ECHO BEAT SYNC
20.- SAMPLER VOLUMEN
21.- PFL VOLUMEN (A AND B)
22.- ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS) / KILL = PUSH (HI, MID, BASS)
23.- VOLUMEN CONTROLS AND CROSSFADER
24.- WHEELS

info mapping                    info PDF

Numark Omni Control

HOW TO SET UP?

The system must recognize your Numark Omni Control as Audio and MIDI device before configuring in DJ ProMixer.

CONFIGURATION

Numark Omni control requires download and install Numark Asio Driver.

DJ ProMixer ASIO Numark Omni Control

This controller has two different configurations (for Internal or External Mode):

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Mixtrack Pro as Audio Sound Card.

AUDIO SETTINGS

INTERNAL MODE (Master + Headphones)

DJ ProMixer Numark Omni Control ASIO Internal

DJ ProMixer Numark Omni control Audio Rear Internal

For Internal Mode connect your output in (Output 1) RCA  connectors (L+R) for Master Output.
Connect your headphones in front ( ¼ TSR stereo connector).

EXTERNAL MODE (Deck A + Deck B connected to external mixer)

DJ ProMixer Numark Omni Control ASIO External

DJ ProMixer Numark Omni Control Audio Rear External

For External Mode connect your outputs 1.- RCA  connectors (L+R) for Deck A (Output 1), and  2.- RCA connectors (L+R) for Deck B (Output 2).

MIDI SET UP

DJ ProMixer Numark Omni Control MIDI

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (Numark OMNI CONTROL MIDI0) and select on the right side NUMARK OMNI CONTROL.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

TWO MIDI MAPS

Overview

DJ ProMixer Numark Omni control MIDI map

(Click to enlarge)

Detail

 DJ ProMixer Numark Omni control MIDI map detail

1.-   PLAY
2.-   PAUSE
3.-   CUE
4.-   PITCH
5.-   SYNC
6.-   KEYLOCK
7.-   PFL
8.-   MANUAL LOOP (1.- IN  2.- OUT / EXIT / RELOOP)
9.-   PITCH BEND
10.- CHANGE FOCUS TREE / TRACKLIST
11.- SCROLL / LOAD / ENTER
12.- LOAD TRACK
13.- FX DRY / WET
14.- FX PARAMETER
15.- MID MAP 1 AND MIDI MAP 2 – FX – ECHO
16.- MIDI MAP 1 FX – FLANGER / MIDI MAP 2 – SCRATCH
17.- MIDI MAP 1 SAMPLER 1 / MIDI MAP 2 – FX FLANGER
18.- MIDI MAP 1 SAMPLER 2 / MIDI MAP 2 – FX WAH
19.- FX ECHO BEAT SYNC
20.- SAMPLER VOLUMEN
21.- PFL VOLUMEN (A AND B)
22.- ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS) / KILL = PUSH (HI, MID, BASS)
23.- VOLUMEN CONTROLS AND CROSSFADER
24.- WHEELS

info mapping                    info PDF

Citronic MP-X10

HOW TO SET UP?

The system must recognize your Citronic MPCD-X3 as Audio and MIDI device before configuring in DJ ProMixer.

AUDIO AND MIDI SETTINGS

——————————————————————————————————————– IMPORTANT: Install the drivers provided for the manufacturer and check this configuration to install your device
——————————————————————————————————————–

MIDI MAP
Overview

DJ ProMixer Citronic-mp-x10 map

Detail

DJ ProMixer Citronic-mp-x10 map detail

1.-     PLAY / PAUSE
2.-     CUE
3.-     AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS) IN  EXIT / RELOOP IN
4.-    TRACK SCROLL / PUSH (LOAD)
5.-    FOLDER SCROLL / PUSH (OPEN-CLOSE)
6.-    CUE LOOP MEMORY (1 TO 4) (NORMAL MODE) / SAMPLES (1 TO 4) (SAMPLE BUTTON ACTIVATED)
7.-    MEMORIZE CUE / LOOP POINT
8.-    DELETE CUE /LOOP POINT
9.-    ENABLE SAMPLER (HOLD BUTTON) (SAMPLES 1,2,3,4)
10.-  FX ECHO
11.-  FX FLANGER
12.-  FX WAH
13.-  REVERSE
14.-  BRAKE
15.-  WHEEL MODE: FX PARAMETER
16.-  WHEEL MODE: VINYL
17.-  WHEEL MODE: SEARCH
18.-  PFL
19-  CHANGE TEMPO RANGE (4%, 8%, 10%, 12%, 16%, 32%)
20-  KEYLOCK
21-  MOVE WITH ACTIVE FUNCTION (CUE/LOOP MEMORY  OR ACTIVE AUTO LOOP)
22-  PITCH
23.- BEND (BUTTONS)
24.- BEND (WHEEL)
25.- SCRATCH
26.- SYNC
27.- ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS)
28.- DECK´S VOLUMEN CONTROLS AND CROSSFADER

info mapping                    info PDF

Audiophony DJinn Pro

HOW TO SET UP?

The system must recognize your Audiophony DJinn Pro as Audio and MIDI device before configuring in DJ ProMixer.

AUDIO AND MIDI SETTINGS

——————————————————————————————————————– IMPORTANT: Install the drivers provided for the manufacturer and check this configuration to install your device
——————————————————————————————————————–

MIDI MAP
Overview

DJ ProMixer Audiophony DJinn Pro  map

Detail

DJ ProMixer Audiophony DJinn Pro  map detail

1.-     PLAY / PAUSE
2.-     CUE
3.-     AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS) IN  EXIT / RELOOP IN
4.-    TRACK SCROLL / PUSH (LOAD)
5.-    FOLDER SCROLL / PUSH (OPEN-CLOSE)
6.-    CUE LOOP MEMORY (1 TO 4) (NORMAL MODE) / SAMPLES (1 TO 4) (SAMPLE BUTTON ACTIVATED)
7.-    MEMORIZE CUE / LOOP POINT
8.-    DELETE CUE /LOOP POINT
9.-    ENABLE SAMPLER (HOLD BUTTON) (SAMPLES 1,2,3,4)
10.-  FX ECHO
11.-  FX FLANGER
12.-  FX WAH
13.-  REVERSE
14.-  BRAKE
15.-  WHEEL MODE: FX PARAMETER
16.-  WHEEL MODE: VINYL
17.-  WHEEL MODE: SEARCH
18.-  PFL
19-  CHANGE TEMPO RANGE (4%, 8%, 10%, 12%, 16%, 32%)
20-  KEYLOCK
21-  MOVE WITH ACTIVE FUNCTION (CUE/LOOP MEMORY  OR ACTIVE AUTO LOOP)
22-  PITCH
23.- BEND (BUTTONS)
24.- BEND (WHEEL)
25.- SCRATCH
26.- SYNC
27.- ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS)
28.- DECK´S VOLUMEN CONTROLS AND CROSSFADER

info mapping                    info PDF

American Audio Versadeck

HOW TO SET UP?

The system must recognize your American audio Versadeck as Audio and MIDI device before configuring in DJ ProMixer.

AUDIO AND MIDI SETTINGS

——————————————————————————————————————– IMPORTANT: Install the drivers provided for the manufacturer and check this configuration to install your device
——————————————————————————————————————–

MIDI MAP
Overview

DJ ProMixer American Audio Versadeck map

Detail

DJ ProMixer American Audio Versadeck map detail

1.-     PLAY / PAUSE
2.-     CUE
3.-     AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS) IN  EXIT / RELOOP IN
4.-    TRACK SCROLL / PUSH (LOAD)
5.-    FOLDER SCROLL / PUSH (OPEN-CLOSE)
6.-    CUE LOOP MEMORY (1 TO 4) (NORMAL MODE) / SAMPLES (1 TO 4) (SAMPLE BUTTON ACTIVATED)
7.-    MEMORIZE CUE / LOOP POINT
8.-    DELETE CUE /LOOP POINT
9.-    ENABLE SAMPLER (HOLD BUTTON) (SAMPLES 1,2,3,4)
10.-  FX ECHO
11.-  FX FLANGER
12.-  FX WAH
13.-  REVERSE
14.-  BRAKE
15.-  WHEEL MODE: FX PARAMETER
16.-  WHEEL MODE: VINYL
17.-  WHEEL MODE: SEARCH
18.-  PFL
19-  CHANGE TEMPO RANGE (4%, 8%, 10%, 12%, 16%, 32%)
20-  KEYLOCK
21-  MOVE WITH ACTIVE FUNCTION (CUE/LOOP MEMORY  OR ACTIVE AUTO LOOP)
22-  PITCH
23.- BEND (BUTTONS)
24.- BEND (WHEEL)
25.- SCRATCH
26.- SYNC
27.- ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS)
28.- DECK´S VOLUMEN CONTROLS AND CROSSFADER

info mapping                    info PDF

Akiyama Syncron

HOW TO SET UP?

The system must recognize your Akiyama Syncron as Audio and MIDI device before configuring in DJ ProMixer.

Akiyama Syncron only requires download and install Akiyama ASIO Driver, once installed you can configure it in DJ ProMixer.

 AUDIO SET UP

Akiyama Syncron has two different configurations (for Internal or External Mode):

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Akiyama Syncron as Audio Sound Card.

AUDIO SETTINGS

INTERNAL MODE (Master + Headphones)

DJ ProMixer Akiyama Syncron ASIO

DJ ProMixer Akiyama Syncron Rear internal

 

 

For Internal Mode choose your output: 1.- for XLR connectors (balanced)  or 2.- for RCA (unbalanced) (1+2).

 

EXTERNAL MODE (Deck A + Deck B connected to external mixer)

DJ ProMixer Akiyama Syncron ASIO external

DJ ProMixer Akiyama Syncron Rear external

For External Mode connect your outputs 1.- RCA  connectors (L+R) for Deck A, and  2.- RCA connectors (L+R) for Deck B.

MIDI SET UP

 DJ ProMixer Akiyama Syncron MIDI

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (SYNCRON0) and select on the right side AKIYAMA SYNCRON.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI  MAP

Overview

DJ ProMixer Akiyama Syncron map

 

Detail

 DJ ProMixer Akiyama Syncron map detail


1.-     PLAY / PAUSE
2.-     CUE
3.-     AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS) IN  EXIT / RELOOP IN
4.-    TRACK SCROLL / PUSH (LOAD)
5.-    FOLDER SCROLL / PUSH (OPEN-CLOSE)
6.-    CUE LOOP MEMORY (1 TO 4) (NORMAL MODE) / SAMPLES (1 TO 4) (SAMPLE BUTTON ACTIVATED)
7.-    MEMORIZE CUE / LOOP POINT
8.-    DELETE CUE /LOOP POINT
9.-    ENABLE SAMPLER (HOLD BUTTON) (SAMPLES 1,2,3,4)
10.-  FX ECHO
11.-  FX FLANGER
12.-  FX WAH
13.-  REVERSE
14.-  BRAKE
15.-  WHEEL MODE: FX PARAMETER
16.-  WHEEL MODE: VINYL
17.-  WHEEL MODE: SEARCH
18.-  PFL
19-  CHANGE TEMPO RANGE (4%, 8%, 10%, 12%, 16%, 32%)
20-  KEYLOCK
21-  MOVE WITH ACTIVE FUNCTION (CUE/LOOP MEMORY  OR ACTIVE AUTO LOOP)
22-  PITCH
23.- BEND (BUTTONS)
24.- BEND (WHEEL)
25.- SCRATCH
26.- SYNC
27.- ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS)
28.- DECK´S VOLUMEN CONTROLS AND CROSSFADER

info mapping                    info PDF

Denon SC 2000

HOW TO SET UP?

The system must recognize your Denon SC-2000 device before configuring in DJ ProMixer.

IMPORTANT: Denon SC 2000 has not integrated audio device/s. For audio configuration choose your work mode and audio sound card/s.

MIDI CONFIGURATION

Single Mode (2 Denon SC 2000 Connected)

DJ ProMixer Denon SC 2000 MIDI single

 

Select in MIDI PORT / MIDI MAP 1 on the left side one device (DN-SC20000) and select on the right side DENON SC 2000 SINGLEA.XML. Select in MIDI PORT / MIDI MAP 2 on the left side the other device (DN-SC20001) and select on the right side DENON SC 2000 SINGLEB.XML

Dual Mode

DJ ProMixer Denon SC 2000  MIDI dual

 

Select in MIDI PORT / MIDI MAP 1 on the left side your Denon SC 2000 (DN-SC20000) and select on the right side DENON SC 2000 (A AND B).XML. Nothing selected in MIDI PORT / MIDI MAP 2

How to change the decks? Denon SC-2000 has a specific button to select the deck.

DJ ProMixer Change Deck Denon SC 2000

 

 

MIDI MAP

DJ ProMixer Denon SC 2000 map

 

  1.- PLAY / PAUSE
  2.- CUE
  3.- SAMPLER SELECTOR: OFF (CUE / LOOP MEMORY: 1,2,3,4) – ON (SAMPLER:1,2,3,4)
  4.- CUE LOOP MEMORY (1,2,3,4) DIRECT BUTTONS (SELECTOR OFF)
  5.- SAMPLER (1,2,3,4) DIRECT BUTTONS (SELECTOR ON)
  6.- MANUAL LOOP (LOOP IN – IN / LOOP OUT – OUT, EXIT, RELOOP)
  7.- AUTO LOOP (IN – STARTS 4 BEATS, EXIT, RELOOP)
  8.- MOVE DOWN (-) / MOVE UP (+) AUTO LOOP
DIRECT AUTO LOOP (IN / EXIT) (STARTS IN 4 BEATS)

  9.- CHANGE DECK (ONLY DUAL MODE) BLUE COLOR: DECK A, RED COLOR:DECK B
10.- TRACK SCROLL / PUSH (LOAD) 
11.- SELECTOR AUTOLOOP / FX BEAT << MOVE DOWN / MOVE UP>>
12.- CHANGE FOCUS PLAYLIST / GROUPS-SUBGROUPS / EXPLORER
13.- FOLDER (OPEN-CLOSE)
14.- FX DRY / WET
15.- FX ECHO BEAT SYNC (FROM 2/1 TO 1/8 BEATS)

16.- PITCH BEND
17.- FX (ECHO)
18.- FX (FLANGER)
19.- KEYLOCK

20.- SYNC
21.- BEND (BUTTONS)
22.- BEND (WHEEL)
23.- SCRATCH (WHEEL)
24.- PITCH
25.- MEMORIZE CUE / LOOP POINT
26.- MOVE WITH ACTIVE FUNCTION (CUE/LOOP MEMORY  OR ACTIVE AUTO LOOP)

info mapping                    info PDF

 

Numark Mixtrack Quad

HOW TO SET UP?

The system must recognize your Numark Mixtrack Quad as Audio and MIDI device before configuring in DJ ProMixer.

AUDIO SETTINGS

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Mixtrack Quad as Audio Sound Card.
Note: You do not need install additionals audio drivers, once connected is just plug and play.

DJ ProMixer Audio Mixtrack Pro II

Connect your output in (1) RCA  connectors (L+R) for Master Output.

Connect your headphones in front ( ¼ TSR stereo connector).

Important: Numark Mixtrack Quad is designed to be used as internal mode (with internal Sound Card using master output  & headphones) or external mode (using the internal soundcard for each deck).

MIDI SET UP

DJ ProMixer MIDI Mixtrack 2

 

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (MixTrack Quad) and select on the right side NUMARK MIXTRACK QUAD.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

Overview
DJ ProMixer Mixtrack Quad map
(Click to enlarge)

Detail

DJ ProMixer Mixtrack Quad map detail

 

1.-   PLAY / PAUSE
2.-   CUE
3.-   SYNC
4.-   CHANGE FOCUS THREE / TRACKLIST (SHIFT SELECTOR)
5.-   SHIFT + PAD 5 = LOOP SELECTION (AUTO AND MANUAL)
6.-   SHIFT + PAD 6 = SAMPLES SELECTION (1,2,3,4)
7.-   SHIFT + PAD 7 = CUE / LOOP MEMORY SELECTION (1,2,3,4)
8.-   BEND (BUTTONS)
9.-   FX DRY / WET
10.- FX PARAMETER
11.- FX SYNC (FROM 2/1 TO 1/8 BEATS)
12.- SAMPLER VOLUMEN
13.- FX 1, FX 2, FX 3
14.- AUTO LOOP X2
15.- LOAD DECK
16.- CROSSFADER
17.- PFL
18.-TRACKLIST SCROLL
19.- ROTARY KNOBS OF THE MIXER (HI, MID,BASS)
20.- DECK´S VOLUMEN CONTROLS
21.- BEND (WHEEL)
22.- SCRATCH
23.- ENABLE WHEEL VINYL MODE
24.- PITCH

25.- HEADPHONES VOLUMEN (A AND B)

info mapping                    info PDF

Numark Mixtrack / Pro II

HOW TO SET UP?

The system must recognize your Numark Mixtrack / Pro II as Audio Device (only Mixtrack Pro II) and MIDI Device (for booth models) before configuring in DJ ProMixer.

AUDIO SETTINGS

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Mixtrack Pro II as Audio Sound Card.
Note: You do not need install additionals audio drivers, once connected is just plug and play.

 DJ ProMixer Audio Mixtrack Pro II

Connect your output in (1) RCA  connectors (L+R) for Master Output.

Connect your headphones in front ( ¼ TSR stereo connector).

Important: Numark Mixtrack Pro is designed to be used as internal mode (with internal Sound Card using master output  & headphones) or external mode (using the internal soundcard for each deck).

Numark Mixtrack II have not soundcard, it´s only MIDI Controller.

MIDI SET UP

DJ ProMixer MIDI Mixtrack 2

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (MixTrack / Pro II) and select on the right side NUMARK MIXTRACK PRO II.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI MAP

Overview
Mixtrack Pro II Map_2
(Click to enlarge)

Detail

DJ ProMixer Mixtrack Pro II Map detail

1.-   PLAY / PAUSE
2.-   CUE
3.-   SYNC
4.-   SHIFT SELECTOR
5.-   SHIFT + PAD 5 = LOOP SELECTION (AUTO AND MANUAL)
6.-   SHIFT + PAD 6 = SAMPLES SELECTION (1,2,3,4)
7.-   SHIFT + PAD 7 = CUE / LOOP MEMORY SELECTION (1,2,3,4)
8.-   BEND (BUTTONS)
9.-   FX DRY / WET
10.- FX PARAMETER
11.- FX ECHO BEAT SYNC (FROM 2/1 TO 1/8 BEATS)
12.- SAMPLER VOLUMEN
13.- FX 1, FX 2, FX 3
14.- AUTO LOOP X2
15.- LOAD DECK
16.- CHANGE FOCUS TREE / TRACKLIST
17.- PFL
18.-TRACKLIST SCROLL
19.- ROTARY KNOBS OF THE MIXER (HI, MID,BASS)
20.- DECK´S VOLUMEN CONTROLS AND CROSSFADER
21.- BEND (WHEEL)
22.- SCRATCH
23.- ENABLE WHEEL VINYL MODE
24.- PITCH

25.- HEADPHONES VOLUMEN (A AND B)

info mapping                    info PDF

Denon DN MC 6000 MKII

HOW TO SET UP?

The system must recognize your Denon DN-MC 6000 MKII as Audio and MIDI device before configuring in DJ ProMixer.

Denon DN-MC 6000 MKII only requires download and install Denon DJ Asio Driver, once installed you can configure it in DJ ProMixer.

DJ ProMixer Driver ASIO Denon DJ

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your DN-MC6000 MKII as Audio Sound Card.

CONFIGURE YOUR AUDIO SETTINGS

DJ ProMixer Denon MC-6000 MKII ASIO

DJ ProMixer Denon MC6000MK2 Audio Outputs

For Internal Mode choose your output (1.- for XLR connectors or 2.- for RCA). Additional output 3.- Booth / Send Out
Important: DN-MC6000 MKII is designed to be used as internal mode (with internal Sound Card), but you can use also with DJ ProMixer as external mode (with other/s Sound Card/s and external mixer).

MIDI CONFIGURATION

DJ ProMixer Denon MIDI  MC - 6000 MKII

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (DN-MC6000 MKII) and select on the right side DENON MC6000MKII.XML.  MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI  MAP

DJ ProMixer Denon MC6000 MKII Map(Click to enlarge)

                                                                  Detail

DJ ProMixer Denon MC6000 MKII Map Detail

1.-   PLAY / PAUSE
2.-   CUE
3.-   MANUAL LOOP (1.- IN  2.- OUT – EXIT – RELOOP)
4.-   AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS) IN / EXIT / RELOOP MOVE WITH “-“ 1/2 AND “+” x2
5.-   SELECTOR CUE / LOOP – SAMPLES
6.-   KEYLOCK
7.-   EFFECTS DIRECT BUTTONS FX 1, FX 2, FX3
8.-   CUE / LOOP MEMORY (4 DIRECT BUTTONS) (SELECTOR 5 OFF)
8.-  SAMPLER DIRECT BUTTONS (1, 2, 3, 4) (SELECTOR 5 ON)
9.-   MEMORY CUE / LOOP (SHIFT BUTTON)
10.- FX ECHO BEAT SYNC (FROM 2/1 TO 1/8 BEATS)
11.- FX DRY / WET
12.- FX PARAMETER
13.- ENABLE WHEEL VINYL MODE
14.- TRACKLIST SCROLL / CHANGE FOCUS
15.- LOAD DECK
16.- CHANNEL SELECTOR
17.- PFL
18.- ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS)
19.- DECK´S VOLUMEN CONTROLS AND CROSSFADER
20.- PITCH
21.- SYNC
22.- BEND (WHEEL)
23.- BEND (BUTTONS)
24.- SCRATCH
25.- BRAKE
26.- CHANGE FOCUS TREE / PLAYLIST

info mapping                    info PDF

Denon DN MC 2000

HOW TO SET UP?

The system must recognize your Denon DN-MC2000 as Audio and MIDI device before configuring in DJ ProMixer.

Denon DN-MC 2000 only requires download and install Denon DJ Asio Driver, once installed you can configure it in DJ ProMixer.

DJ ProMixer MC 2000 Denon Asio Driver

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Denon DN-MC 2000 as Audio Sound Card.

AUDIO SET UP

DJ ProMixer Denon MC-2000 ASIO

Important: DN-MC 2000 is designed to be used as internal mode (with internal Sound Card), but you can use also with DJ ProMixer as external mode (with other/s Sound Card/s and external mixer).

MIDI SET UP

 DJ ProMixer Denon MC-2000 MIDI

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (DN-MC3000) and select on the right side DENON MC3000.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI  MAP

Overview

DJ ProMixer Denon MC2000 Map

Detail

DJ ProMixer MC2000 Map Detail

1.-  PLAY / PAUSE
2.-  CUE
3.-  MANUAL LOOP (1.- IN  2.- OUT – EXIT – RELOOP)
4.-  AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS) IN  EXIT / RELOOP MOVE WITH “-“ 1/2 AND “+” x2
5.-  SELECTOR CUE (1,2,3,4) / SAMPLES (1,2,3,4)
6.-  KEYLOCK
7.-  EFFECTS DIRECT BUTTONS FX 1, FX 2, FX3
8.-  CUE / LOOP MEMORY (4 DIRECT BUTTONS) (SELECTOR OFF)
9.-  SAMPLES (4 DIRECT BUTTONS) (SELECTOR ON)
10.- FX ECHO BEAT SYNC (FROM 2/1 TO 1/8 BEATS)
11.- FX DRY / WET
12.- FX PARAMETER
13.- ENABLE WHEEL VINYL MODE
14.- TRACKLIST SCROLL
15.- LOAD DECK
16.- ROTARY KNOBS OF THE MIXER (GAIN, HI, MID,BASS)
17.- PFL
18.- DECK´S VOLUMEN CONTROLS AND CROSSFADER
19.- SAMPLER VOLUMEN
20.- PITCH
21.- SYNC
22.- BEND (WHEEL)
23.- BEND (BUTTONS)
24.- SCRATCH
25.- TRACKLIST SELECTOR (PLAYLIST, GROUPS, EXPLORER)
26.- MEMORY CUE / LOOP DECK A
27.- MEMORY CUE / LOOP DECK B
28.- CHANGE FOCUS TREE
29.- CHANGE FOCUS TRACKS

info mapping                    info PDF

Numark Mixdeck

HOW TO SET UP?

The system must recognize your Numark Mixdeck as Audio and MIDI Device before configuring in DJ ProMixer.
Numark Mixdeck only requires download and install Numark Asio Driver.

DJ Promixer Driver Audio Numark Mixdeck

Open DJ ProMixer and go to “Config” and open “Audio Setup”, here you can select your Numark Mixdeck as Audio Sound Card.

AUDIO SETTINGS

DJ ProMixer Numark Mixdeck Audio Set Up

DJ ProMixer Numark Mixdeck front

For Internal Mode choose your output: 1.- for XLR connectors (balanced)  or 2.- for RCA (unbalanced).

Important: Numark Mixdeck is designed to be used as internal mode (with internal Sound Card), but you can use also with DJ ProMixer as external mode (with other/s Sound Card/s and external mixer).

MIDI SET UP

DJ ProMixer Numark Mixdeck MIDI

In “Config” go to “MIDI Controllers” and then select in MIDI PORT / MIDI MAP 1 on the left side one device (Numark Mixdeck) and select on the right side NUMARK MIXDECK.XML. MIDI PORT / MIDI MAP 2: Nothing Selected.

MIDI  MAP

Overview

DJ ProMixer Numark Mixdeck map

Detail

DJ ProMixer Numark Mixdeck map detail

1.- PLAY
2.- PAUSE

3.- CUE

4.- CHANGE FOCUS PLAYLIST / GROUPS-SUBGROUPS / EXPLORER
 
5.- SCROLL / LOAD / ENTER

6.- CHANGE FOCUS TREE / TRACKLIST
7.- REVERSE / BRAKE

8.- MANUAL LOOP (IN – OUT – EXIT / RELOOP) DIRECT AUTO LOOP (IN / EXIT) (STARTS IN 4 BEATS)

9.- AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)

10.- SEARCH (WHEEL MODE) 
11.- CUE / LOOP MEMORY (1, 2, 3) (NORMAL MODE) / SAMPLES (1, 2, 3 WITH SAMPLER BUTTON ACTIVATED)
12.- SAMPLER MODE ON / OFF
13.- MEMORIZE CUE / LOOP
14.- KEYLOCK
15.- PITCH

16.- PITCH BEND
17.- SYNC
18.- FX 1 (ECHO) LEFT (ON) CENTER (OFF) – FX 2 (FLANGER) RIGHT (ON) CENTER (OFF)
19.- FX 3 (WAH)

20.- FX DRY / WET
21.- FX PARAMETER
22.- BEND (WHEEL)
23.- SCRATCH (WHEEL)
24.- DECK VOLUMEN
25.- HEADPHONES VOLUMEN
26.- DECK SELECTOR (DECK A / DECK B) (ONLY DUAL MODE)
27.-
LINK TO PC (SOURCE)

info mapping                    info PDF

Numark NDX 900

HOW TO SET UP?

The system must recognize your Numark NDX-900 device/s before configuring in DJ ProMixer.
IMPORTANT: Numark NDX-900 is a MIDI and audio sound card device

MIDI CONFIGURATION

Single Mode (2 Numark NDX-900 Connected)

DJ ProMixer MIDI NDX 900 Single

Select in MIDI PORT / MIDI MAP 1 on the left side one device (Numark NDX900 0) and select on the right side NUMARK NDX-900(SINGLE A).XML. Select in MIDI PORT / MIDI MAP 2 on the left side the other device (Numark NDX900 I) and select on the right side NUMARK NDX-900(SINGLE B).XML

Dual Mode

DJ ProMixer MIDI NDX 900 Dual

Select in MIDI PORT / MIDI MAP 1 on the left side Numark NDX900 0, and select on the right side NUMARK NDX-900 (A AND B).XML. Nothing selected in MIDI PORT / MIDI MAP 2 How to change the decks? Two ways: 1.- Hardware: Use the “Eject Button”. 2.- Software: By clicking the headphone button of the deck.

Load button

AUDIO CONFIGURATION

Open DJ ProMixer and go to “Config”, open “Audio Setup”, here you can select your Numark NDX-900 as Audio Sound Card.

DJ ProMixer MIDI CD Audio

MIDI MAP

DJ ProMixer Numark NDX 900 Map

1.- PLAY
2.- PAUSE

3.- CUE

4.- CHANGE FOCUS PLAYLIST / GROUPS-SUBGROUPS / EXPLORER
 
5.- SCROLL / LOAD / ENTER

6.- CHANGE FOCUS TREE / TRACKLIST
7.- REVERSE / BRAKE

8.- MANUAL LOOP (IN – OUT – EXIT / RELOOP) DIRECT AUTO LOOP (IN / EXIT) (STARTS IN 4 BEATS)

9.- AUTOLOOP FROM ¼ TO 32 BEATS (STARTS IN 4 BEATS)

10.- SEARCH (WHEEL MODE) 
11.- CUE / LOOP MEMORY (1, 2, 3) (NORMAL MODE) / SAMPLES (1, 2, 3 WITH SAMPLER BUTTON ACTIVATED)
12.- SAMPLER MODE ON / OFF
13.- MEMORIZE CUE / LOOP
14.- KEYLOCK
15.- PITCH

16.- PITCH BEND
17.- SYNC
18.- FX 1 (ECHO) LEFT (ON) CENTER (OFF) – FX 2 (FLANGER) RIGHT (ON) CENTER (OFF)
19.- FX 3 (WAH)

20.- FX DRY / WET
21.- FX PARAMETER
22.- BEND (WHEEL)
23.- SCRATCH (WHEEL)
24.- DECK VOLUMEN
25.- HEADPHONES VOLUMEN
26.- DECK SELECTOR (DECK A / DECK B) (ONLY DUAL MODE)
27.-
LINK TO PC (SOURCE)

info mapping                    info PDF

MIDI CD Controllers (single or dual mode) -no audio sound card-

HOW TO SET UP?
The system must recognize your MIDI CD controller/s before configuring in DJ ProMixer.

IMPORTANT:
– Check and install the drivers of your device from the oficial website.

Plug your MIDI CD Controller and go to “Config” to configurate it.

MIDI CONFIGURATION

Single Mode (2 MIDI CD Controllers connected) DJ ProMixer MIDI NDX 800 Single

Select in MIDI PORT / MIDI MAP 1 on the left side one MIDI CD Controller device and select on the right side the SINGLE A.XML map. Select in MIDI PORT / MIDI MAP 2 on the left side the other MIDI CD Controller device and select on the right side the SINGLE B.XML map

Dual Mode MIDI NDX 800 Dual

Select in MIDI PORT / MIDI MAP 1 on the left side your MIDI CD Controller device, and select on the right side the (A AND B).XML map. Nothing selected in MIDI PORT / MIDI MAP 2

How to change the decks? Two ways: 1.- Hardware: Check the assigned button at MIDI map. 2.- Software: By clicking the headphone button of the deck.

MIDI CD Controllers (single or dual mode) -with audio sound card-

HOW TO SET UP?
The system must recognize your MIDI CD controller/s before configuring in DJ ProMixer.

IMPORTANT:
– Check and install the drivers of your device from the oficial website.

Plug your MIDI CD Controller and go to “Config” to configurate it.

MIDI CONFIGURATION

Single Mode (2 MIDI CD Controllers connected) DJ ProMixer MIDI NDX 800 Single

Select in MIDI PORT / MIDI MAP 1 on the left side one MIDI CD Controller device and select on the right side the SINGLE A.XML map. Select in MIDI PORT / MIDI MAP 2 on the left side the other MIDI CD Controller device and select on the right side the SINGLE B.XML map

Dual Mode MIDI NDX 800 Dual

Select in MIDI PORT / MIDI MAP 1 on the left side your MIDI CD Controller device, and select on the right side the (A AND B).XML map. Nothing selected in MIDI PORT / MIDI MAP 2

How to change the decks? Two ways: 1.- Hardware: Check the assigned button at MIDI map. 2.- Software: By clicking the headphone button of the deck.

AUDIO CONFIGURATION

Open DJ ProMixer and go to “Config” open “Audio Setup”, here you can select your MIDI CD Controller as Audio Sound Card.
There are two ways to connect your device/s as Audio Sound Card (It depends of the drivers of the manufacturer):

1.- ASIO Driver Mode (If it is supported)

DJ ProMixer MIDI CD ASIO

 

2.- Direct sound

DJ ProMixer MIDI CD Audio